SLE-NETWORK-MIB :: sleTunnelIfControlRemoteAddress

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › SLE-NETWORK-MIB › sleTunnelIfControlRemoteAddress

sleTunnelIfControlRemoteAddress

Module: SLE-NETWORK-MIB

OID (symbolic): SLE-NETWORK-MIB::sleTunnelIfControlRemoteAddress

OID (numeric): 1.3.6.1.4.1.6296.101.11.8.2.8

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header), or 0.0.0.0 if unknown.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6296.101.11.8.2.8
snmpwalk -v2c -c public <target> SLE-NETWORK-MIB::sleTunnelIfControlRemoteAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6296.101.11.8.2.8.1
snmpget -v2c -c public <target> SLE-NETWORK-MIB::sleTunnelIfControlRemoteAddress.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6296.101.11.8.2.8.1 a <value>

Start monitoring Hanasoft SLE-series GPON/EPON Optical Line Terminal (IP interface/static route/DHCP configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SLE-NETWORK-MIB::sleTunnelIfControlRemoteAddress OID value, configure state conditions and alerts, and monitor any Hanasoft SLE-series GPON/EPON Optical Line Terminal (IP interface/static route/DHCP configuration) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6296dasanDASAN-DHCP-MIB
1.3.6.1.4.1.6296.101sleMgmtDASAN-SMI
Numeric OIDNameModule
1.3.6.1.4.1.6296.101.11sleNetworkSLE-NETWORK-MIB
1.3.6.1.4.1.6296.101.11.8sleTunnelSLE-NETWORK-MIB
1.3.6.1.4.1.6296.101.11.8.2sleTunnelIfControlSLE-NETWORK-MIB
1.3.6.1.4.1.6296.101.11.8.2.8sleTunnelIfControlRemoteAddressSLE-NETWORK-MIB