All MIBs › TN-IEEE8021-CFM-MIB › tnDot1agCfmMcLagConfigPropHoldTime
tnDot1agCfmMcLagConfigPropHoldTime
Module: TN-IEEE8021-CFM-MIB
OID (symbolic): TN-IEEE8021-CFM-MIB::tnDot1agCfmMcLagConfigPropHoldTime
OID (numeric): 1.3.6.1.4.1.7483.6.1.2.52.2.1.1.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The value of tnDot1agCfmMcLagConfigPropHoldTime specifies the duration, in seconds, of a timer that is activated when an MC-LAG port or protocol changes state. While the timer is active, no fault set or clear is propagated to the MC-LAG SAP's CFM MEP.
The outstanding hold time can be monitored by polling the value of sapEthCfmMcLagPropHoldTimeRemain for a particular SAP. When set to the value zero (0), no delay in response to a port or protocol change will be observed.
This object is meaningful only when tnDot1agCfmMcLagConfigStdbyInactive is set to the value 'enabled (1)', otherwise an SNMP Set operation will result in an inconsistentValue error and the result of an SNMP Get operation will be undefined.
What is tnDot1agCfmMcLagConfigPropHoldTime?
Sets, in seconds (0-60, default 1), a hold-down timer that suppresses fault propagation to the MC-LAG SAP's CFM MEP whenever the MC-LAG port or protocol changes state, so brief state flaps don't trigger spurious faults; it only takes effect when tnDot1agCfmMcLagConfigStdbyInactive is enabled, and its remaining time can be monitored via sapEthCfmMcLagPropHoldTimeRemain.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7483.6.1.2.52.2.1.1.2 snmpwalk -v2c -c public <target> TN-IEEE8021-CFM-MIB::tnDot1agCfmMcLagConfigPropHoldTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7483.6.1.2.52.2.1.1.2.1 snmpget -v2c -c public <target> TN-IEEE8021-CFM-MIB::tnDot1agCfmMcLagConfigPropHoldTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7483.6.1.2.52.2.1.1.2.1 i <value>
Start monitoring Nokia 7x50 series carrier Ethernet/service router (802.1ag CFM MEP/AIS status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TN-IEEE8021-CFM-MIB::tnDot1agCfmMcLagConfigPropHoldTime OID value, configure state conditions and alerts, and monitor any Nokia 7x50 series carrier Ethernet/service router (802.1ag CFM MEP/AIS status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7483 | tropic | TROPIC-GLOBAL-REG |
| 1.3.6.1.4.1.7483.6 | tnProducts | TROPIC-GLOBAL-REG |
| 1.3.6.1.4.1.7483.6.1 | tnSRMIB | TROPIC-GLOBAL-REG |
| 1.3.6.1.4.1.7483.6.1.2 | tnSRObjs | TROPIC-GLOBAL-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7483.6.1.2.52 | tnDot1agMIBObjs | TN-IEEE8021-CFM-MIB |
| 1.3.6.1.4.1.7483.6.1.2.52.2 | tnDot1agCfmGlobalObjs | TN-IEEE8021-CFM-MIB |
| 1.3.6.1.4.1.7483.6.1.2.52.2.1 | tnDot1agCfmMcLagConfigTable | TN-IEEE8021-CFM-MIB |
| 1.3.6.1.4.1.7483.6.1.2.52.2.1.1 | tnDot1agCfmMcLagConfigEntry | TN-IEEE8021-CFM-MIB |
| 1.3.6.1.4.1.7483.6.1.2.52.2.1.1.2 | tnDot1agCfmMcLagConfigPropHoldTime | TN-IEEE8021-CFM-MIB |