T11-FC-SP-POLICY-MIB :: t11FcSpPoWkpDescrFlags

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsT11-FC-SP-POLICY-MIBt11FcSpPoWkpDescrFlags

t11FcSpPoWkpDescrFlags

Module: T11-FC-SP-POLICY-MIB

OID (symbolic): T11-FC-SP-POLICY-MIB::t11FcSpPoWkpDescrFlags

OID (numeric): 1.3.6.1.2.1.178.1.1.8.1.3

Node type: OBJECT-TYPE

Type: Bits

Access: read-only

Description: The flag bits that specify how access is to be limited by this Well-Known Protocol Access Descriptor:

- allow -- IP management access using this protocol/port is allowed if this bit is set, and to be denied if this bit is not set.

- wkpWildcard -- if this bit is set, the IP Protocol number of the Well-Known Protocol to be allowed/denied is specified by the value of t11FcSpPoWkpDescrWkpNumber.

- destPortWildcard -- if this bit is set, the Destination (TCP/UDP) Port number of the Well-Known Protocol to be allowed/denied is specified by the value of t11FcSpPoWkpDescrDestPort.

- readOnly -- if this bit is set, then access is to be granted only for reading.

What is t11FcSpPoWkpDescrFlags?

Reports the flag bits of an active Well-Known Protocol Access Descriptor: whether the described protocol/port access is allowed or denied, whether it's matched by protocol number or destination port wildcard, and whether access is read-only.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.178.1.1.8.1.3
snmpwalk -v2c -c public <target> T11-FC-SP-POLICY-MIB::t11FcSpPoWkpDescrFlags

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.178.1.1.8.1.3.1
snmpget -v2c -c public <target> T11-FC-SP-POLICY-MIB::t11FcSpPoWkpDescrFlags.1

Start monitoring vendor-neutral, standards-based MIB (INCITS T11 FC-SP), Fibre Channel switches/directors (fabric security-policy activation status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the T11-FC-SP-POLICY-MIB::t11FcSpPoWkpDescrFlags OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB (INCITS T11 FC-SP), Fibre Channel switches/directors (fabric security-policy activation status) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.178t11FcSpPolicyMIBT11-FC-SP-POLICY-MIB
1.3.6.1.2.1.178.1t11FcSpPoMIBObjectsT11-FC-SP-POLICY-MIB
1.3.6.1.2.1.178.1.1t11FcSpPoActiveT11-FC-SP-POLICY-MIB
1.3.6.1.2.1.178.1.1.8t11FcSpPoWkpDescrTableT11-FC-SP-POLICY-MIB
1.3.6.1.2.1.178.1.1.8.1t11FcSpPoWkpDescrEntryT11-FC-SP-POLICY-MIB
1.3.6.1.2.1.178.1.1.8.1.3t11FcSpPoWkpDescrFlagsT11-FC-SP-POLICY-MIB