SNAP-SWITCH-MIB :: sk602xSwitchIPAddress

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SNAP-SWITCH-MIB › sk602xSwitchIPAddress

sk602xSwitchIPAddress

Module: SNAP-SWITCH-MIB

OID (symbolic): SNAP-SWITCH-MIB::sk602xSwitchIPAddress

OID (numeric): 1.3.6.1.4.1.179.2.2.3.1

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: Since bridges can now be accessed without an IP address, there needs to be a way to find out there addresses.

What is sk602xSwitchIPAddress?

The switch's own management IP address; the MIB notes this object exists because bridges can be accessed without needing an IP address configured, so this gives a way to discover it if one is set.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.179.2.2.3.1
snmpwalk -v2c -c public <target> SNAP-SWITCH-MIB::sk602xSwitchIPAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.179.2.2.3.1.1
snmpget -v2c -c public <target> SNAP-SWITCH-MIB::sk602xSwitchIPAddress.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.179.2.2.3.1.1 a <value>

Start monitoring SysKonnect SnapSwitch 6020 FDDI switch (port link/duplex status, power-up counter) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNAP-SWITCH-MIB::sk602xSwitchIPAddress OID value, configure state conditions and alerts, and monitor any SysKonnect SnapSwitch 6020 FDDI switch (port link/duplex status, power-up counter) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.179skSK-CONC-MIB
1.3.6.1.4.1.179.2skMibsSK-CONC-MIB
1.3.6.1.4.1.179.2.2sk_boardSK-UPPS-MIB
1.3.6.1.4.1.179.2.2.3ethSK-UPPS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.179.2.2.3.1sk602xSwitchIPAddressSNAP-SWITCH-MIB