All MIBs › T11-FC-SP-AUTHENTICATION-MIB › t11FcSpAuDefaultLifetime
t11FcSpAuDefaultLifetime
Module: T11-FC-SP-AUTHENTICATION-MIB
OID (symbolic): T11-FC-SP-AUTHENTICATION-MIB::t11FcSpAuDefaultLifetime
OID (numeric): 1.3.6.1.2.1.176.1.1.1.7
Node type: OBJECT-TYPE
Type: T11FcSpLifetimeLeft
Access: read-write
Description: When the value of this object is non-zero, it specifies the default value of a lifetime, specified in units given by the corresponding instance of t11FcSpAuDefaultLifetimeUnits. This default lifetime is to be used for any Security Association that has no explicitly specified value for its lifetime.
An SA's lifetime is either the time interval or the number of passed bytes, after which the SA has to be terminated and (if necessary) replaced with a new SA.
If this object is zero, then there is no default value for lifetime.
What is t11FcSpAuDefaultLifetime?
The default lifetime (in units set by t11FcSpAuDefaultLifetimeUnits, default 28800 = 8 hours) applied to any Security Association that doesn't specify its own lifetime; a value of zero means there is no default and such SAs never expire on a timer.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.176.1.1.1.7 snmpwalk -v2c -c public <target> T11-FC-SP-AUTHENTICATION-MIB::t11FcSpAuDefaultLifetime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.176.1.1.1.7.1 snmpget -v2c -c public <target> T11-FC-SP-AUTHENTICATION-MIB::t11FcSpAuDefaultLifetime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.176.1.1.1.7.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> t11FcSpAuDefaultLifetime.1
Start monitoring Fibre Channel SAN switches, FC-SP authentication (authentication protocol/cryptographic config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the T11-FC-SP-AUTHENTICATION-MIB::t11FcSpAuDefaultLifetime OID value, configure state conditions and alerts, and monitor any Fibre Channel SAN switches, FC-SP authentication (authentication protocol/cryptographic config status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.176 | t11FcSpAuthenticationMIB | T11-FC-SP-AUTHENTICATION-MIB |
| 1.3.6.1.2.1.176.1 | t11FcSpAuMIBObjects | T11-FC-SP-AUTHENTICATION-MIB |
| 1.3.6.1.2.1.176.1.1 | t11FcSpAuEntityTable | T11-FC-SP-AUTHENTICATION-MIB |
| 1.3.6.1.2.1.176.1.1.1 | t11FcSpAuEntityEntry | T11-FC-SP-AUTHENTICATION-MIB |
| 1.3.6.1.2.1.176.1.1.1.7 | t11FcSpAuDefaultLifetime | T11-FC-SP-AUTHENTICATION-MIB |