All MIBs › TIMETRA-IEEE8021-CFM-MIB › tmnxDot1agCfmMcLagStdbyInactive
tmnxDot1agCfmMcLagStdbyInactive
Module: TIMETRA-IEEE8021-CFM-MIB
OID (symbolic): TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmMcLagStdbyInactive
OID (numeric): 1.3.6.1.4.1.6527.3.1.2.52.2.1.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: The value of tmnxDot1agCfmMcLagStdbyInactive specifies whether or not ETH-CFM MEPs configured on Multi-Chassis LAG ports are aware of MC-LAG port active/standby states.
When this object is 'true (1)', MEPs configured on a Multi-Chassis LAG port will act as if they are administratively shutdown if running on a standby port, and will only be operational on an active MC-LAG port.
When this object is 'false (2)', MEPs configured on a Multi-Chassis LAG port will operate regardless of the MC-LAG port active and standby states.
What is tmnxDot1agCfmMcLagStdbyInactive?
This boolean specifies whether MEPs configured on Multi-Chassis LAG (MC-LAG) ports are aware of the port's active/standby state: when true, a MEP on a standby port behaves as if administratively shut down and only operates on the active port; when false, MEPs operate regardless of MC-LAG state. An admin enables this in an MC-LAG deployment so CFM only actively monitors and alarms via the currently-active side, avoiding confusing dual-active-looking MEP behavior across both chassis. This setting must be enabled for tmnxDot1agCfmMcLagPropHoldTime to have any effect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.52.2.1.1 snmpwalk -v2c -c public <target> TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmMcLagStdbyInactive
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.52.2.1.1.1 snmpget -v2c -c public <target> TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmMcLagStdbyInactive.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6527.3.1.2.52.2.1.1.1 s <value>
Start monitoring Alcatel-Lucent (Nokia) SROS service routers and switches (802.1ag CFM MEP/SDP binding status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmMcLagStdbyInactive OID value, configure state conditions and alerts, and monitor any Alcatel-Lucent (Nokia) SROS service routers and switches (802.1ag CFM MEP/SDP binding status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6527 | timetra | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3 | timetraProducts | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3.1 | tmnxSRMIB | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3.1.2 | tmnxSRObjs | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.52 | tmnxDot1agMIBObjs | TIMETRA-IEEE8021-CFM-MIB |
| 1.3.6.1.4.1.6527.3.1.2.52.2 | tmnxDot1agCfmGlobalObjs | TIMETRA-IEEE8021-CFM-MIB |
| 1.3.6.1.4.1.6527.3.1.2.52.2.1 | tmnxDot1agCfmMcLagConfigGroup | TIMETRA-IEEE8021-CFM-MIB |
| 1.3.6.1.4.1.6527.3.1.2.52.2.1.1 | tmnxDot1agCfmMcLagStdbyInactive | TIMETRA-IEEE8021-CFM-MIB |