SLP1-MIB

All MIBs › SLP1-MIB

Organization: Lantronix

Last Updated: 2004-12-09

Category: Environmental Monitoring and Power, Lantronix Device Management

Description: Manages Lantronix SLP1 smart power strip outlet switching, power metering, and environmental monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SLP1-MIB?

SLP1-MIB is Lantronix's proprietary MIB for the SecureLinx Power Manager (SLP), a smart, network-managed power distribution unit (PDU)/power strip used in data centers and equipment racks. It exposes objects for controlling and monitoring individual outlets (on/off/reboot state), power metering (current, voltage, load), and basic environmental readings from attached sensors. This MIB is squarely a hardware-status monitoring MIB: it lets administrators check outlet power state, detect overload or overcurrent conditions, and monitor environmental conditions (such as temperature/humidity via optional probes) at the rack level, functioning as an early-warning system for power or thermal problems. It is largely self-contained but is commonly deployed alongside standard IF-MIB/SNMPv2-MIB objects for basic device identification and uptime. Typical deployment context is remote/lights-out data center and telecom equipment rooms where staff need to remotely power-cycle servers or networking gear and track rack-level power consumption. Engineers can download the SLP1-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SLP1-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Lantronix SecureLinx Power Manager (SLP) smart PDU/power strip

Monitoring Examples

An admin would poll the outlet control and status table (conceptually outletTable/outletEntry with objects like outletName, outletStatus, outletCurrent) to confirm which outlets are energized and how much current each is drawing. Combined with power metering objects (e.g., inputCurrent, inputVoltage), a sudden spike above a configured threshold would flag an overloaded circuit before a breaker trips. Environmental sensor objects would similarly be polled to catch rising rack temperature indicative of cooling failure.

What Can Be Monitored

outlet on/off state
per-outlet current draw
input voltage/current
overload/overcurrent alarms
environmental sensor readings

Imported Objects

From SNMPv2-SMI

MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
lantronix	1.3.6.1.4.1.244
products	1.3.6.1.4.1.244.1
slp	1.3.6.1.4.1.244.1.9
slp1	1.3.6.1.4.1.244.1.9.1			This is the MIB module for the SecureLinx Power Manager.
slp1SystemGroup	1.3.6.1.4.1.244.1.9.1.1
STR slp1SystemVersion	1.3.6.1.4.1.244.1.9.1.1.1	DisplayString	read-only	The firmware version of the system.
STR slp1SystemNICSerialNumber	1.3.6.1.4.1.244.1.9.1.1.2	DisplayString	read-only	The serial number of the network interface card in the system.
STR slp1SystemLocation	1.3.6.1.4.1.244.1.9.1.1.3	DisplayString	read-write	The location of the system.
INT slp1SystemTowerCount	1.3.6.1.4.1.244.1.9.1.1.4	INTEGER	read-only	The number of towers in the system.
INT slp1SystemEnvMonCount	1.3.6.1.4.1.244.1.9.1.1.5	INTEGER	read-only	The number of environmental monitors in the system.
slp1SystemTables	1.3.6.1.4.1.244.1.9.1.2
slp1TowerTable	1.3.6.1.4.1.244.1.9.1.2.1		not-accessible	A table of towers.
slp1TowerEntry	1.3.6.1.4.1.244.1.9.1.2.1.1		not-accessible	Row definition for the tower table.
INT slp1TowerIndex	1.3.6.1.4.1.244.1.9.1.2.1.1.1	INTEGER	not-accessible	Index for the tower table.
STR slp1TowerID	1.3.6.1.4.1.244.1.9.1.2.1.1.2	DisplayString	read-only	The ID of the tower.
STR slp1TowerName	1.3.6.1.4.1.244.1.9.1.2.1.1.3	DisplayString	read-write	The name of the tower.
INT slp1TowerStatus	1.3.6.1.4.1.244.1.9.1.2.1.1.4	INTEGER	read-only	The operational status of the tower.
INT slp1TowerInfeedCount	1.3.6.1.4.1.244.1.9.1.2.1.1.5	INTEGER	read-only	The number of input feeds on the tower.
slp1InfeedTable	1.3.6.1.4.1.244.1.9.1.2.2		not-accessible	A table of input feeds.
slp1InfeedEntry	1.3.6.1.4.1.244.1.9.1.2.2.1		not-accessible	Row definition for the input feed table.
INT slp1InfeedIndex	1.3.6.1.4.1.244.1.9.1.2.2.1.1	INTEGER	not-accessible	Index for the input feed table.
STR slp1InfeedID	1.3.6.1.4.1.244.1.9.1.2.2.1.2	DisplayString	read-only	The ID of the input feed.
STR slp1InfeedName	1.3.6.1.4.1.244.1.9.1.2.2.1.3	DisplayString	read-write	The name of the input feed.
BIT slp1InfeedCapabilities	1.3.6.1.4.1.244.1.9.1.2.2.1.4	Bits	read-only	The capabilities of the input feed.
INT slp1InfeedStatus	1.3.6.1.4.1.244.1.9.1.2.2.1.5	INTEGER	read-only	The status of the input feed. If the slp1InfeedCapabilities 'onSense' bit is TRUE, then all of the states are supported and indicate the sensed state of the input feed. If the slp1InfeedCapabilities 'onSense' bit is FALSE, then only the 'on' and 'noComm' states are supported, and 'on' indicates a derived state, not a sensed state.
INT slp1InfeedLoadStatus	1.3.6.1.4.1.244.1.9.1.2.2.1.6	INTEGER	read-only	The status of the load measured on the input feed. If the slp1InfeedCapabilities 'loadSense' bit is TRUE, then all of the states are supported. If the slp1InfeedCapabilities 'loadSense' bit is FALSE, then only the 'normal' and 'noComm' states are supported.
INT slp1InfeedLoadValue	1.3.6.1.4.1.244.1.9.1.2.2.1.7	INTEGER	read-only	The load measured on the input feed. A non-negative value indicates the measured load in hundredths of Amps. A negative value indicates that a load value was not able to be measured.
INT slp1InfeedLoadHighThresh	1.3.6.1.4.1.244.1.9.1.2.2.1.8	INTEGER	read-write	The load high threshold value of the input feed in Amps.
INT slp1InfeedOutletCount	1.3.6.1.4.1.244.1.9.1.2.2.1.9	INTEGER	read-only	The number of outlets on the input feed.
slp1OutletTable	1.3.6.1.4.1.244.1.9.1.2.3		not-accessible	A table of outlets.
slp1OutletEntry	1.3.6.1.4.1.244.1.9.1.2.3.1		not-accessible	Row definition for the outlet table.
INT slp1OutletIndex	1.3.6.1.4.1.244.1.9.1.2.3.1.1	INTEGER	not-accessible	Index for the outlet table.
STR slp1OutletID	1.3.6.1.4.1.244.1.9.1.2.3.1.2	DisplayString	read-only	The ID of the outlet.
STR slp1OutletName	1.3.6.1.4.1.244.1.9.1.2.3.1.3	DisplayString	read-write	The name of the outlet.
BIT slp1OutletCapabilities	1.3.6.1.4.1.244.1.9.1.2.3.1.4	Bits	read-only	The capabilities of the outlet.
INT slp1OutletStatus	1.3.6.1.4.1.244.1.9.1.2.3.1.5	INTEGER	read-only	The status of the outlet. If the slp1OutletCapabilities 'onSense' bit is TRUE, then all of the states are supported and indicate the sensed state of the outlet. If the slp1OutletCapabilities 'onSense' bit is FALSE, then only the 'off', 'on', and 'noComm' states are supported, and 'off' and 'on' indicate a derived state, not a sensed state.
INT slp1OutletLoadStatus	1.3.6.1.4.1.244.1.9.1.2.3.1.6	INTEGER	read-only	The status of the load measured on the outlet. If the slp1OutletCapabilities 'loadSense' bit is TRUE, then all of the states are supported. If the slp1OutletCapabilities 'loadSense' bit is FALSE, then only the 'normal' and 'noComm' states are supported.
INT slp1OutletLoadValue	1.3.6.1.4.1.244.1.9.1.2.3.1.7	INTEGER	read-only	The load measured on the outlet. A non-negative value indicates the measured load in hundredths of Amps. A negative value indicates that a load value was not able to be measured.
INT slp1OutletLoadLowThresh	1.3.6.1.4.1.244.1.9.1.2.3.1.8	INTEGER	read-write	The load low threshold value of the outlet in Amps.
INT slp1OutletLoadHighThresh	1.3.6.1.4.1.244.1.9.1.2.3.1.9	INTEGER	read-write	The load high threshold value of the outlet in Amps.
INT slp1OutletControlState	1.3.6.1.4.1.244.1.9.1.2.3.1.10	INTEGER	read-only	The control state of the outlet. The supported states are dependent upon the slp1OutletCapabilities 'powerControl' and 'shutdown' bits, as well as the supported features of the firmware version.
INT slp1OutletControlAction	1.3.6.1.4.1.244.1.9.1.2.3.1.11	INTEGER	read-write	An action to change the control state of the outlet. If the slp1OutletCapabilities 'powerControl' bit is TRUE, then the 'on', 'off', and 'reboot' actions can be used to change the control state of the outlet. If the slp1OutletCapabilities 'powerControl' bit is FALSE, then the actions have no effect.
slp1EnvMonTable	1.3.6.1.4.1.244.1.9.1.2.4		not-accessible	A table of environmental monitors.
slp1EnvMonEntry	1.3.6.1.4.1.244.1.9.1.2.4.1		not-accessible	Row definition for the environmental monitor table.
INT slp1EnvMonIndex	1.3.6.1.4.1.244.1.9.1.2.4.1.1	INTEGER	not-accessible	Index for the environmental monitor table.
STR slp1EnvMonID	1.3.6.1.4.1.244.1.9.1.2.4.1.2	DisplayString	read-only	The ID of the environmental monitor.
STR slp1EnvMonName	1.3.6.1.4.1.244.1.9.1.2.4.1.3	DisplayString	read-write	The name of the environmental monitor.
INT slp1EnvMonStatus	1.3.6.1.4.1.244.1.9.1.2.4.1.4	INTEGER	read-only	The operational status of the environmental monitor.
STR slp1EnvMonWaterSensorName	1.3.6.1.4.1.244.1.9.1.2.4.1.5	DisplayString	read-write	The name of the water sensor.
INT slp1EnvMonWaterSensorStatus	1.3.6.1.4.1.244.1.9.1.2.4.1.6	INTEGER	read-only	The status of the water sensor.
STR slp1EnvMonADCName	1.3.6.1.4.1.244.1.9.1.2.4.1.7	DisplayString	read-write	The name of the analog-to-digital converter.
INT slp1EnvMonADCStatus	1.3.6.1.4.1.244.1.9.1.2.4.1.8	INTEGER	read-only	The status of the analog-to-digital converter.
INT slp1EnvMonADCCount	1.3.6.1.4.1.244.1.9.1.2.4.1.9	INTEGER	read-only	The 8-bit count value from the analog-to-digital converter. A non-negative value indicates the digital value retrieved from the ADC. A negative value indicates that a digital value was not able to be retrieved.
INT slp1EnvMonADCLowThresh	1.3.6.1.4.1.244.1.9.1.2.4.1.10	INTEGER	read-write	The 8-bit count low threshold value of the analog-to-digital converter.
INT slp1EnvMonADCHighThresh	1.3.6.1.4.1.244.1.9.1.2.4.1.11	INTEGER	read-write	The 8-bit count high threshold value of the analog-to-digital converter.
INT slp1EnvMonTempHumidSensorCount	1.3.6.1.4.1.244.1.9.1.2.4.1.12	INTEGER	read-only	The number of temperature/humidity sensors on the environmental monitor.
INT slp1EnvMonContactClosureCount	1.3.6.1.4.1.244.1.9.1.2.4.1.13	INTEGER	read-only	The number of contact closures on the environmental monitor.
slp1TempHumidSensorTable	1.3.6.1.4.1.244.1.9.1.2.5		not-accessible	A table of temperature/humidity sensors.
slp1TempHumidSensorEntry	1.3.6.1.4.1.244.1.9.1.2.5.1		not-accessible	Row definition for the temperature/humidity sensor table.
INT slp1TempHumidSensorIndex	1.3.6.1.4.1.244.1.9.1.2.5.1.1	INTEGER	not-accessible	Index for the temperature/humidity sensor table.
STR slp1TempHumidSensorID	1.3.6.1.4.1.244.1.9.1.2.5.1.2	DisplayString	read-only	The ID of the temperature/humidity sensor.
STR slp1TempHumidSensorName	1.3.6.1.4.1.244.1.9.1.2.5.1.3	DisplayString	read-write	The name of the temperature/humidity sensor.
INT slp1TempHumidSensorStatus	1.3.6.1.4.1.244.1.9.1.2.5.1.4	INTEGER	read-only	The operational status of the temperature/humidity sensor.
INT slp1TempHumidSensorTempStatus	1.3.6.1.4.1.244.1.9.1.2.5.1.5	INTEGER	read-only	The status of the temperature sensor.
INT slp1TempHumidSensorTempValue	1.3.6.1.4.1.244.1.9.1.2.5.1.6	INTEGER	read-only	The temperature measured by the sensor. A non-negative value indicates the measured temperature in tenths of degrees Celsius. A negative value indicates that a temperature value was not able to be measured.
INT slp1TempHumidSensorTempLowThresh	1.3.6.1.4.1.244.1.9.1.2.5.1.7	INTEGER	read-write	The temperature low threshold value of the sensor in degrees Celsius.
INT slp1TempHumidSensorTempHighThresh	1.3.6.1.4.1.244.1.9.1.2.5.1.8	INTEGER	read-write	The temperature high threshold value of the sensor in degrees Celsius.
INT slp1TempHumidSensorHumidStatus	1.3.6.1.4.1.244.1.9.1.2.5.1.9	INTEGER	read-only	The status of the humidity sensor.
INT slp1TempHumidSensorHumidValue	1.3.6.1.4.1.244.1.9.1.2.5.1.10	INTEGER	read-only	The humidity measured by the sensor. A non-negative value indicates the measured humidity in percentage relative humidity. A negative value indicates that a humidity value was not able to be measured.
INT slp1TempHumidSensorHumidLowThresh	1.3.6.1.4.1.244.1.9.1.2.5.1.11	INTEGER	read-write	The humidity low threshold value of the sensor in percentage relative humidity.
INT slp1TempHumidSensorHumidHighThresh	1.3.6.1.4.1.244.1.9.1.2.5.1.12	INTEGER	read-write	The humidity low threshold value of the sensor in percentage relative humidity.
slp1ContactClosureTable	1.3.6.1.4.1.244.1.9.1.2.6		not-accessible	A table of contact closures.
slp1ContactClosureEntry	1.3.6.1.4.1.244.1.9.1.2.6.1		not-accessible	Row definition for the contact closure table.
INT slp1ContactClosureIndex	1.3.6.1.4.1.244.1.9.1.2.6.1.1	INTEGER	not-accessible	Index for the contact closure table.
STR slp1ContactClosureID	1.3.6.1.4.1.244.1.9.1.2.6.1.2	DisplayString	read-only	The ID of the contact closure.
STR slp1ContactClosureName	1.3.6.1.4.1.244.1.9.1.2.6.1.3	DisplayString	read-write	The name of the contact closure.
INT slp1ContactClosureStatus	1.3.6.1.4.1.244.1.9.1.2.6.1.4	INTEGER	read-only	The status of the contact closure.
slp1Traps	1.3.6.1.4.1.244.1.9.1.100
slp1Events	1.3.6.1.4.1.244.1.9.1.100.0
NTF slp1TowerStatusEvent	1.3.6.1.4.1.244.1.9.1.100.0.1			Tower status event. If enabled, this trap is sent when the slp1TowerStatus indicates an error state ('noComm'). This trap is repeated periodically while the slp1TowerStatus remains in an error state. If the slp1TowerStatus returns to a non-error state ('normal'), this trap is sent once more with the non-error slp1TowerStatus, and then stops being repeated. While the slp1TowerStatus indicates an error state, all status and load traps are suppressed for input feeds and outlets on the tower.
NTF slp1InfeedStatusEvent	1.3.6.1.4.1.244.1.9.1.100.0.2			Input feed status event. If enabled, this trap is sent when the slp1InfeedStatus indicates an error state ('offError', 'onError', or 'noComm'). This trap is repeated periodically while the slp1InfeedStatus remains in an error state. If the slp1InfeedStatus returns to a non-error state ('off' or 'on'), this trap is sent once more with the non-error slp1InfeedStatus, and then stops being repeated. While the slp1InfeedStatus indicates an error state, load traps are suppressed for the input feed, and, if the slp1InfeedCapabilities 'failSafe' bit is FALSE, all status and load traps are suppressed for outlets on the input feed.
NTF slp1InfeedLoadEvent	1.3.6.1.4.1.244.1.9.1.100.0.3			Input feed load event. If enabled, this trap is sent when the slp1InfeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the slp1InfeedLoadStatus remains in an error state. If the slp1InfeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error slp1InfeedLoadStatus, and then stops being repeated.
NTF slp1OutletStatusEvent	1.3.6.1.4.1.244.1.9.1.100.0.4			Outlet status event. If enabled, this trap is sent when the slp1OutletStatus indicates an error state ('offError', 'onError', or 'noComm'). This trap is repeated periodically while the slp1OutletStatus remains in an error state. If the slp1OutletStatus returns to a non-error state ('off' or 'on'), this trap is sent once more with the non-error slp1OutletStatus, and then stops being repeated. While the slp1OutletStatus indicates an error state, load traps are suppressed for the outlet.
NTF slp1OutletLoadEvent	1.3.6.1.4.1.244.1.9.1.100.0.5			Outlet load event. If enabled, this trap is sent when the slp1OutletLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the slp1OutletLoadStatus remains in an error state. If the slp1OutletLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error slp1OutletLoadStatus, and then stops being repeated.
NTF slp1OutletChangeEvent	1.3.6.1.4.1.244.1.9.1.100.0.6			Outlet on/off change event. If enabled, this trap is sent when the slp1OutletStatus changes from any 'on' state ('on', 'onWait' or 'onError') to any 'off' state ('off', 'offWait' or 'offError'), and vice-versa.
NTF slp1EnvMonStatusEvent	1.3.6.1.4.1.244.1.9.1.100.0.7			Environmental monitor status event. If enabled, this trap is sent when the slp1EnvMonStatus indicates an error state ('noComm'). This trap is repeated periodically while the slp1EnvMonStatus remains in an error state. If the slp1EnvMonStatus returns to a non-error state ('normal'), this trap is sent once more with the non-error slp1EnvMonStatus, and then stops being repeated. While the slp1EnvMonStatus indicates an error state, all status traps are suppressed for the water sensor, ADC, temperature/humudity sensors, and contact closures on the environmental monitor.
NTF slp1EnvMonWaterSensorEvent	1.3.6.1.4.1.244.1.9.1.100.0.8			Environmental monitor water sensor event. If enabled, this trap is sent when the slp1EnvMonWaterSensorStatus indicates an error state ('alarm'). This trap is repeated periodically while the slp1EnvMonWaterSensorStatus remains in an error state. If the slp1EnvMonWaterSensorStatus returns to a non-error state ('normal'), this trap is sent once more with the non-error slp1EnvMonWaterSensorStatus, and then stops being repeated.
NTF slp1EnvMonADCEvent	1.3.6.1.4.1.244.1.9.1.100.0.9			Environmental monitor analog-to-digital converter event. If enabled, this trap is sent when the slp1EnvMonADCStatus indicates an error state ('countLow' or 'countHigh'). This trap is repeated periodically while the slp1EnvMonADCStatus remains in an error state. If the slp1EnvMonADCStatus returns to a non-error state ('normal'), this trap is sent once more with the non-error slp1EnvMonADCStatus, and then stops being repeated.
NTF slp1TempHumidSensorStatusEvent	1.3.6.1.4.1.244.1.9.1.100.0.10			Temperature/humidity sensor status event. If enabled, this trap is sent when the slp1TempHumidSensorStatus indicates an error state ('lost'). This trap is repeated periodically while the slp1TempHumidSensorStatus remains in an error state. If the slp1TempHumidSensorStatus returns to a non-error state ('found'), this trap is sent once more with the non-error slp1TempHumidSensorStatus, and then stops being repeated. While the slp1TempHumidSensorStatus indicates an error state, all temperature and humidity status traps are suppressed for the temperature/humudity sensor.
NTF slp1TempHumidSensorTempEvent	1.3.6.1.4.1.244.1.9.1.100.0.11			Temperature/humidity sensor temperature event. If enabled, this trap is sent when the slp1TempHumidSensorTempStatus indicates an error state ('tempLow' or 'tempHigh'). This trap is repeated periodically while the slp1TempHumidSensorTempStatus remains in an error state. If the slp1TempHumidSensorTempStatus returns to a non-error state ('normal'), this trap is sent once more with the non-error slp1TempHumidSensorTempStatus, and then stops being repeated.
NTF slp1TempHumidSensorHumidEvent	1.3.6.1.4.1.244.1.9.1.100.0.12			Temperature/humidity sensor humidity event. If enabled, this trap is sent when the slp1TempHumidSensorHumidStatus indicates an error state ('humidLow' or 'humidHigh'). This trap is repeated periodically while the slp1TempHumidSensorHumidStatus remains in an error state. If the slp1TempHumidSensorHumidStatus returns to a non-error state ('normal'), this trap is sent once more with the non-error slp1TempHumidSensorHumidStatus, and then stops being repeated.
NTF slp1ContactClosureEvent	1.3.6.1.4.1.244.1.9.1.100.0.13			Contact closure event. If enabled, this trap is sent when the slp1ContactClosureStatus indicates an error state ('alarm'). This trap is repeated periodically while the slp1ContactClosureStatus remains in an error state. If the slp1ContactClosureStatus returns to a non-error state ('normal'), this trap is sent once more with the non-error slp1ContactClosureStatus, and then stops being repeated.

RFC description

Monitors Lantronix SecureLinx Power Manager system status, firmware, and environmental sensors.

Start monitoring Lantronix smart PDUs/power strips with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SLP1-MIB

What Is SLP1-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description