All MIBs › SONUS-DS1-MIB
Organization: Sonus Networks, Inc.
Last Updated: 2001-07-31
Category: Sonus Networks VoIP Softswitch
Description: Manages Sonus Networks softswitch DS1 TDM interface configuration, alarm status, and performance monitoring.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is SONUS-DS1-MIB?
SONUS-DS1-MIB is a vendor MIB from Sonus Networks for managing DS1 (T1) TDM trunk interfaces on its softswitch/media gateway platforms. It exposes an administrative table for DS1 interface configuration, including shelf/slot/port location indices, association with parent DS3 interfaces, row status, profile name, and a mapped standard interface index (ifIndex), plus per-interface administrative state. Its monitoring value is centered on hardware/interface status: administrators track sonusDsx1AdmnState to confirm a DS1 trunk interface is enabled and operational, and use the shelf/slot/port/DS3/DS1 indexing to pinpoint exactly which physical trunk card and port a fault or alarm relates to. It explicitly ties into the standard IF-MIB via sonusDsx1AdmnIfIndex, and works alongside Sonus's DS3 and CAS MIBs since DS1 interfaces are nested under DS3 interfaces and often carry CAS-signaled trunks. Typical deployment is in carrier voice networks where Sonus gateways terminate T1/DS1 TDM trunks for interconnection with the PSTN or enterprise PBXs. Network engineers evaluating or troubleshooting this functionality can download the SONUS-DS1-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in SONUS-DS1-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Sonus Networks softswitch/media gateway
Monitoring Examples
An operator would poll sonusDsx1AdmnTable (via sonusDsx1AdmnShelfIndex, sonusDsx1AdmnSlotIndex, sonusDsx1AdmnPortIndex, and sonusDsx1AdmnDs1Index) to confirm a specific DS1 interface's sonusDsx1AdmnState is active, and cross-reference sonusDsx1AdmnIfIndex against standard interface counters for utilization or error stats. A DS1 interface unexpectedly reporting a down or disabled sonusDsx1AdmnState would indicate a physical trunk card fault or a carrier-side T1 outage. Checking sonusDsx1AdmnDs3Index helps trace which parent DS3 span and card the affected DS1 channel belongs to, narrowing down the hardware root cause.
What Can Be Monitored
- DS1 interface administrative state
- shelf/slot/port trunk location
- DS3-to-DS1 channel mapping
- trunk interface configuration/profile
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE |
From SNMPv2-TC
| DisplayString | |
| RowStatus |
From SONUS-COMMON-MIB
| sonusDs1Index | OBJECT-TYPE |
| sonusDs3Index | OBJECT-TYPE |
| sonusEventClass | OBJECT-TYPE |
| sonusEventDescription | OBJECT-TYPE |
| sonusEventLevel | OBJECT-TYPE |
| sonusPortIndex | OBJECT-TYPE |
| sonusShelfIndex | OBJECT-TYPE |
| sonusSlotIndex | OBJECT-TYPE |
From SONUS-SMI
| sonusCircuitMIBs | OBJECT-IDENTITY |
From SONUS-TC
| SonusAdminAction | |
| SonusAdminState | |
| SonusName | |
| SonusServiceState |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| sonusDsx1MIB | 1.3.6.1.4.1.2879.2.4.1 | The MIB Module for DS1 Management. | ||
| sonusDsx1MIBObjects | 1.3.6.1.4.1.2879.2.4.1.1 | |||
| sonusDsx1Admn | 1.3.6.1.4.1.2879.2.4.1.1.1 | |||
| sonusDsx1AdmnNextIndex | 1.3.6.1.4.1.2879.2.4.1.1.1.1 | |||
| sonusDsx1AdmnTable | 1.3.6.1.4.1.2879.2.4.1.1.1.2 | not-accessible | Table of Sonus Enterprise Configurations for all DS1s | |
| sonusDsx1AdmnEntry | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1 | not-accessible | Entry in Table consisting of the all the Sonus Enterprise DS1 Configurations | |
| ROW sonusDsx1AdmnRowStatus | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.1 | RowStatus | read-write | DS1, Needed for SNMP |
| SON sonusDsx1AdmnName | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.2 | SonusName | read-write | Name of this T1/E1 Span |
| STR sonusDsx1AdmnProfileName | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.3 | DisplayString | read-write | The name of the profile applied to this T1/E1 Table |
| I32 sonusDsx1AdmnShelfIndex | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.4 | Integer32 | read-only | Shelf index for this table |
| I32 sonusDsx1AdmnSlotIndex | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.5 | Integer32 | read-only | Slot index for this table |
| I32 sonusDsx1AdmnPortIndex | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.6 | Integer32 | read-only | Port Index into this table |
| I32 sonusDsx1AdmnDs3Index | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.7 | Integer32 | read-only | Ds3 Index into this table |
| I32 sonusDsx1AdmnDs1Index | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.8 | Integer32 | read-only | Ds1 Index into this table |
| I32 sonusDsx1AdmnIfIndex | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.9 | Integer32 | read-only | If Index for the corresponding standard MIB table |
| SON sonusDsx1AdmnState | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.10 | SonusAdminState | read-write | State of T1/E1, Enabled/Disabled |
| INT sonusDsx1AdmnLineBuildOut | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.11 | INTEGER | read-write | Line build out of T1/E1 |
| I32 sonusDsx1AdmnTimeout | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.12 | Integer32 | read-write | Max time in minutes before dryup takes place |
| SON sonusDsx1AdmnMode | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.13 | SonusServiceState | read-write | T1/E1 span is in service or out of service. |
| SON sonusDsx1AdmnAction | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.14 | SonusAdminAction | read-write | Force out of service or wait for dryup |
| I32 sonusDsx1AdmnIdleCode | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.15 | Integer32 | read-write | Idle code to be applied to the channels |
| BIT sonusDsx1AdmnAvailChannels | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.16 | Bits | read-write | Bitstring map of channels that are available on this T1/E1 span. |
| INT sonusDsx1AdmnType | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.17 | INTEGER | read-write | Type of DSx1. Indicates whether this span is a T1 span or E1 span. |
| I32 sonusDsx1AdmnESThreshold | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.18 | Integer32 | read-write | Errored Seconds threshold value for 15 minute interval. This is for near end. |
| I32 sonusDsx1AdmnSESThreshold | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.19 | Integer32 | read-write | Severely Errored Seconds threshold value for 15 minute interval. This is for near end. |
| I32 sonusDsx1AdmnCSSThreshold | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.20 | Integer32 | read-write | Severely Errored Seconds threshold value for 15 minute interval. This is for near end. |
| I32 sonusDsx1AdmnDayESThreshold | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.21 | Integer32 | read-write | Errored Seconds threshold value for a day. This is for near end. |
| I32 sonusDsx1AdmnDaySESThreshold | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.22 | Integer32 | read-write | Severely Errored Seconds threshold value for a day. This is for near end. |
| I32 sonusDsx1AdmnDayCSSThreshold | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.23 | Integer32 | read-write | Severely Errored Seconds threshold value for a day. This is for near end. |
| I32 sonusDsx1AdmnFarESThreshold | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.24 | Integer32 | read-write | Errored Seconds threshold value for 15 minute interval. This is for far end. |
| I32 sonusDsx1AdmnFarSESThreshold | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.25 | Integer32 | read-write | Severely Errored Seconds threshold value for 15 minute interval. This is for far end. |
| I32 sonusDsx1AdmnFarDayESThreshold | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.26 | Integer32 | read-write | Errored Seconds threshold value for a day. This is for far end. |
| I32 sonusDsx1AdmnFarDaySESThreshold | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.27 | Integer32 | read-write | Severely Errored Seconds threshold value for a day. This is for far end. |
| I32 sonusDsx1AdmnPCVThreshold | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.28 | Integer32 | read-write | Path Code Violations threshold value for 15 minute interval. This is for near end. |
| I32 sonusDsx1AdmnLCVThreshold | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.29 | Integer32 | read-write | Line Code Violations threshold value for 15 minute interval. This is for near end. |
| I32 sonusDsx1AdmnUASThreshold | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.30 | Integer32 | read-write | Unavailable Seconds threshold value for 15 minute interval. This is for near end. |
| I32 sonusDsx1AdmnFarPCVThreshold | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.31 | Integer32 | read-write | Path Code Violations threshold value for 15 minute interval. This is for far end. |
| I32 sonusDsx1AdmnFarLCVThreshold | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.32 | Integer32 | read-write | Line Code Violations threshold value for 15 minute interval. This is for far end. |
| I32 sonusDsx1AdmnFarUASThreshold | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.33 | Integer32 | read-write | Unavailable Seconds threshold value for 15 minute interval. This is for far end. |
| I32 sonusDsx1AdmnDayPCVThreshold | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.34 | Integer32 | read-write | Path Code Violations threshold value for a day. This is for near end. |
| I32 sonusDsx1AdmnDayLCVThreshold | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.35 | Integer32 | read-write | Line Code Violations threshold value for a day. This is for near end. |
| I32 sonusDsx1AdmnDayUASThreshold | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.36 | Integer32 | read-write | Unavailable Seconds threshold value for a day. This is for near end. |
| I32 sonusDsx1AdmnFarDayPCVThreshold | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.37 | Integer32 | read-write | Path Code Violations threshold value for a day. This is for far end. |
| I32 sonusDsx1AdmnFarDayLCVThreshold | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.38 | Integer32 | read-write | Line Code Violations threshold value for a day. This is for far end. |
| I32 sonusDsx1AdmnFarDayUASThreshold | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.39 | Integer32 | read-write | Unavailable Seconds threshold value for a day. This is for far end. |
| SON sonusDsx1AdmnInitCounters | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.40 | SonusAdminState | read-write | Used to initialize all counters. Once enabled clears all T1/E1 counters. |
| STR sonusDsx1AdmnEchoProfileName | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.41 | DisplayString | read-write | The name of the Echo Canceller profile applied to this T1/E1 Table |
| INT sonusDsx1AdmnEchoCancellorMaxTail | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.42 | INTEGER | read-only | Maximum Echo canceller tail length |
| INT sonusDsx1AdmnEchoCancellorAudioType | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.43 | INTEGER | read-only | Echo Canceller Audio encoding type A-law or U-law |
| INT sonusDsx1AdmnEchoCancellorSignallingTone | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.44 | INTEGER | read-only | Echo Cancellation: None, 2400, 2600 or 2101 Hz |
| I32 sonusDsx1AdmnEchoCancellorNlpDisable | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.45 | Integer32 | read-only | Echo Canceller Non-linear processing control, Disable |
| I32 sonusDsx1AdmnEchoCancellorNlpEnable | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.46 | Integer32 | read-only | Echo canceller Non-linear processing control, Enable |
| INT sonusDsx1AdmnEchoCancellorReturnLoss | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.47 | INTEGER | read-only | For Network Echo Cancellation, specifies the echo return loss in dB's. Default value is 6dB. |
| INT sonusDsx1AdmnEchoCancellorResidualEcho | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.48 | INTEGER | read-only | For Network Echo Cancellation, specifies the residual echo cancellation. |
| INT sonusDsx1AdmnEchoCancellorHiLevelComp | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.49 | INTEGER | read-only | For Network Echo Cancellation, the high level compensation value. Default value is to attenuate by 6dB. |
| INT sonusDsx1AdmnEchoCancellorModemDisable | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.50 | INTEGER | read-only | For Network Echo Cancellation, specifies whether to disable echo cancellation when a modem tone is detected. |
| INT sonusDsx1AdmnZeroSuppression | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.51 | INTEGER | read-write | T1 span zero suppression control. |
| STR sonusDsx1AdmnCircuitId | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.52 | DisplayString | read-write | The Circuit Id. |
| INT sonusDsx1AdmnEchoCancellorNarrowbandDetection | 1.3.6.1.4.1.2879.2.4.1.1.1.2.1.53 | INTEGER | read-only | For Network Echo Cancellation, narrow band detection is OFF or ON. If set ON it narrows the G.164 detection bandwidth in G.165 mode to the G.165 band. |
| sonusDsx1StatTable | 1.3.6.1.4.1.2879.2.4.1.1.2 | not-accessible | Table of Sonus Enterprise Status for all DS1s | |
| sonusDsx1StatEntry | 1.3.6.1.4.1.2879.2.4.1.1.2.1 | not-accessible | Entry in Table consisting of the all the Sonus Enterprise DS1 Status | |
| I32 sonusDsx1StatShelfIndex | 1.3.6.1.4.1.2879.2.4.1.1.2.1.1 | Integer32 | read-only | Shelf index into this table |
| I32 sonusDsx1StatSlotIndex | 1.3.6.1.4.1.2879.2.4.1.1.2.1.2 | Integer32 | read-only | Slot index into this table |
| I32 sonusDsx1StatPortIndex | 1.3.6.1.4.1.2879.2.4.1.1.2.1.3 | Integer32 | read-only | Port Index into this table |
| I32 sonusDsx1StatDs3Index | 1.3.6.1.4.1.2879.2.4.1.1.2.1.4 | Integer32 | read-only | Ds3 Index into this table |
| I32 sonusDsx1StatDs1Index | 1.3.6.1.4.1.2879.2.4.1.1.2.1.5 | Integer32 | read-only | Ds1 Index into this table |
| I32 sonusDsx1StatValidInt | 1.3.6.1.4.1.2879.2.4.1.1.2.1.6 | Integer32 | read-only | Number of valid intervals of Performance Monitoring |
| I32 sonusDsx1StatRxSlips | 1.3.6.1.4.1.2879.2.4.1.1.2.1.7 | Integer32 | read-only | Number of frame slips in the receive direction. |
| I32 sonusDsx1StatTxSlips | 1.3.6.1.4.1.2879.2.4.1.1.2.1.8 | Integer32 | read-only | Number of frame slips in the transmit direction. |
| I32 sonusDsx1StatLOF | 1.3.6.1.4.1.2879.2.4.1.1.2.1.9 | Integer32 | read-only | Number of Loss of Frame defects that have occured. |
| I32 sonusDsx1StatAIS | 1.3.6.1.4.1.2879.2.4.1.1.2.1.10 | Integer32 | read-only | Number of AIS alarms that have occured. |
| I32 sonusDsx1StatRAI | 1.3.6.1.4.1.2879.2.4.1.1.2.1.11 | Integer32 | read-only | Number of RAI alarms that have occured. |
| I32 sonusDsx1StatRED | 1.3.6.1.4.1.2879.2.4.1.1.2.1.12 | Integer32 | read-only | Number of RED alarms that have occured. |
| I32 sonusDsx1StatCRC | 1.3.6.1.4.1.2879.2.4.1.1.2.1.13 | Integer32 | read-only | Number T1 CRC framing errors that have occured. |
| I32 sonusDsx1StatCOFA | 1.3.6.1.4.1.2879.2.4.1.1.2.1.14 | Integer32 | read-only | Number of Change of Frame Alignments that have occured. |
| I32 sonusDsx1StatFBE | 1.3.6.1.4.1.2879.2.4.1.1.2.1.15 | Integer32 | read-only | Number framing bit errors that have occured. |
| STR sonusDsx1StatStatus | 1.3.6.1.4.1.2879.2.4.1.1.2.1.16 | DisplayString | read-only | T1/E1 span status. Indicates if port in alarm state, loopback state etc. |
| STR sonusDsx1StatAllocChannels | 1.3.6.1.4.1.2879.2.4.1.1.2.1.17 | DisplayString | read-only | String display showing bitmap of channels that are currently allocated. A 1 indicates that the channel is allocated. |
| STR sonusDsx1StatEnabChannels | 1.3.6.1.4.1.2879.2.4.1.1.2.1.18 | DisplayString | read-only | String display showing bitmap of channels that are currently enabled A 1 indicates that the channel is allocated. |
| I32 sonusE1StatLOMF | 1.3.6.1.4.1.2879.2.4.1.1.2.1.19 | Integer32 | read-only | Number of Loss of Multiframe alignments that have occured. |
| I32 sonusE1StatMFError | 1.3.6.1.4.1.2879.2.4.1.1.2.1.20 | Integer32 | read-only | Number of Multiframe CRC errors that have occured. |
| I32 sonusE1StatFEBE | 1.3.6.1.4.1.2879.2.4.1.1.2.1.21 | Integer32 | read-only | Number of Far End Block errors that have occured. |
| I32 sonusE1StatOOOF | 1.3.6.1.4.1.2879.2.4.1.1.2.1.22 | Integer32 | read-only | Number of Out of ofline framer errors that have occured. |
| I32 sonusE1StatC2NCIWCK | 1.3.6.1.4.1.2879.2.4.1.1.2.1.23 | Integer32 | read-only | Number of CRC 2 Non CRC framing events that have occured. |
| I32 sonusE1StatRAIContCRC | 1.3.6.1.4.1.2879.2.4.1.1.2.1.24 | Integer32 | read-only | Number of RAI and Continuous CRC errors that have occured. |
| I32 sonusE1StatContFEBE | 1.3.6.1.4.1.2879.2.4.1.1.2.1.25 | Integer32 | read-only | Number of Continuous FEBE errors that have occured. |
| I32 sonusE1StatExcessCRC | 1.3.6.1.4.1.2879.2.4.1.1.2.1.26 | Integer32 | read-only | Number of Excessive CRC errors that have occured. |
| I32 sonusE1StatFASErr | 1.3.6.1.4.1.2879.2.4.1.1.2.1.27 | Integer32 | read-only | Number of Frame Alignment Sequence Errors. |
| INT sonusDsx1StatSendPattern | 1.3.6.1.4.1.2879.2.4.1.1.2.1.28 | INTEGER | read-only | Indicates status of SendCode variable for PATTERNS ONLY - does not include SendCodes that require loopback. |
| INT sonusDsx1StatStatusCode | 1.3.6.1.4.1.2879.2.4.1.1.2.1.29 | INTEGER | read-only | T1/E1 span status. Indicates if port in alarm state, loopback state etc. Integer version of sonusDsx1StatStatus variable. |
| INT sonusDsx1StatLoopbackStatus | 1.3.6.1.4.1.2879.2.4.1.1.2.1.30 | INTEGER | read-only | T1 loopback status display. Indicates loopback STATUS of T1 port. |
| INT sonusDsx1StatOperStatus | 1.3.6.1.4.1.2879.2.4.1.1.2.1.31 | INTEGER | read-only | The actual status of the DS1 interface. Interface is Up if it is administratively in service and there are no line failures or hardware failures. Interface is Down if it is administratively in service and there are line failures or hardware failures, or if it is administratively out of service. Interface is DryingUp if it is administratively out of service and is drying up (no new calls, still carrying in-progress calls). |
| sonusDs0AdmnTable | 1.3.6.1.4.1.2879.2.4.1.1.3 | not-accessible | Table of Sonus Enterprise Configuration for DS0s | |
| sonusDs0AdmnEntry | 1.3.6.1.4.1.2879.2.4.1.1.3.1 | not-accessible | Entry in Table consisting of the all the Sonus Enterprise Ds0 Configuration | |
| I32 sonusDs0AdmnShelfIndex | 1.3.6.1.4.1.2879.2.4.1.1.3.1.1 | Integer32 | read-only | Shelf Index for this table |
| I32 sonusDs0AdmnSlotIndex | 1.3.6.1.4.1.2879.2.4.1.1.3.1.2 | Integer32 | read-only | Slot index for this table |
| I32 sonusDs0AdmnPortIndex | 1.3.6.1.4.1.2879.2.4.1.1.3.1.3 | Integer32 | read-only | Port Index into this table |
| I32 sonusDs0AdmnDs3Index | 1.3.6.1.4.1.2879.2.4.1.1.3.1.4 | Integer32 | read-only | Ds3 Index into this table |
| I32 sonusDs0AdmnDs1Index | 1.3.6.1.4.1.2879.2.4.1.1.3.1.5 | Integer32 | read-only | DS1 index for this table |
| I32 sonusDs0AdmnDs0Index | 1.3.6.1.4.1.2879.2.4.1.1.3.1.6 | Integer32 | read-only | DS0 index for this table |
| I32 sonusDs0AdmnTimeout | 1.3.6.1.4.1.2879.2.4.1.1.3.1.7 | Integer32 | read-write | Max time in minutes before channel dryup takes place |
| SON sonusDs0AdmnMode | 1.3.6.1.4.1.2879.2.4.1.1.3.1.8 | SonusServiceState | read-write | Channel is in service or out of service. |
| SON sonusDs0AdmnAction | 1.3.6.1.4.1.2879.2.4.1.1.3.1.9 | SonusAdminAction | read-write | Force out of service or wait for dryup |
| INT sonusDs0AdmnState | 1.3.6.1.4.1.2879.2.4.1.1.3.1.10 | INTEGER | read-write | Channel state, available/unavailable |
| I32 sonusDs0AdmnIdleCode | 1.3.6.1.4.1.2879.2.4.1.1.3.1.11 | Integer32 | read-write | Channel Idle Code pattern |
| INT sonusDs0AdmnTone | 1.3.6.1.4.1.2879.2.4.1.1.3.1.12 | INTEGER | read-write | Insert different tones into channel. Digital milliwatt |
| INT sonusDs0AdmnLoopback | 1.3.6.1.4.1.2879.2.4.1.1.3.1.13 | INTEGER | read-write | Put channel in loopback |
| sonusDs1Profile | 1.3.6.1.4.1.2879.2.4.1.1.4 | |||
| I32 sonusDs1ProfileNextIndex | 1.3.6.1.4.1.2879.2.4.1.1.4.1 | Integer32 | read-only | The next valid index to use when creating an entry in the sonusDs1ProfileTable. |
| sonusDs1ProfileTable | 1.3.6.1.4.1.2879.2.4.1.1.4.2 | not-accessible | Table for T1/E1 profile | |
| sonusDs1ProfileEntry | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1 | not-accessible | Entry in Table consisting of T1/E1 profile. The T1/E1 profiles have to be created by users and then configured. These profiles can then be applied onto any T1/E1 span. | |
| ROW sonusDs1ProfileRowStatus | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.1 | RowStatus | read-write | Profile: Row Status Needed for SNMP |
| SON sonusDs1ProfileName | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.2 | SonusName | read-write | Name of this Profile |
| I32 sonusDs1ProfileIndex | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.3 | Integer32 | read-only | Index into the profile table |
| SON sonusDs1ProfileState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.4 | SonusAdminState | read-write | Profile: State |
| INT sonusDs1ProfileDs1LineBO | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.5 | INTEGER | read-write | Profile: DS1 Line build out |
| INT sonusDs1ProfileDs1LineType | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.6 | INTEGER | read-write | Profile: T1/E1 Line type |
| INT sonusDs1ProfileDs1LineCoding | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.7 | INTEGER | read-write | Profile: T1/E1 Line Coding, B8ZS, AMI, HDB3 |
| INT sonusDs1ProfileDs1SignalMode | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.8 | INTEGER | read-write | Profile: T1/E1 Signalling, Robbed Bit or None |
| INT sonusDs1ProfileDs1Fdl | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.9 | INTEGER | read-write | Profile: T1 Facilities Data Link type |
| I32 sonusDs1ProfileDs0IdleCode | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.10 | Integer32 | read-write | Profile: Idle code to be used on all channels in this T1/E1 span |
| BIT sonusDs1ProfileAvailChannels | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.11 | Bits | read-write | Bitstring map of channels that are available on this T1/E1. |
| SON sonusDs1ProfileDs1LineBOState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.12 | SonusAdminState | read-write | Profile: Line Build Out State, used by profile code |
| SON sonusDs1ProfileDs1LineTypeState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.13 | SonusAdminState | read-write | Profile: T1/E1 Line type State, used by profile code |
| SON sonusDs1ProfileDs1LineCodingState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.14 | SonusAdminState | read-write | Profile: T1/E1 Line coding State, used by profile code |
| SON sonusDs1ProfileDs1SignalModeState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.15 | SonusAdminState | read-write | Profile: T1/E1 Signal Mode state, used by profile code |
| SON sonusDs1ProfileDs1FdlState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.16 | SonusAdminState | read-write | Profile: T1/E1 FDL State, used by profile code |
| SON sonusDs1ProfileDs0IdleCodeState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.17 | SonusAdminState | read-write | Profile: Channel Idle Code State, used by profile |
| SON sonusDs1ProfileAvailChannelsState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.18 | SonusAdminState | read-write | Profile: Available channel state, disabled/enabled |
| INT sonusDs1ProfileType | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.19 | INTEGER | read-write | Type of DSx1. Indicates whether this span is a T1 span or E1 span. |
| I32 sonusDs1ProfileESThreshold | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.20 | Integer32 | read-write | Errored Seconds threshold value for 15 minute interval. This is for near end. |
| I32 sonusDs1ProfileSESThreshold | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.21 | Integer32 | read-write | Severely Errored Seconds threshold value for 15 minute interval. This is for near end. |
| I32 sonusDs1ProfileCSSThreshold | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.22 | Integer32 | read-write | Severely Errored Seconds threshold value for 15 minute interval. This is for near end. |
| I32 sonusDs1ProfileDayESThreshold | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.23 | Integer32 | read-write | Errored Seconds threshold value for a day. This is for near end. |
| I32 sonusDs1ProfileDaySESThreshold | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.24 | Integer32 | read-write | Severely Errored Seconds threshold value for a day. This is for near end. |
| I32 sonusDs1ProfileDayCSSThreshold | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.25 | Integer32 | read-write | Severely Errored Seconds threshold value for a day. This is for near end. |
| I32 sonusDs1ProfileFarESThreshold | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.26 | Integer32 | read-write | Errored Seconds threshold value for 15 minute interval. This is for far end. |
| I32 sonusDs1ProfileFarSESThreshold | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.27 | Integer32 | read-write | Severely Errored Seconds threshold value for 15 minute interval. This is for far end. |
| I32 sonusDs1ProfileFarDayESThreshold | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.28 | Integer32 | read-write | Errored Seconds threshold value for a day. This is for far end. |
| I32 sonusDs1ProfileFarDaySESThreshold | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.29 | Integer32 | read-write | Severely Errored Seconds threshold value for a day. This is for far end. |
| I32 sonusDs1ProfilePCVThreshold | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.30 | Integer32 | read-write | Path Code Violations threshold value for 15 minute interval. This is for near end. |
| I32 sonusDs1ProfileLCVThreshold | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.31 | Integer32 | read-write | Line Code Violations threshold value for 15 minute interval. This is for near end. |
| I32 sonusDs1ProfileUASThreshold | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.32 | Integer32 | read-write | Unavailable Seconds threshold value for 15 minute interval. This is for near end. |
| I32 sonusDs1ProfileFarPCVThreshold | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.33 | Integer32 | read-write | Path Code Violations threshold value for 15 minute interval. This is for far end. |
| I32 sonusDs1ProfileFarLCVThreshold | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.34 | Integer32 | read-write | Line Code Violations threshold value for 15 minute interval. This is for far end. |
| I32 sonusDs1ProfileFarUASThreshold | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.35 | Integer32 | read-write | Unavailable Seconds threshold value for 15 minute interval. This is for far end. |
| I32 sonusDs1ProfileDayPCVThreshold | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.36 | Integer32 | read-write | Path Code Violations threshold value for a day. This is for near end. |
| I32 sonusDs1ProfileDayLCVThreshold | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.37 | Integer32 | read-write | Line Code Violations threshold value for a day. This is for near end. |
| I32 sonusDs1ProfileDayUASThreshold | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.38 | Integer32 | read-write | Unavailable Seconds threshold value for a day. This is for near end. |
| I32 sonusDs1ProfileFarDayPCVThreshold | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.39 | Integer32 | read-write | Path Code Violations threshold value for a day. This is for far end. |
| I32 sonusDs1ProfileFarDayLCVThreshold | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.40 | Integer32 | read-write | Line Code Violations threshold value for a day. This is for far end. |
| I32 sonusDs1ProfileFarDayUASThreshold | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.41 | Integer32 | read-write | Unavailable Seconds threshold value for a day. This is for far end. |
| SON sonusDs1ProfileESThresholdState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.42 | SonusAdminState | read-write | Errored Seconds threshold profile state. |
| SON sonusDs1ProfileSESThresholdState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.43 | SonusAdminState | read-write | Severely Errored Seconds profile state. |
| SON sonusDs1ProfileCSSThresholdState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.44 | SonusAdminState | read-write | Severely Errored Seconds profile state. |
| SON sonusDs1ProfileDayESThresholdState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.45 | SonusAdminState | read-write | Errored Seconds threshold profile state. |
| SON sonusDs1ProfileDaySESThresholdState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.46 | SonusAdminState | read-write | Severely Errored Seconds threshold profile state. |
| SON sonusDs1ProfileDayCSSThresholdState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.47 | SonusAdminState | read-write | Severely Errored Seconds threshold profile state. |
| SON sonusDs1ProfileFarESThresholdState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.48 | SonusAdminState | read-write | Errored Seconds threshold profile state. |
| SON sonusDs1ProfileFarSESThresholdState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.49 | SonusAdminState | read-write | Severely Errored Seconds threshold profile state. |
| SON sonusDs1ProfileFarDayESThresholdState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.50 | SonusAdminState | read-write | Errored Seconds threshold profile state. |
| SON sonusDs1ProfileFarDaySESThresholdState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.51 | SonusAdminState | read-write | Severely Errored Seconds threshold profile state. |
| SON sonusDs1ProfilePCVThresholdState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.52 | SonusAdminState | read-write | Path Code Violations threshold profile state. |
| SON sonusDs1ProfileLCVThresholdState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.53 | SonusAdminState | read-write | Line Code Violations threshold profile state. |
| SON sonusDs1ProfileUASThresholdState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.54 | SonusAdminState | read-write | Unavailable Seconds threshold profile state. |
| SON sonusDs1ProfileFarPCVThresholdState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.55 | SonusAdminState | read-write | Path Code Violations threshold profile state. |
| SON sonusDs1ProfileFarLCVThresholdState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.56 | SonusAdminState | read-write | Line Code Violations threshold profile state. |
| SON sonusDs1ProfileFarUASThresholdState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.57 | SonusAdminState | read-write | Unavailable Seconds threshold profile state. |
| SON sonusDs1ProfileDayPCVThresholdState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.58 | SonusAdminState | read-write | Path Code Violations threshold profile state. |
| SON sonusDs1ProfileDayLCVThresholdState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.59 | SonusAdminState | read-write | Line Code Violations threshold profile state. |
| SON sonusDs1ProfileDayUASThresholdState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.60 | SonusAdminState | read-write | Unavailable Seconds threshold profile state. |
| SON sonusDs1ProfileFarDayPCVThresholdState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.61 | SonusAdminState | read-write | Path Code Violations threshold profile state. |
| SON sonusDs1ProfileFarDayLCVThresholdState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.62 | SonusAdminState | read-write | Line Code Violations threshold state. |
| SON sonusDs1ProfileFarDayUASThresholdState | 1.3.6.1.4.1.2879.2.4.1.1.4.2.1.63 | SonusAdminState | read-write | Unavailable Seconds threshold profile state. |
| sonusDsx1MIBNotifications | 1.3.6.1.4.1.2879.2.4.1.2 | |||
| sonusDsx1MIBNotificationsPrefix | 1.3.6.1.4.1.2879.2.4.1.2.0 | |||
| NTF sonusDsx1AdminChangeNotification | 1.3.6.1.4.1.2879.2.4.1.2.0.1 | A sonusDsx1AdminChangeNotification trap indicates the DS1 admin changes. It is used to notify out-of-service, in-service, enabled and disabled | ||
| NTF sonusDsx1OutOfServiceNotification | 1.3.6.1.4.1.2879.2.4.1.2.0.2 | A sonusDsx1OutOfServiceNotification trap indicates that a T1/E1 span went out of service. The reason indicates the reason why and type indicates the type of failure or alarm. | ||
| NTF sonusDsx1ThresholdCrossingNotification | 1.3.6.1.4.1.2879.2.4.1.2.0.3 | A sonusDsx1ThresholdCrossingNotification trap indicates that a T1/E1 span threshold has been crossed. The type indicates the type of threshold. | ||
| NTF sonusDsx1LineStatusChangeNotification | 1.3.6.1.4.1.2879.2.4.1.2.0.4 | A sonusDsx1LineStatusChangeNotification trap indicates the T1/E1 span state changes. It is used to notify T1/E1 span Alarms states | ||
| sonusDsx1MIBNotificationsObjects | 1.3.6.1.4.1.2879.2.4.1.2.1 | |||
| INT sonusDs1OutOfServiceReason | 1.3.6.1.4.1.2879.2.4.1.2.1.1 | INTEGER | read-only | The reason for T1/E1 span going out of service |
| INT sonusDs1OutOfServiceType | 1.3.6.1.4.1.2879.2.4.1.2.1.2 | INTEGER | read-only | The type of operation which caused T1/E1 span to go out of service |
| INT sonusDs1ThresholdType | 1.3.6.1.4.1.2879.2.4.1.2.1.3 | INTEGER | read-only | Type of threshold that was crossed which caused a threshold crossing trap |
| INT sonusDs1LineState | 1.3.6.1.4.1.2879.2.4.1.2.1.4 | INTEGER | read-only | The type of Alarm or failure which caused T1/E1 span to go out of service |
| INT sonusDs1AdmnState | 1.3.6.1.4.1.2879.2.4.1.2.1.5 | INTEGER | read-only | The administrative state of the T1/E1 span. |
RFC description
DS1/T1 circuit management and administration for Sonus VoIP network systems.
Start monitoring Sonus Networks softswitch/media gateway (DS1/T1 TDM trunk interface status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.