All MIBs › TIMETRA-IEEE8021-CFM-MIB › tmnxDot1agCfmMcLagPropHoldTime
tmnxDot1agCfmMcLagPropHoldTime
Module: TIMETRA-IEEE8021-CFM-MIB
OID (symbolic): TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmMcLagPropHoldTime
OID (numeric): 1.3.6.1.4.1.6527.3.1.2.52.2.1.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The value of tmnxDot1agCfmMcLagPropHoldTime specifies the duration, in seconds, of a timer that is activated when an MC-LAG port or protocol changes state. While the timer is active, no fault set or clear is propagated to the MC-LAG SAP's CFM MEP.
The outstanding hold time can be monitored by polling the value of sapEthCfmMcLagPropHoldTimeRemain for a particular SAP. When set to the value zero (0), no delay in response to a port or protocol change will be observed.
This object is meaningful only when tmnxDot1agCfmMcLagStdbyInactive is set to the value 'enabled (1)', otherwise an SNMP Set operation will result in an inconsistentValue error and the result of an SNMP Get operation will be undefined.
What is tmnxDot1agCfmMcLagPropHoldTime?
This value specifies, in seconds (0 to 60), a hold timer activated when an MC-LAG port or protocol changes state, during which no fault set or clear is propagated to that SAP's CFM MEP; a value of 0 means no delay; it's only meaningful when tmnxDot1agCfmMcLagStdbyInactive is enabled, otherwise a set fails with inconsistentValue. An admin tunes this to avoid CFM flapping alarms during a brief MC-LAG state transition, at the cost of slightly delaying legitimate fault propagation during that window. The outstanding hold time can be checked in real time via the related sapEthCfmMcLagPropHoldTimeRemain object for a given SAP.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.52.2.1.2 snmpwalk -v2c -c public <target> TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmMcLagPropHoldTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.52.2.1.2.1 snmpget -v2c -c public <target> TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmMcLagPropHoldTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6527.3.1.2.52.2.1.2.1 i <value>
Start monitoring Alcatel-Lucent (Nokia) SROS service routers and switches (802.1ag CFM MEP/SDP binding status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmMcLagPropHoldTime OID value, configure state conditions and alerts, and monitor any Alcatel-Lucent (Nokia) SROS service routers and switches (802.1ag CFM MEP/SDP binding status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6527 | timetra | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3 | timetraProducts | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3.1 | tmnxSRMIB | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3.1.2 | tmnxSRObjs | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.52 | tmnxDot1agMIBObjs | TIMETRA-IEEE8021-CFM-MIB |
| 1.3.6.1.4.1.6527.3.1.2.52.2 | tmnxDot1agCfmGlobalObjs | TIMETRA-IEEE8021-CFM-MIB |
| 1.3.6.1.4.1.6527.3.1.2.52.2.1 | tmnxDot1agCfmMcLagConfigGroup | TIMETRA-IEEE8021-CFM-MIB |
| 1.3.6.1.4.1.6527.3.1.2.52.2.1.2 | tmnxDot1agCfmMcLagPropHoldTime | TIMETRA-IEEE8021-CFM-MIB |