All MIBs › SL-SFP-MIB › sfpDiagAlarmsMask
sfpDiagAlarmsMask
Module: SL-SFP-MIB
OID (symbolic): SL-SFP-MIB::sfpDiagAlarmsMask
OID (numeric): 1.3.6.1.4.1.4515.1.10.2.1.1.43
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object indicates the Masking of the Alarms of the SFP module. The sfpDiagAlarmsMask is a bit map. Any of the alarm and warning flags can be masked by writing a 1 to the corresponding bits. The various bit positions are: 0 Temp High Wanring Set when internal temperature exceeds high warning level. 1 Temp Low Wanring Set when internal temperature is below low warning level. 2 Vcc High Wanring Set when internal supply voltage exceeds high warning level. 3 Vcc Low Wanring Set when internal supply voltage is below low warning level. 4 TX Bias High Wanring Set when TX Bias current exceeds high warning level. 5 TX Bias Low Wanring Set when TX Bias current is below low warning level. 6 TX Power High Wanring Set when TX output power exceeds high warning level. 7 TX Power Low Wanring Set when TX output power is below low warning level. 8 RX Power High Wanring Set when Received Power exceeds high warning level. 9 RX Power Low Wanring Set when Received Power is below low warning level. 10 (15xy) Laser T/W High Wanring Set when laser temperature or wavelength exceeds high warning level. 11 (15xy) Laser T/W Low Wanring Set when laser temperature or wavelength is below low warning level. 12 (15xy) TEC Current High Wanring Set when TEC current exceeds high warning level. 13 (15xy) TEC Current Low Wanring Set when TEC current is below low warning level.
What is sfpDiagAlarmsMask?
A bitmap letting an admin suppress specific alarm/warning conditions by writing a 1 to the corresponding bit, so noisy or irrelevant conditions (e.g. on a module type that doesn't support a given measurement) don't generate unwanted alerts.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4515.1.10.2.1.1.43 snmpwalk -v2c -c public <target> SL-SFP-MIB::sfpDiagAlarmsMask
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4515.1.10.2.1.1.43.1 snmpget -v2c -c public <target> SL-SFP-MIB::sfpDiagAlarmsMask.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4515.1.10.2.1.1.43.1 i <value>
Start monitoring SmartOptics SiteLight optical transport platform, SFP transceiver module (digital diagnostics/compliance status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SL-SFP-MIB::sfpDiagAlarmsMask OID value, configure state conditions and alerts, and monitor any SmartOptics SiteLight optical transport platform, SFP transceiver module (digital diagnostics/compliance status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4515 | smartoptics | SL-NE-MIB |
| 1.3.6.1.4.1.4515.1 | sitelight | SL-NE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4515.1.10 | slSfp | SL-SFP-MIB |
| 1.3.6.1.4.1.4515.1.10.2 | sfpDiag | SL-SFP-MIB |
| 1.3.6.1.4.1.4515.1.10.2.1 | sfpDiagTable | SL-SFP-MIB |
| 1.3.6.1.4.1.4515.1.10.2.1.1 | sfpDiagEntry | SL-SFP-MIB |
| 1.3.6.1.4.1.4515.1.10.2.1.1.43 | sfpDiagAlarmsMask | SL-SFP-MIB |