All MIBs › T11-FC-SP-AUTHENTICATION-MIB › t11FcSpAuRejectMaxRows
t11FcSpAuRejectMaxRows
Module: T11-FC-SP-AUTHENTICATION-MIB
OID (symbolic): T11-FC-SP-AUTHENTICATION-MIB::t11FcSpAuRejectMaxRows
OID (numeric): 1.3.6.1.2.1.176.1.1.1.9
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The maximum number of rows in the t11FcSpAuRejectTable for this entity on this Fabric. If and when an AUTH message is rejected, and the t11FcSpAuRejectTable already contains this maximum number of rows for the specific entity and Fabric, the row containing the oldest information is discarded and replaced by a row containing information about the new rejection.
There will be less than this maximum number of rows in the t11FcSpAuRejectTable in exceptional circumstances, e.g., after an agent restart.
In an implementation that does not support the t11FcSpAuRejectTable, this object will always be zero.
What is t11FcSpAuRejectMaxRows?
The maximum number of rows (0-1000) this entity keeps in t11FcSpAuRejectTable per Fabric; once full, the oldest rejected-transaction row is dropped to make room for a new one, and a value of 0 means the reject table isn't supported at all.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.176.1.1.1.9 snmpwalk -v2c -c public <target> T11-FC-SP-AUTHENTICATION-MIB::t11FcSpAuRejectMaxRows
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.176.1.1.1.9.1 snmpget -v2c -c public <target> T11-FC-SP-AUTHENTICATION-MIB::t11FcSpAuRejectMaxRows.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.176.1.1.1.9.1 i <value>
Start monitoring Fibre Channel SAN switches, FC-SP authentication (authentication protocol/cryptographic config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the T11-FC-SP-AUTHENTICATION-MIB::t11FcSpAuRejectMaxRows OID value, configure state conditions and alerts, and monitor any Fibre Channel SAN switches, FC-SP authentication (authentication protocol/cryptographic config status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.176 | t11FcSpAuthenticationMIB | T11-FC-SP-AUTHENTICATION-MIB |
| 1.3.6.1.2.1.176.1 | t11FcSpAuMIBObjects | T11-FC-SP-AUTHENTICATION-MIB |
| 1.3.6.1.2.1.176.1.1 | t11FcSpAuEntityTable | T11-FC-SP-AUTHENTICATION-MIB |
| 1.3.6.1.2.1.176.1.1.1 | t11FcSpAuEntityEntry | T11-FC-SP-AUTHENTICATION-MIB |
| 1.3.6.1.2.1.176.1.1.1.9 | t11FcSpAuRejectMaxRows | T11-FC-SP-AUTHENTICATION-MIB |