All MIBs › T11-FC-SP-POLICY-MIB › t11FcSpPoAdminFabricName
t11FcSpPoAdminFabricName
Module: T11-FC-SP-POLICY-MIB
OID (symbolic): T11-FC-SP-POLICY-MIB::t11FcSpPoAdminFabricName
OID (numeric): 1.3.6.1.2.1.178.1.1.1.1.3
Node type: OBJECT-TYPE
Type: FcNameIdOrZero
Access: read-only
Description: The administratively-specified name for this Fabric, as specified in the active Switch Membership List Object. This value is meaningful only when Static Domain_IDs are in use in a Fabric (see FC-SW-4). Static Domain_IDs are administratively enabled by a setting of the Switch Flags
in each Switch Entry in the Switch Membership List Object. If Static Domain_IDs are not in use, this value might be '0000000000000000'h.
The t11FamEnable, t11FamFabricName, and t11FamConfigDomainIdType objects defined in the T11-FC-FABRIC-ADDR-MGR-MIB module are also concerned with the use of an administratively-specified name for a Fabric and Static Domain_IDs. When FC-SP Policy is in use in a Fabric, the values of t11FamEnable, t11FamFabricName, and t11FamConfigDomainIdType must be read-only and reflect the active Policy Objects. For example, the value of t11FamFabricName must reflect the value of t11FcSpPoAdminFabricName.
What is t11FcSpPoAdminFabricName?
Reports the administratively-configured Fabric Name from the active Switch Membership List, meaningful only when the Fabric uses Static Domain_IDs; it reads as all-zeros when Static Domain_IDs aren't in use.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.178.1.1.1.1.3 snmpwalk -v2c -c public <target> T11-FC-SP-POLICY-MIB::t11FcSpPoAdminFabricName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.178.1.1.1.1.3.1 snmpget -v2c -c public <target> T11-FC-SP-POLICY-MIB::t11FcSpPoAdminFabricName.1
Start monitoring vendor-neutral, standards-based MIB (INCITS T11 FC-SP), Fibre Channel switches/directors (fabric security-policy activation status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the T11-FC-SP-POLICY-MIB::t11FcSpPoAdminFabricName OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB (INCITS T11 FC-SP), Fibre Channel switches/directors (fabric security-policy activation status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.178 | t11FcSpPolicyMIB | T11-FC-SP-POLICY-MIB |
| 1.3.6.1.2.1.178.1 | t11FcSpPoMIBObjects | T11-FC-SP-POLICY-MIB |
| 1.3.6.1.2.1.178.1.1 | t11FcSpPoActive | T11-FC-SP-POLICY-MIB |
| 1.3.6.1.2.1.178.1.1.1 | t11FcSpPoTable | T11-FC-SP-POLICY-MIB |
| 1.3.6.1.2.1.178.1.1.1.1 | t11FcSpPoEntry | T11-FC-SP-POLICY-MIB |
| 1.3.6.1.2.1.178.1.1.1.1.3 | t11FcSpPoAdminFabricName | T11-FC-SP-POLICY-MIB |