SUN-SEA-EXTENSIONS-MIB

All MIBs › SUN-SEA-EXTENSIONS-MIB

Organization: Sun Microsystems, Inc.

Last Updated: 2003-09-18

Category: Network Management Infrastructure, SNMP Agent and Subagent

Description: Manages Sun Solstice Enterprise Agent extension objects for platform-specific SNMP enhancements.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SUN-SEA-EXTENSIONS-MIB?

SUN-SEA-EXTENSIONS-MIB is a vendor-specific MIB from Sun Microsystems that defines Solstice Enterprise Agent (SEA) extensions to the standard MIB-II object set, adding Sun-platform-specific SNMP objects not covered by the base IETF MIB-II. As an extension module it supplements standard system/interface objects with Sun-specific enhancements, though the specific fields are not enumerated in available metadata. Historically, such extension MIBs were used to expose additional Solaris system status not otherwise visible via plain MIB-II, filling gaps in monitoring a Sun host's software/hardware status. It explicitly depends on and extends RFC 1213/MIB-II, layering Sun-specific objects on top of that standard framework. It would be deployed on Sun Solaris servers running the Solstice Enterprise Agent SNMP daemon. Engineers can download the SUN-SEA-EXTENSIONS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SUN-SEA-EXTENSIONS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Sun Microsystems server running Solaris with Solstice Enterprise Agent

Monitoring Examples

No sample objects were available for this MIB, so a concrete monitoring scenario citing real object names cannot be honestly constructed; based on its stated purpose as a MIB-II extension, an admin would typically poll it alongside standard MIB-II objects to obtain additional Sun-specific system detail not present in the base standard.

Imported Objects

From RFC1155-SMI

Counter
Gauge
IpAddress
NetworkAddress
TimeTicks
enterprises
mgmt

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString

From SUN-MIB

sunMIB

MODULE-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
sunSeaExtensionsMIB	1.3.6.1.4.1.42.3			The MIB that describes the sun-specific extensions to mib-2
sunSystem	1.3.6.1.4.1.42.3.1
STR agentDescr	1.3.6.1.4.1.42.3.1.1	DisplayString	read-only	The SNMP agent's description of itself.
OCT hostID	1.3.6.1.4.1.42.3.1.2	OCTET STRING	read-only	The unique Sun hardware identifier. The value returned is four byte binary string.
STR motd	1.3.6.1.4.1.42.3.1.3	DisplayString	read-only	The first line of /etc/motd.
CTR unixTime	1.3.6.1.4.1.42.3.1.4	Counter	read-only	The Unix system time. Measured in seconds since January 1, 1970 GMT.
sunInterfaces	1.3.6.1.4.1.42.3.2
sunAt	1.3.6.1.4.1.42.3.3
sunIp	1.3.6.1.4.1.42.3.4
sunIcmp	1.3.6.1.4.1.42.3.5
sunTcp	1.3.6.1.4.1.42.3.6
sunUdp	1.3.6.1.4.1.42.3.7
sunSnmp	1.3.6.1.4.1.42.3.11
sunProcesses	1.3.6.1.4.1.42.3.12
sunProcessTable	1.3.6.1.4.1.42.3.12.1		read-only
psEntry	1.3.6.1.4.1.42.3.12.1.1		read-only
INT psProcessID	1.3.6.1.4.1.42.3.12.1.1.1	INTEGER	read-only	The process identifier for this process.
INT psParentProcessID	1.3.6.1.4.1.42.3.12.1.1.2	INTEGER	read-only	The process identifier of this process's parent.
INT psProcessSize	1.3.6.1.4.1.42.3.12.1.1.3	INTEGER	read-only	The combined size of the data and stack segments (in kilobytes.)
INT psProcessCpuTime	1.3.6.1.4.1.42.3.12.1.1.4	INTEGER	read-only	The CPU time (including both user and system time) consumed so far.
STR psProcessState	1.3.6.1.4.1.42.3.12.1.1.5	DisplayString	read-only	The run-state of the process. R - Runnable T - Stopped P - In page wait D - Non-interruptable wait S - Sleeping (less than 20 seconds) I - Idle (more than 20 seconds) Z - Zombie
STR psProcessWaitChannel	1.3.6.1.4.1.42.3.12.1.1.6	DisplayString	read-only	Reason process is waiting.
STR psProcessTTY	1.3.6.1.4.1.42.3.12.1.1.7	DisplayString	read-only	Terminal, if any, controlling this process.
STR psProcessUserName	1.3.6.1.4.1.42.3.12.1.1.8	DisplayString	read-only	Name of the user associated with this process.
INT psProcessUserID	1.3.6.1.4.1.42.3.12.1.1.9	INTEGER	read-only	Numeric form of the name of the user associated with this process.
STR psProcessName	1.3.6.1.4.1.42.3.12.1.1.10	DisplayString	read-only	Command name used to invoke this process.
INT psProcessStatus	1.3.6.1.4.1.42.3.12.1.1.11	INTEGER	read-write	Setting this variable will cause a signal of the set value to be sent to the process.
sunHostPerf	1.3.6.1.4.1.42.3.13
CTR rsUserProcessTime	1.3.6.1.4.1.42.3.13.1	Counter	read-only	total number of timeticks used by user processes since the system was last booted.
CTR rsNiceModeTime	1.3.6.1.4.1.42.3.13.2	Counter	read-only	total number of timeticks used by nice mode since the system was last booted.
CTR rsSystemProcessTime	1.3.6.1.4.1.42.3.13.3	Counter	read-only	total number of timeticks used by system processes since the system was last booted.
CTR rsIdleModeTime	1.3.6.1.4.1.42.3.13.4	Counter	read-only	total number of timeticks used in idle mode since the system was last booted.
CTR rsDiskXfer1	1.3.6.1.4.1.42.3.13.5	Counter	read-only
CTR rsDiskXfer2	1.3.6.1.4.1.42.3.13.6	Counter	read-only
CTR rsDiskXfer3	1.3.6.1.4.1.42.3.13.7	Counter	read-only
CTR rsDiskXfer4	1.3.6.1.4.1.42.3.13.8	Counter	read-only
CTR rsVPagesIn	1.3.6.1.4.1.42.3.13.9	Counter	read-only	Number of pages read in from disk.
CTR rsVPagesOut	1.3.6.1.4.1.42.3.13.10	Counter	read-only	Number of pages written to disk.
CTR rsVSwapIn	1.3.6.1.4.1.42.3.13.11	Counter	read-only	Number of pages swapped in.
CTR rsVSwapOut	1.3.6.1.4.1.42.3.13.12	Counter	read-only	Number of pages swapped out.
CTR rsVIntr	1.3.6.1.4.1.42.3.13.13	Counter	read-only	Number of device interrupts.
CTR rsIfInPackets	1.3.6.1.4.1.42.3.13.14	Counter	read-only	Number of input packets.
CTR rsIfOutPackets	1.3.6.1.4.1.42.3.13.15	Counter	read-only	Number of output packets.
CTR rsIfInErrors	1.3.6.1.4.1.42.3.13.16	Counter	read-only	Number of input errors.
CTR rsIfOutErrors	1.3.6.1.4.1.42.3.13.17	Counter	read-only	Number of output errors.
CTR rsIfCollisions	1.3.6.1.4.1.42.3.13.18	Counter	read-only	Number of output collisions.

RFC description

Sun-specific extensions to mib-2 for the Systems Management Agent, describing system, network, and process management.

Start monitoring Sun Microsystems Solaris server running Solstice Enterprise Agent (SEA MIB-II extensions) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SUN-SEA-EXTENSIONS-MIB

What Is SUN-SEA-EXTENSIONS-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description