SURVEILLANCE-VLAN-MIB

All MIBs › SURVEILLANCE-VLAN-MIB

Organization: D-Link Corp.

Last Updated: 2011-09-19

Category: Switch Management - D-Link

Description: Manages D-Link Surveillance VLAN assignment for IP camera traffic prioritization and separation.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SURVEILLANCE-VLAN-MIB?

SURVEILLANCE-VLAN-MIB is a proprietary D-Link module for assigning and managing a dedicated VLAN for IP surveillance camera traffic on a switch, isolating and prioritizing that traffic from general network traffic. No sample objects were provided, so specifics beyond the short description cannot be confirmed. Its monitoring scope is configuration-oriented rather than hardware-sensor based: which switch ports/devices are assigned to the surveillance VLAN and whether that separation is correctly applied, which affects camera traffic quality and network segmentation integrity. It builds on standard 802.1Q VLAN tagging concepts as a D-Link-specific management layer on top. It is deployed on D-Link managed switches used in IP video-surveillance network deployments, where SURVEILLANCE-VLAN-MIB SNMP monitoring confirms camera ports remain correctly isolated on the dedicated VLAN.

IPNetwork Monitor allows you to monitor SNMP objects defined in SURVEILLANCE-VLAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

D-Link managed switch
IP surveillance camera network

Monitoring Examples

No sample objects were provided for this module, so a concrete object-level scenario cannot be grounded in confirmed names. In general, an admin would check which switch ports are assigned to the surveillance VLAN to confirm camera ports are correctly isolated from general traffic, since a camera accidentally left off the surveillance VLAN could suffer degraded video quality from contending general-purpose traffic.

What Can Be Monitored

surveillance VLAN ID assignment
camera port VLAN membership

Imported Objects

From DLINK-ID-REC-MIB

dlink-common-mgmt

From Q-BRIDGE-MIB

PortList
VlanIdOrNone

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
RowStatus
TimeInterval
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
swSurveillanceVLANMIB	1.3.6.1.4.1.171.12.102			The surveillance VLAN module MIB for the proprietary enterprise.
swSurveillanceVLANNotifications	1.3.6.1.4.1.171.12.102.0
swSurveillanceVLANMIBObjects	1.3.6.1.4.1.171.12.102.1
swSurveillanceVlanCtrl	1.3.6.1.4.1.171.12.102.1.1
VLA swSurveillanceVlanId	1.3.6.1.4.1.171.12.102.1.1.1	VlanIdOrNone	read-write	The VLAN ID of the surveillance VLAN. The surveillance VLAN is used to assign VLANs for untagged video packets. The value zero is for display only and not configurable, which means there is no surveillance VLAN on the switch.
INT swSurveillanceVlanGlobalState	1.3.6.1.4.1.171.12.102.1.1.2	INTEGER	read-write	This object indicates the global status of the surveillance VLAN. If we enable the surveillance VLAN, we should set the VID first.
INT swSurveillanceVlanPriority	1.3.6.1.4.1.171.12.102.1.1.3	INTEGER	read-write	The priority for the surveillance VLAN, which is used to distinguish the QoS of the surveillance traffic from data traffic.
INT swSurveillanceVlanAgingTime	1.3.6.1.4.1.171.12.102.1.1.4	INTEGER	read-write	The aging time for the surveillance VLAN, which is used to remove a port from a surveillance VLAN when the working mode is auto.
INT swSurveillanceVlanLogState	1.3.6.1.4.1.171.12.102.1.1.5	INTEGER	read-write	This object indicates the surveillance VLAN log state.
swSurveillanceVlanInfo	1.3.6.1.4.1.171.12.102.1.2
POR swSurveillanceVlanMemberPortlist	1.3.6.1.4.1.171.12.102.1.2.1	PortList	read-only	The surveillance VLAN's member ports.
POR swSurveillanceVlanDynamicPortlist	1.3.6.1.4.1.171.12.102.1.2.2	PortList	read-only	The surveillance VLAN's member ports that dynamically joined the surveillance VLAN from a learned surveillance device.
swSurveillanceVlanDeviceTable	1.3.6.1.4.1.171.12.102.1.2.3		not-accessible	The management information of a surveillance VLAN member ports device.
swSurveillanceVlanDeviceEntry	1.3.6.1.4.1.171.12.102.1.2.3.1		not-accessible	The information from the surveillance device connected to the switch.
INT swSurveillanceVlanDevPort	1.3.6.1.4.1.171.12.102.1.2.3.1.1	INTEGER	read-only	The surveillance device's connected port.
MAC swSurveillanceVlanDevAddr	1.3.6.1.4.1.171.12.102.1.2.3.1.2	MacAddress	read-only	The surveillance device's MAC address.
INT swSurveillanceVlanDevComponentType	1.3.6.1.4.1.171.12.102.1.2.3.1.3	INTEGER	read-create	The surveillance device's component type.
DAT swSurveillanceVlanDevStartTime	1.3.6.1.4.1.171.12.102.1.2.3.1.4	DateAndTime	read-only	The time the surveillance device first connected to the switch.
swSurveillanceVlanMgmt	1.3.6.1.4.1.171.12.102.1.3
swSurveillanceVlanOuiTable	1.3.6.1.4.1.171.12.102.1.3.1		not-accessible	The management information of the surveillance VLAN OUI.
swSurveillanceVlanOuiEntry	1.3.6.1.4.1.171.12.102.1.3.1.1		not-accessible	The management information of the OUI of a surveillance VLAN domain. An OUI contains information about the type of IP phone that can make use of the OUI to check the surveillance traffic.
MAC swSurveillanceVlanOuiAddr	1.3.6.1.4.1.171.12.102.1.3.1.1.1	MacAddress	read-only	The address of the OUI referring to this swSurveillanceVlanOuiEntry.
MAC swSurveillanceVlanOuiMask	1.3.6.1.4.1.171.12.102.1.3.1.1.2	MacAddress	read-create	The OUI mask indicates the valid bit of the OUI address.
INT swSurveillanceVlanOuiComponentType	1.3.6.1.4.1.171.12.102.1.3.1.1.3	INTEGER	read-create	The Component type of the OUI.
STR swSurveillanceVlanOuiDes	1.3.6.1.4.1.171.12.102.1.3.1.1.4	DisplayString	read-create	The description of the OUI.(0-32)
ROW swSurveillanceVlanOuiRowStatus	1.3.6.1.4.1.171.12.102.1.3.1.1.5	RowStatus	read-create	This object indicates the status of this entry.
swSurveillanceVlanPortTable	1.3.6.1.4.1.171.12.102.1.3.2		not-accessible	The management of the surveillance VLAN function on all bridge ports. Some ports are not member ports of a surveillance VLAN, but they may be added in auto mode. Therefore, this function enables both current surveillance VLAN member ports and non-VLAN member ports to be managed.
swSurveillanceVlanPortEntry	1.3.6.1.4.1.171.12.102.1.3.2.1		not-accessible	The management of the surveillance VLAN function on ports
INT swSurveillanceVlanPortNumber	1.3.6.1.4.1.171.12.102.1.3.2.1.1	INTEGER	read-only	Bridge ports can be configured with surveillance VLAN function.
INT swSurveillanceVlanPortState	1.3.6.1.4.1.171.12.102.1.3.2.1.2	INTEGER	read-write	The port state here indicates whether the port supports the surveillance VLAN function. We can enable/disable the surveillance VLAN function on the port.

RFC description

Configures surveillance VLANs for video traffic management on D-Link switches with priority and aging controls.

Start monitoring D-Link managed switch (IP surveillance-camera dedicated VLAN config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SURVEILLANCE-VLAN-MIB

What Is SURVEILLANCE-VLAN-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description