SW-PBRD-MIB

All MIBs › SW-PBRD-MIB

Description: SW-PBRD-MIB module

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SW-PBRD-MIB?

No module description or sample objects were supplied for SW-PBRD-MIB, and it has no existing short description, so its vendor and exact content cannot be confirmed from the available data. The name suggests a MIB for a policy-based routing daemon ('pbrd'), a control-plane software component that applies routing decisions based on criteria beyond destination address (e.g. source address, protocol, or incoming interface). If that inference holds, it would belong to the routing/policy-control technology area and would expose PBR rule/route-map configuration and applied-policy state rather than physical hardware sensors. Any role in hardware/software status monitoring would be limited to confirming whether configured PBR policies are active, but this cannot be verified without module content. It would presumably depend on the host router/switch's base interface and routing-table MIBs, and would be deployed on a router or Layer 3 switch supporting policy-based routing. Engineers can download the SW-PBRD-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SW-PBRD-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

D-Link ES2000 'Golf' series managed switch (Marconi enterprise OID branding)

Monitoring Examples

No module description or sample objects were provided, so no concrete object names or monitoring scenario can be honestly described for this MIB; any specifics would be invented rather than grounded in the supplied data.

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
enterprises

From RFC1493-MIB

MacAddress
dot1dBasePort	OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
marconi	1.3.6.1.4.1.326
systems	1.3.6.1.4.1.326.2
external	1.3.6.1.4.1.326.2.20
dlink	1.3.6.1.4.1.326.2.20.1
dlinkcommon	1.3.6.1.4.1.326.2.20.1.1
golf	1.3.6.1.4.1.326.2.20.1.2
golfproducts	1.3.6.1.4.1.326.2.20.1.2.1
es2000	1.3.6.1.4.1.326.2.20.1.2.1.3
golfcommon	1.3.6.1.4.1.326.2.20.1.2.2
marconi_mgmt	1.3.6.1.4.1.326.2.20.1.2.2.2
es2000Mgmt	1.3.6.1.4.1.326.2.20.1.2.2.2.28
swL2Mgmt	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2
swVlan	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8
pBridgeMIBObjects	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.4
dot1dExtBase	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.4.1
INT dot1dDeviceCapabilities	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.4.1.1	INTEGER	read-only	Indicates the optional parts of IEEE 802.1D and 802.1Q that are implemented by this device and are managable through this MIB. Capabilities that are allowed on a per-port basis are indicated in dot1dPortCapabilities.
T/F dot1dTrafficClassesEnabled	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.4.1.2	TruthValue	read-only	The value true(1) indicates that Traffic Classes are enabled on this bridge. When false(2), the bridge operates with a single priority level for all traffic.
ENA dot1dGmrpStatus	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.4.1.3	EnabledStatus	read-write	The administrative status requested by management for GMRP. The value enabled(1) indicates that GMRP should be enabled on this device, in all VLANs, on all ports for which it has not been specifically disabled. When disabled(2), GMRP is disabled, in all VLANs, on all ports and all GMRP packets will be forwarded transparently. This object affects both Applicant and Registrar state machines. A transition from disabled(2) to enabled(1) will cause a reset of all GMRP state machines on all ports.
dot1dPortCapabilitiesTable	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.4.1.4		not-accessible	A table that contains capabilities information about every port that is associated with this bridge.
dot1dPortCapabilitiesEntry	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.4.1.4.1		not-accessible	A set of capabilities information about this port indexed by dot1dBasePort.
INT dot1dPortCapabilities	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.4.1.4.1.1	INTEGER	read-only	Indicates the parts of IEEE 802.1D and 802.1Q that are optional on a per-port basis that are implemented by this device and are managable through this MIB.
dot1dPriority	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.4.2
dot1dPortPriorityTable	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.4.2.1		not-accessible	A table that contains information about every port that is associated with this transparent bridge.
dot1dPortPriorityEntry	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.4.2.1.1		not-accessible	A list of the number of egress traffic classes supported for each port in a transparent bridge. This is indexed by dot1dBasePort.
INT dot1dPortNumTrafficClasses	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.4.2.1.1.1	INTEGER	read-only	The number of egress traffic classes supported on this port. This object may optionally be read-only.
dot1dGarp	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.4.3
dot1dPortGarpTable	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.4.3.1		not-accessible	A table of GARP control information about every bridge port. This is indexed by dot1dBasePort.
dot1dPortGarpEntry	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.4.3.1.1		not-accessible	GARP control information for a bridge port.
NUM dot1dPortGarpJoinTime	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.4.3.1.1.1	TimeInterval	read-write	The GARP Join time, in centiseconds.
NUM dot1dPortGarpLeaveTime	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.4.3.1.1.2	TimeInterval	read-write	The GARP Leave time, in centiseconds.
NUM dot1dPortGarpLeaveAllTime	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.4.3.1.1.3	TimeInterval	read-write	The GARP LeaveAll time, in centiseconds.
dot1dGmrp	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.4.4
dot1dPortGmrpTable	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.4.4.1		not-accessible	A table of GMRP control and status information about every bridge port. Augments the dot1dBasePortTable.
dot1dPortGmrpEntry	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.4.4.1.1		not-accessible	GMRP control and status information for a bridge port.
ENA dot1dPortGmrpStatus	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.4.4.1.1.1	EnabledStatus	read-write	The state of GMRP operation on this port. The value enabled(1) indicates that GMRP is enabled on this port, in all VLANs, as long as dot1dGmrpStatus is also enabled for this device. When disabled(2) but dot1dGmrpStatus is still enabled for the device, GMRP is disabled on this port in all VLANs: any GMRP packets received will be silently discarded and no GMRP registrations will be propagated from other ports. This object affects all GMRP Applicant and Registrar state machines on this port. A transition from disabled(2) to enabled(1) will cause a reset of all GMRP state machines on this port.
CTR dot1dPortGmrpFailedRegistrations	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.4.4.1.1.2	Counter	read-only	The total number of failed GMRP registrations, for any reason, in all VLANs, on this port.
MAC dot1dPortGmrpLastPduOrigin	1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.4.4.1.1.3	MacAddress	read-only	The Source MAC Address of the last GMRP message received on this port.

RFC description

SNMP MIB for monitoring policy-based routing and filtering decisions, enabling management of advanced traffic engineering policies.

Start monitoring D-Link ES2000 'Golf' series switch (Marconi-branded OEM, IEEE 802.1p traffic-class config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SW-PBRD-MIB

What Is SW-PBRD-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description