All MIBs › SL-SFP-MIB › sfpConfigExtendedOptions
sfpConfigExtendedOptions
Module: SL-SFP-MIB
OID (symbolic): SL-SFP-MIB::sfpConfigExtendedOptions
OID (numeric): 1.3.6.1.4.1.4515.1.10.1.1.1.28
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Specify the bitmap options implemented in the transceiver as described in. The bits definition is: 5 RATE_SELECT is implemented NOTE: Lack of implemention does not indicate lack of simultaneous compliance with multiple standard rates. Compliance with particular standards should be determined from Transceiver Code. 4 TX_DISABLE is implemented and disables the serial output. 3 TX_FAULT signal implemented. (See SFP MSA) 2 Loss of Signal implemented, signal inverted from standard definition in SFP MSA. NOTE: This is not standard SFP/GBIC behavior and should be avoided, since non-interoperable behavior results. 1 Loss of Signal implemented, signal as defined in SFP MSA.
What is sfpConfigExtendedOptions?
A bitmap of optional hardware signals/features implemented on this transceiver: RATE_SELECT support, TX_DISABLE, TX_FAULT, and one of two (mutually discouraged, non-interoperable) Loss-of-Signal signal polarities; useful for confirming a module actually supports a control pin before relying on it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4515.1.10.1.1.1.28 snmpwalk -v2c -c public <target> SL-SFP-MIB::sfpConfigExtendedOptions
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4515.1.10.1.1.1.28.1 snmpget -v2c -c public <target> SL-SFP-MIB::sfpConfigExtendedOptions.1
Start monitoring SmartOptics SiteLight optical transport platform, SFP transceiver module (digital diagnostics/compliance status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SL-SFP-MIB::sfpConfigExtendedOptions OID value, configure state conditions and alerts, and monitor any SmartOptics SiteLight optical transport platform, SFP transceiver module (digital diagnostics/compliance status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4515 | smartoptics | SL-NE-MIB |
| 1.3.6.1.4.1.4515.1 | sitelight | SL-NE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4515.1.10 | slSfp | SL-SFP-MIB |
| 1.3.6.1.4.1.4515.1.10.1 | sfpConf | SL-SFP-MIB |
| 1.3.6.1.4.1.4515.1.10.1.1 | sfpConfigTable | SL-SFP-MIB |
| 1.3.6.1.4.1.4515.1.10.1.1.1 | sfpConfigEntry | SL-SFP-MIB |
| 1.3.6.1.4.1.4515.1.10.1.1.1.28 | sfpConfigExtendedOptions | SL-SFP-MIB |