All MIBs › TIMETRA-IEEE8021-CFM-MIB › tmnxDot1agCfmSLMInactivityTimer
tmnxDot1agCfmSLMInactivityTimer
Module: TIMETRA-IEEE8021-CFM-MIB
OID (symbolic): TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmSLMInactivityTimer
OID (numeric): 1.3.6.1.4.1.6527.3.1.2.52.2.2.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The value of tmnxDot1agCfmSLMInactivityTimer specifies the duration, in seconds, that the system will maintain Synthetic Loss Measurement (SLM) reply (SLR) data for individual two-way tests in the absence of receiving SLM frames.
The system may be blocked in responding to new two-way SLM tests due to an excessive inactive timer duration. In this case, reducing this object's value, thus reducing the retention time for existing latent SLR test data, will help free test resources allowing the system to respond to new two-way SLM tests.
What is tmnxDot1agCfmSLMInactivityTimer?
This value specifies, in seconds (10 to 100), how long the system retains Synthetic Loss Measurement (SLM) reply data for individual two-way tests when it stops receiving SLM frames. An admin reduces this value if the system is refusing new two-way SLM tests due to resource exhaustion, freeing up test resources faster by shortening how long stale test data is retained. It's a resource-management tuning knob an admin touches only when running into SLM test-capacity limits, not a routine configuration setting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.52.2.2.1 snmpwalk -v2c -c public <target> TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmSLMInactivityTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.52.2.2.1.1 snmpget -v2c -c public <target> TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmSLMInactivityTimer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6527.3.1.2.52.2.2.1.1 i <value>
Start monitoring Alcatel-Lucent (Nokia) SROS service routers and switches (802.1ag CFM MEP/SDP binding status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmSLMInactivityTimer OID value, configure state conditions and alerts, and monitor any Alcatel-Lucent (Nokia) SROS service routers and switches (802.1ag CFM MEP/SDP binding status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6527 | timetra | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3 | timetraProducts | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3.1 | tmnxSRMIB | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3.1.2 | tmnxSRObjs | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.52 | tmnxDot1agMIBObjs | TIMETRA-IEEE8021-CFM-MIB |
| 1.3.6.1.4.1.6527.3.1.2.52.2 | tmnxDot1agCfmGlobalObjs | TIMETRA-IEEE8021-CFM-MIB |
| 1.3.6.1.4.1.6527.3.1.2.52.2.2 | tmnxDot1agCfmSLMConfigGroup | TIMETRA-IEEE8021-CFM-MIB |
| 1.3.6.1.4.1.6527.3.1.2.52.2.2.1 | tmnxDot1agCfmSLMInactivityTimer | TIMETRA-IEEE8021-CFM-MIB |