| OID symbolic | OID numeric | Type | Access | Description |
|---|
| dms | 1.3.6.1.4.1.1931 | | | |
| dmsMib | 1.3.6.1.4.1.1931.1 | | | |
| isPerf | 1.3.6.1.4.1.1931.1.1 | | | |
| INT isNumber | 1.3.6.1.4.1.1931.1.1.1 | INTEGER | read-only | The number of network servers currently
monitored by this agent. |
| INT isNextIndex | 1.3.6.1.4.1.1931.1.1.2 | INTEGER | read-only | The next available row index that can be used for
the creation of a new ServiceWatch request. If there
are no available rows, 0 is returned. |
| isTable | 1.3.6.1.4.1.1931.1.1.3 | | not-accessible | The list of network servers and their
status. The number of entries is given
by the value of isNumber. |
| isEntry | 1.3.6.1.4.1.1931.1.1.3.1 | | not-accessible | An entry for a network server containing
objects describing the health and performance
of the network server. |
| INT isIndex | 1.3.6.1.4.1.1931.1.1.3.1.1 | INTEGER | read-only | A unique value for each URL entry. Its
value ranges between 1 and isNumber. Row/
index numbers start at row 1.
around to 0, etc. |
| STR isRequestName | 1.3.6.1.4.1.1931.1.1.3.1.2 | DisplayString | read-write | The name of the ServiceWatch request. |
| REQ isStatus | 1.3.6.1.4.1.1931.1.1.3.1.3 | RequestStatus | read-write | See 'RequestStatus' definition for possible
values, except the value of isStatus will
never be notReady(3): if this row exists, it
will ALWAYS be ready. The notReady(3) value
typically means the row exists, but was missing
information. In this case, ServiceWatch
automatically fill in defaults for any values
that were missing, so notReady(3) will NEVER
set here. |
| STR isURL | 1.3.6.1.4.1.1931.1.1.3.1.4 | DisplayString | read-write | The URL monitored. You can add new URLs
to be monitored by setting a URL in isURL. |
| STR isUsername | 1.3.6.1.4.1.1931.1.1.3.1.5 | DisplayString | read-write | The username to use for access to the network service.
Currently used for web and ftp services only. |
| STR isPassword | 1.3.6.1.4.1.1931.1.1.3.1.6 | DisplayString | read-write | A password to use for access to the network service.
Currently used for web and ftp services only. |
| STR isProxy | 1.3.6.1.4.1.1931.1.1.3.1.7 | DisplayString | read-write | The hostname of a web proxy server, if any.
If an isProxy server is set to a web
proxy server name, the request will be sent
to the proxy server, instead of directly
to the hostname specified in the URL. |
| INT isServiceStatus | 1.3.6.1.4.1.1931.1.1.3.1.8 | INTEGER | read-only | The current operational state of the server. |
| STR isDescription | 1.3.6.1.4.1.1931.1.1.3.1.9 | DisplayString | read-only | A textual description of the server software. |
| STR isResponseTime | 1.3.6.1.4.1.1931.1.1.3.1.10 | DisplayString | read-only | The response time, in seconds, for the server
to complete the request. Note: A string containing a
floating point number: real floating point values
do not exist in the SNMP protocol, so a floating
point string is used. For the response time as
an integer, refer to 'isResponseTimeInteger.' |
| INT isResponseTimeInteger | 1.3.6.1.4.1.1931.1.1.3.1.11 | INTEGER | read-only | The response time, in seconds, for the server
to complete the request. (An integer.) |
| INT isTimeExceeded | 1.3.6.1.4.1.1931.1.1.3.1.12 | INTEGER | read-only | The time for the server to complete the request
exceeded maximum amount of time allowed. (See
the isMaxWait variable which is related to this
variable.) The request to the server was consequently
aborted It will be set to unknown(3) if the
request is not active. |
| INT isMaxWait | 1.3.6.1.4.1.1931.1.1.3.1.13 | INTEGER | read-write | The maximum amount of time to wait before timing out
during an attempt to perform a query on the server. |
| STR isLevel | 1.3.6.1.4.1.1931.1.1.3.1.14 | DisplayString | read-write | The error level to set when an event occurs for
this URL. The type of error level can be determined
by the user: For example 1-10, or 'low', 'medium', 'high',
etc. |
| INT isError | 1.3.6.1.4.1.1931.1.1.3.1.15 | INTEGER | read-only | The type of error that occurred (if any). |
| INT isBytesRead | 1.3.6.1.4.1.1931.1.1.3.1.16 | INTEGER | read-only | The number of data bytes read from the server
on the last request. |
| INT isThroughPut | 1.3.6.1.4.1.1931.1.1.3.1.17 | INTEGER | read-only | The rate of bytes per second read from the server
on the last request. |
| INT isPortNumber | 1.3.6.1.4.1.1931.1.1.3.1.18 | INTEGER | read-only | The TCP/IP or UDP/IP port number used to
contact the network server. You specify the port
number to use in isURL. |
| INT isPortType | 1.3.6.1.4.1.1931.1.1.3.1.19 | INTEGER | read-write | For DNS, isPortType can be either TCP or UDP. For
other protocols, it can be only TCP, since the
other protocols speak only TCP. |
| INT isOptions | 1.3.6.1.4.1.1931.1.1.3.1.20 | INTEGER | read-write | Options (bitstring) on how the server will
be contacted. You can add these together
to set more than one option:
none(1):
By defaut, a sample query to the server
will be performed.
noQuery(2):
Do not attempt to do a query to the
network server (it will only check
the port to determine if there
IS a server there.
reResolve(4):
Reresolve the hostname into an
IP address immediately before
EACH attempted contacted with the
network server.
proxyNocache(8):
When using a proxy server, inform
the proxy server to not use its
cache.
logAll(32):
Log information from all poll requests
to the log file. (Otherwise, only
exceptions/traps will be logged.)
notifyStateChange(64):
Notify ONLY on a state change of
a network service. For example,
notify only if 1) A service has been
down exactly NCFailsAlert times, OR:
2) A service has been down and then
comes back up. Note: If
NotifyStateChange is set, then only 1
notification will occur until/unless
the network server comes up again.
The KIND of notification done (trap
and/or log to a file and/or run a
program) is determined by the
isEventType variable.
allEprog(128):
Run the program specified in isEprog after EACH
poll attempt to the service (rather than only
when there is an event, etc.).
traceRoute(256):
If an event occurs and email is sent (isEmail
is set), then include a traceroute to the
host that had the failed network service.
disableAutoStart(512):
Do not start this request during 'Start
All Requests' or system reboots.
sslWorkarounds(1024):
Enable SSL bug workarounds. |
| INT isNRequests | 1.3.6.1.4.1.1931.1.1.3.1.21 | INTEGER | read-write | The number of times to perform the request. |
| INT isInterval | 1.3.6.1.4.1.1931.1.1.3.1.22 | INTEGER | read-write | The number of seconds to wait, after the
completion of the last request, before
starting the next request. |
| INT isRequestNumber | 1.3.6.1.4.1.1931.1.1.3.1.23 | INTEGER | read-only | The request number (relates to isNRequests and
isInterval. |
| INT isEventType | 1.3.6.1.4.1.1931.1.1.3.1.24 | INTEGER | read-write | The type of notification that will be
performed. Add all of the options you wish to
use and set isEventType to the total of these
options. For example, if you want logging to a
file (2) and an snmp-trap to be sent (4), then
set isEventType to 6 (2 + 4). The default is
snmp-trap(4). The possible choices are:
none(1):
No logging is performed. If this
bit is set, all other bits are
then cleared in this variable.
log(2):
Logging to a file is performed.
snmp-trap(4):
Sending an SNMP trap is performed. |
| STR isEprog | 1.3.6.1.4.1.1931.1.1.3.1.25 | DisplayString | read-write | The filename of the program to run when
an event occurs (or after every poll attempt if
isOptions has allEprog set). |
| STR isEmail | 1.3.6.1.4.1.1931.1.1.3.1.26 | DisplayString | read-write | The email address to send email when
an event occurs. If this variable is
not null, then email will be sent to
this email address when an event
occurs. |
| INT isNCFails | 1.3.6.1.4.1.1931.1.1.3.1.28 | INTEGER | read-only | The number of CONSECUTIVE failures when
attempting to complete the request to a
network server. |
| INT isNCFailsAlert | 1.3.6.1.4.1.1931.1.1.3.1.29 | INTEGER | read-write | Report a failure when isNCFailsAlert consecutive
failures have occurred. Failures are reported
as defined by the isEventType variable.
The default for isNCFailsAlert is 1: After
1 failure, report it. |
| INT isResponseType | 1.3.6.1.4.1.1931.1.1.3.1.30 | INTEGER | read-only | The response type as returned from the server.
For example 200-299 means the request succeeded,
400-499 are bad requests, etc. |
| STR isResponseReason | 1.3.6.1.4.1.1931.1.1.3.1.31 | DisplayString | read-only | A textual description of the server's
response type, as returned from the server.
(This response should contain the string
describing the responseType byte.) |
| STR isLastAttempt | 1.3.6.1.4.1.1931.1.1.3.1.32 | DisplayString | read-only | The last time that this agent attempted to contact
the network server. The format returned:
Thu Oct 3 13:18:50 1996 |
| STR isFirstFailed | 1.3.6.1.4.1.1931.1.1.3.1.33 | DisplayString | read-only | The first time the network service failed this round
of failures. The format returned:
Tue Jan 4 23:08:21 2000 |
| STR isFileType | 1.3.6.1.4.1.1931.1.1.3.1.34 | DisplayString | read-only | The retrieved file's type, such as text/html,
image/gif etc. (Applies to web servers only,
currently). |
| IP isIPAddr | 1.3.6.1.4.1.1931.1.1.3.1.35 | IpAddress | read-only | The IP address to which this entry's monitoring
information pertains. |
| STR isData | 1.3.6.1.4.1.1931.1.1.3.1.36 | DisplayString | read-only | Additional information or data returned from the sample request. |
| isTraps | 1.3.6.1.4.1.1931.1.2 | | | |
| NTF serverFailed | 1.3.6.1.4.1.1931.1.2.0.1 | | | The network server failed to correctly reply to the request in the time allowed. |
| NTF serverUp | 1.3.6.1.4.1.1931.1.2.0.2 | | | If notifyStateChange is set in isOptions and the state of the network service changed from down to up, then a 'serverUp' trap is sent. |
| dmsTraps | 1.3.6.1.4.1.1931.1.3 | | | |
| NTF dmsStart | 1.3.6.1.4.1.1931.1.3.0.1 | | | This trap is sent when the ServiceWatch agent starts |
| NTF dmsShutdown | 1.3.6.1.4.1.1931.1.3.0.2 | | | This trap is sent when the ServiceWatch agent terminates |
| swatchSnmpAgent | 1.3.6.1.4.1.1931.250 | | | |
| hpux9 | 1.3.6.1.4.1.1931.250.1 | | | |
| sunos4 | 1.3.6.1.4.1.1931.250.2 | | | |
| solaris | 1.3.6.1.4.1.1931.250.3 | | | |
| osf | 1.3.6.1.4.1.1931.250.4 | | | |
| ultrix | 1.3.6.1.4.1.1931.250.5 | | | |
| hpux10 | 1.3.6.1.4.1.1931.250.6 | | | |
| netbsd1 | 1.3.6.1.4.1.1931.250.7 | | | |
| freebsd | 1.3.6.1.4.1.1931.250.8 | | | |
| irix | 1.3.6.1.4.1.1931.250.9 | | | |
| linux | 1.3.6.1.4.1.1931.250.10 | | | |
| bsdi | 1.3.6.1.4.1.1931.250.11 | | | |
| openbsd | 1.3.6.1.4.1.1931.250.12 | | | |
| win32 | 1.3.6.1.4.1.1931.250.13 | | | |
| unknown | 1.3.6.1.4.1.1931.250.255 | | | |
