All MIBs › SWDES3528-52PRIMGMT-MIB
Category: Switch Management - D-Link
Description:
Manages primary configuration and operational objects for D-Link DES-3528 and DES-3552 switches.
Imported Objects
From DLINK-ID-REC-MIB
| dlink-mgmt | |
| dlink-products |
From SNMPv2-SMI
| MODULE-IDENTITY |
What Is SWDES3528-52PRIMGMT-MIB?
SWDES3528-52PRIMGMT-MIB is a vendor MIB module for D-Link's DES-3528 and DES-3552 series Fast Ethernet switches, part of D-Link's enterprise networking product line. It exposes the primary management configuration and operational parameters that govern how the switch is administered, spanning device-level settings and status flags rather than a single subsystem. In practice it is used to monitor and confirm the switch's basic operational health and management-plane status, such as whether primary management configuration has been correctly applied and is active. Administrators typically open the SWDES3528-52PRIMGMT-MIB MIB Browser view to confirm which management settings are currently active on the switch. Because it is a D-Link private-enterprise MIB it typically depends on standard SNMPv2-SMI conventions and is often paired with the more general IF-MIB and BRIDGE-MIB for port and switching data. It is deployed in small-to-medium enterprise wiring closets where DES-3528/3552 switches provide access-layer connectivity.
IPNetwork Monitor allows you to monitor SNMP objects defined in SWDES3528-52PRIMGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- primary management configuration status
- device management mode
- administrative settings state
Supported Devices
- D-Link DES-3528 switch
- D-Link DES-3552 switch
Monitoring Examples
No source objects were available for this module in the extracted data, so specific object or table names cannot be cited from sample_objects. In general, a MIB of this type would be polled to confirm the switch's primary management configuration (e.g., in-band vs. out-of-band management settings) is active and consistent across a stack. An admin would typically pair this MIB with IF-MIB interface counters to correlate management-plane issues with port-level connectivity problems on the DES-3528/3552.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| dlink_Des3500SeriesProd | 1.3.6.1.4.1.171.10.105 | |||
| des3528Prod | 1.3.6.1.4.1.171.10.105.1 | |||
| des3528pProd | 1.3.6.1.4.1.171.10.105.2 | |||
| des3552Prod | 1.3.6.1.4.1.171.10.105.3 | |||
| des3552pProd | 1.3.6.1.4.1.171.10.105.4 | |||
| des3528dcProd | 1.3.6.1.4.1.171.10.105.5 | |||
| dlink_Des3500Series | 1.3.6.1.4.1.171.11.105 | |||
| des3528 | 1.3.6.1.4.1.171.11.105.1 | |||
| des3528p | 1.3.6.1.4.1.171.11.105.2 | |||
| des3552 | 1.3.6.1.4.1.171.11.105.3 | |||
| des3552p | 1.3.6.1.4.1.171.11.105.4 | |||
| des3528dc | 1.3.6.1.4.1.171.11.105.5 |
RFC description
D-Link DES3528-52 switch primary management MIB for SNMP-based device monitoring.
Start monitoring D-Link DES-3528/DES-3552 switch, discontinued (primary management config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.