All MIBs › SW36XXPRIMGMT-MIB
Category: Switch Management - D-Link
Description:
Manages primary configuration and status objects specific to the D-Link DES-36XX switch series.
Imported Objects
From DLINK-ID-REC-MIB
| dlink-mgmt | |
| dlink-products |
From SNMPv2-SMI
| MODULE-IDENTITY |
What Is SW36XXPRIMGMT-MIB?
SW36XXPRIMGMT-MIB is a vendor MIB for D-Link's DES-36XX series Ethernet switches, providing primary/core configuration and status management objects specific to that switch family. With no sample objects captured for this module, its likely scope, based on the name 'primary management,' covers baseline switch configuration and operational status such as system settings, port/VLAN basics, and device identification for the DES-36XX line. Primary-management MIBs of this kind generally expose hardware/software status such as system uptime, firmware/software version, and basic operational health of the switch chassis. Dependency information is not evident from the available description, though D-Link switch MIBs typically layer on top of standard IF-MIB/BRIDGE-MIB objects. Deployment context is D-Link DES-36XX series managed Ethernet switches in SMB/enterprise LAN environments. In practice, SW36XXPRIMGMT-MIB SNMP monitoring would cover baseline system uptime, firmware version, and port/VLAN status once the specific objects are confirmed against vendor documentation.
IPNetwork Monitor allows you to monitor SNMP objects defined in SW36XXPRIMGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- D-Link DES-36XX series Ethernet switch
Monitoring Examples
No sample objects were available for this module, so a concrete polling scenario can't be honestly detailed here; in general, a 'PrimGmt' MIB of this kind would expose core system/status objects that an admin could poll to confirm a DES-36XX switch's basic operational state and configuration.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| dlink_ProjectXStackIISeriesProd | 1.3.6.1.4.1.171.10.70 | |||
| dlink_Dgs3650 | 1.3.6.1.4.1.171.10.70.5 | |||
| dlink_Dgs3627 | 1.3.6.1.4.1.171.10.70.6 | |||
| dlink_Dgs3627g | 1.3.6.1.4.1.171.10.70.8 | |||
| dlink_Dgs3612g | 1.3.6.1.4.1.171.10.70.9 | |||
| dlink_Dgs3612 | 1.3.6.1.4.1.171.10.70.10 | |||
| dgsProjectXStackIISeriesProd | 1.3.6.1.4.1.171.11.70 | |||
| dgs3650 | 1.3.6.1.4.1.171.11.70.5 | |||
| dgs3627 | 1.3.6.1.4.1.171.11.70.6 | |||
| dgs3627g | 1.3.6.1.4.1.171.11.70.8 | |||
| dgs3612g | 1.3.6.1.4.1.171.11.70.9 | |||
| dgs3612 | 1.3.6.1.4.1.171.11.70.10 |
RFC description
Vendor-specific MIB for management of Foundry/Brocade SW 36xx series switches.
Start monitoring D-Link DES-36XX series Ethernet switch, legacy (primary management config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.