SIEMENS-VV-MIB

All MIBs › SIEMENS-VV-MIB

Category: RAID and Storage Management, Siemens Enterprise

Description: Manages Siemens virtual volume configuration, capacity allocation, and storage pool mapping.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SIEMENS-VV-MIB?

SIEMENS-VV-MIB is a Siemens enterprise MIB for managing "virtual volumes" in storage systems, covering capacity allocation, storage pool mapping, and component definitions for virtualized storage resources. It exposes agent identity/version objects (sieVvAgentId, sieVvAgentCompany, sieVvAgentVersion, sieVvAgentBuild) alongside scan-state and scan-timestamp objects (sieVvLastDate, sieVvLastScan, sieVvScanState) and a component-definition table (sieVvCompDefTable/sieVvCompDef) describing storage component types. For hardware/software status monitoring, the agent version/build objects support software-version tracking of the management agent itself, while sieVvScanState and sieVvLastScan let an administrator confirm the storage virtualization layer's discovery/inventory scan completed successfully and when it last ran. It sits under the sni (Siemens) enterprise OID branch alongside other sniProductMibs/sniExtensions modules, indicating it is part of a broader family of Siemens storage/product MIBs rather than a standalone module. It is deployed on Siemens storage virtualization/SAN management systems where administrators need to verify virtual volume inventory and component configuration. Engineers can download the SIEMENS-VV-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SIEMENS-VV-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Siemens storage systems/SAN virtualization platforms

Monitoring Examples

An administrator would check sieVvScanState and sieVvLastScan to confirm the storage virtualization agent's most recent inventory scan of virtual volumes completed successfully and to see how stale the data is. Walking sieVvCompDefTable by sieVvCompDefNo and sieVvCompDefType reveals which storage components are defined in the virtual volume configuration, useful for detecting an unexpected or missing component definition after a storage change. sieVvAgentVersion and sieVvAgentBuild can be polled to confirm which agent software version is running before troubleshooting a discrepancy.

What Can Be Monitored

virtual volume scan status
last scan timestamp
component definitions and types
management agent version/build

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge
TimeTicks
enterprises

From RFC1213-MIB

DisplayString
mib-2

OIDs

OID symbolic	OID numeric	Type	Access	Description
sni	1.3.6.1.4.1.231
sniProductMibs	1.3.6.1.4.1.231.2
sniExtensions	1.3.6.1.4.1.231.2.10
sniServerMgmt	1.3.6.1.4.1.231.2.10.2
sieVersionView	1.3.6.1.4.1.231.2.10.2.10
sieVvAgentInfo	1.3.6.1.4.1.231.2.10.2.10.1
STR sieVvAgentId	1.3.6.1.4.1.231.2.10.2.10.1.1	DisplayString	read-only	VersionView SNMP agent ID string
STR sieVvAgentCompany	1.3.6.1.4.1.231.2.10.2.10.1.2	DisplayString	read-only	VersionView SNMP agent company string
STR sieVvAgentVersion	1.3.6.1.4.1.231.2.10.2.10.1.3	DisplayString	read-only	VersionView SNMP agent version string
STR sieVvAgentBuild	1.3.6.1.4.1.231.2.10.2.10.1.4	DisplayString	read-only	VersionView SNMP agent build date and time string
sieVvState	1.3.6.1.4.1.231.2.10.2.10.2
INT sieVvLastDate	1.3.6.1.4.1.231.2.10.2.10.2.1	INTEGER	read-only	Date of actual collection of data in time_t (seconds since 1.1.70 00:00:00)
INT sieVvLastScan	1.3.6.1.4.1.231.2.10.2.10.2.2	INTEGER	read-only	Date of last scanning cycle in time_t (seconds since 1.1.70 00:00:00)
INT sieVvScanState	1.3.6.1.4.1.231.2.10.2.10.2.3	INTEGER	read-only	actual scanning state
sieVvDef	1.3.6.1.4.1.231.2.10.2.10.3
sieVvCompDefTable	1.3.6.1.4.1.231.2.10.2.10.3.1		not-accessible	Table of available Component Type Definitions
sieVvCompDef	1.3.6.1.4.1.231.2.10.2.10.3.1.1		not-accessible	Entry in Table of Component Type Definitions
INT sieVvCompDefNo	1.3.6.1.4.1.231.2.10.2.10.3.1.1.1	INTEGER	read-only	Number of Table Entry: A unique value for each component definition. Its value starts at 1 and must remain constant at least from one re-initialization of the SNMP agent to the next reinitialization.
INT sieVvCompDefType	1.3.6.1.4.1.231.2.10.2.10.3.1.1.2	INTEGER	read-only	Type of Component from Master DB. The details are defined in the document: VersionView MIB Supplementary. Declaration is found in the file VersionView.ini
STR sieVvCompDefName	1.3.6.1.4.1.231.2.10.2.10.3.1.1.3	DisplayString	read-only	Name of Component. The details are defined in the document: VersionView MIB Supplementary. Declaration is found in the file VersionView.ini
sieVvPhysNodeDefTable	1.3.6.1.4.1.231.2.10.2.10.3.2		not-accessible	Table of node definitions that are used in the sieVvCont group
sieVvPhysNodeDef	1.3.6.1.4.1.231.2.10.2.10.3.2.1		not-accessible	Entry in Table of Physical Node Definitions
INT sieVvPhysNodeDefNo	1.3.6.1.4.1.231.2.10.2.10.3.2.1.1	INTEGER	read-only	Number of Table Entry: A unique value for each physical container definition. Its value starts at 1 and must remain constant at least from one re-initialization of the SNMP agent to the next reinitialization.
INT sieVvPhysNodeDefType	1.3.6.1.4.1.231.2.10.2.10.3.2.1.2	INTEGER	read-only	Type of node in the physical tree. The details are defined in the document: VersionView MIB Supplementary.
STR sieVvPhysNodeDefName	1.3.6.1.4.1.231.2.10.2.10.3.2.1.3	DisplayString	read-only	Name of node in the physical tree. The details are defined in the document: VersionView MIB Supplementary.
sieVvFuncNodeDefTable	1.3.6.1.4.1.231.2.10.2.10.3.3		not-accessible	Table of node definitions that are used in the sieVvCont group
sieVvFuncNodeDef	1.3.6.1.4.1.231.2.10.2.10.3.3.1		not-accessible	Entry in Table of Functional Node Definitions
INT sieVvFuncNodeDefNo	1.3.6.1.4.1.231.2.10.2.10.3.3.1.1	INTEGER	read-only	Number of Table Entry: A unique value for each functional container definition. Its value starts at 1 and must remain constant at least from one re-initialization of the SNMP agent to the next reinitialization.
INT sieVvFuncNodeDefType	1.3.6.1.4.1.231.2.10.2.10.3.3.1.2	INTEGER	read-only	Type of node in the functional tree. The details are defined in the document: VersionView MIB Supplementary.
STR sieVvFuncNodeDefName	1.3.6.1.4.1.231.2.10.2.10.3.3.1.3	DisplayString	read-only	Name of node in the functional tree. The details are defined in the document: VersionView MIB Supplementary.
sieVvCont	1.3.6.1.4.1.231.2.10.2.10.4
sieVvPhysContTable	1.3.6.1.4.1.231.2.10.2.10.4.1		not-accessible	Table of expressing the hierarchy of Physical Containers for Components
sieVvPhysCont	1.3.6.1.4.1.231.2.10.2.10.4.1.1		not-accessible	Entry in Table of Physical Containers
INT sieVvPhysContNo	1.3.6.1.4.1.231.2.10.2.10.4.1.1.1	INTEGER	read-only	Number of Table Entry A unique value for each physical container. Its value starts at 1. The value for each container may change during an update of the MIB data, i.e. at the date specified in sieVvLastDate.
INT sieVvPhysContType	1.3.6.1.4.1.231.2.10.2.10.4.1.1.2	INTEGER	read-only	Type of Physical Container. This value is the value of sieVvPhysNodeDefNo of the corresponding entry in the table of Physical Container Definitions.
INT sieVvPhysContParent	1.3.6.1.4.1.231.2.10.2.10.4.1.1.3	INTEGER	read-only	Value of sieVvPhysContNo for the entry which describes the parent container. The value 0 indicates that there is no parent container, i.e. it is the root.
STR sieVvPhysContName	1.3.6.1.4.1.231.2.10.2.10.4.1.1.4	DisplayString	read-only	Name of node in the physical tree, corresponding to Type of Physical Container. The details are defined in the document: VersionView MIB Supplementary. (Added for debug purpose)
sieVvFuncContTable	1.3.6.1.4.1.231.2.10.2.10.4.2		not-accessible	Table of available Components
sieVvFuncCont	1.3.6.1.4.1.231.2.10.2.10.4.2.1		not-accessible	Entry in Table of Functional Containers
INT sieVvFuncContNo	1.3.6.1.4.1.231.2.10.2.10.4.2.1.1	INTEGER	read-only	Number of Table Entry: A unique value for each functional container. Its value starts at 1. The value for each container may change during an update of the MIB data, i.e. at the date specified in sieVvLastDate.
INT sieVvFuncContType	1.3.6.1.4.1.231.2.10.2.10.4.2.1.2	INTEGER	read-only	Type of Functional Container. This value is the value of sieVvFuncNodeDefNo of the corresponding entry in the table of Functional Container Definitions.
INT sieVvFuncContParent	1.3.6.1.4.1.231.2.10.2.10.4.2.1.3	INTEGER	read-only	Value of sieVvFuncContNo for the entry which describes the parent container. The value 0 indicates that there is no parent container, i.e. it is the root.
STR sieVvFuncContName	1.3.6.1.4.1.231.2.10.2.10.4.2.1.4	DisplayString	read-only	Name of node in the functional tree, corresponding to Type of Functional Container. The details are defined in the document: VersionView MIB Supplementary. (Added for debug purpose)
sieVvInfos	1.3.6.1.4.1.231.2.10.2.10.5
sieVvInfoTable	1.3.6.1.4.1.231.2.10.2.10.5.1		not-accessible	Table of available Components
sieVvInfo	1.3.6.1.4.1.231.2.10.2.10.5.1.1		not-accessible	Entry in Table of Components
INT sieVvInfoNo	1.3.6.1.4.1.231.2.10.2.10.5.1.1.1	INTEGER	read-only	Number of Table Entry: A unique value for each component. Its value starts at 1. The value for each component may change during an update of the MIB data, i.e. at the date specified in sieVvLastDate.
INT sieVvInfoPhysContNo	1.3.6.1.4.1.231.2.10.2.10.5.1.1.2	INTEGER	read-only	Value of sieVvPhysContNo for the entry which describes the parent container. The value 0 indicates that there is no parent container. For example, software or firmware components are in no physical containers.
INT sieVvInfoFuncContNo	1.3.6.1.4.1.231.2.10.2.10.5.1.1.3	INTEGER	read-only	Value of sieVvFuncContNo for the entry which describes the functional parent container.
INT sieVvInfoCompType	1.3.6.1.4.1.231.2.10.2.10.5.1.1.4	INTEGER	read-only	Component type: This value is the value of sieVvCompDefNo of the corresponding entry in the table of Component Definitions.
STR sieVvInfoVendor	1.3.6.1.4.1.231.2.10.2.10.5.1.1.5	DisplayString	read-only	Component Vendor
STR sieVvInfoProductName	1.3.6.1.4.1.231.2.10.2.10.5.1.1.6	DisplayString	read-only	Product Name of Component Software: (e.g. Driver) File Name (e.g. abcd.sys) HW: Component Name (e.g. DAC960xx, D981)
STR sieVvInfoProductNumber	1.3.6.1.4.1.231.2.10.2.10.5.1.1.7	DisplayString	read-only	Product Number of Component e.g. S26361 D981
STR sieVvInfoProductDescription	1.3.6.1.4.1.231.2.10.2.10.5.1.1.8	DisplayString	read-only	Description of Component e.g. SCSI Miniport Driver, CD-ROM IDE Device
STR sieVvInfoVersion	1.3.6.1.4.1.231.2.10.2.10.5.1.1.9	DisplayString	read-only	Version Number of Component e.g. for Driver: FileVersion//ProductVersion//InternalName//OperatingSystem e.g. for HW: V2 GS1 or Version x.y Revision a.b
STR sieVvInfoManufacturingDate	1.3.6.1.4.1.231.2.10.2.10.5.1.1.10	DisplayString	read-only	Manufacturing Date of Component in the form YYYY-MM-DD hh:mm:ss e.g. for Software: Date of last change
STR sieVvInfoSerialNo	1.3.6.1.4.1.231.2.10.2.10.5.1.1.11	DisplayString	read-only	Serial Number of Component
STR sieVvInfoLanguage	1.3.6.1.4.1.231.2.10.2.10.5.1.1.12	DisplayString	read-only	Supported Language of Component as defined in ISO 639/ISO 3166 (ISO 639 LanguageName//ISO 3166 Territory Name) e.g. en//US
STR sieVvInfoComponentId	1.3.6.1.4.1.231.2.10.2.10.5.1.1.13	DisplayString	read-only	Identification String for Component e.g. \VEN_110A&DEV_0013&SUBSYS_0013110A&REV_01 Bus PCI, EISA, USB,... VEN_vvvv VendorID from PCI-ConfigSpace DEV_dddd DeviceID from PCI-ConfigSpace SUBSYS_sdsdsvsv SubDeviceID/SubVendorID from PCI-ConfigSpace REV_rr Revision from PCI-ConfigSpace the entries SUBSYS_sdsdsvsv and REV_rr are optional
STR sieVvInfoCompLocationKey	1.3.6.1.4.1.231.2.10.2.10.5.1.1.14	DisplayString	read-only	Device location key, used for identifying the component; e.g. 'TYPE_PCI&BUS_3&DEV_14&FUNC_0'
sieVvFwuObjects	1.3.6.1.4.1.231.2.10.2.10.6
sieVvFwuObjectTable	1.3.6.1.4.1.231.2.10.2.10.6.1		not-accessible	Table of objects having updatable firmware.
sieVvFwuObject	1.3.6.1.4.1.231.2.10.2.10.6.1.1		not-accessible	Entry in Table of Firmware Update Objects
INT sieVvFwuObjectNo	1.3.6.1.4.1.231.2.10.2.10.6.1.1.1	INTEGER	read-only	Number of Table Entry: A unique value for each update object. Its value starts at 1. The value for each object may change during an update of the MIB data, i.e. at the date specified in sieVvLastDate.
STR sieVvFwuObjectName	1.3.6.1.4.1.231.2.10.2.10.6.1.1.2	DisplayString	read-only	Unique name to identify the updatable object within the server system: NT device name, with an extension in some cases such as a physical disk within a RAID array.
STR sieVvFwuObjectPath	1.3.6.1.4.1.231.2.10.2.10.6.1.1.3	DisplayString	read-only	Pathname to indicate more precisely the logical position of the object within the server system: e.g. bus path (including for example PCI bridge), SCSI target ID., etc.
STR sieVvFwuObjectParent	1.3.6.1.4.1.231.2.10.2.10.6.1.1.4	DisplayString	read-only	In some cases an object hierarchy has to be established for the purpose of updating firmware, e.g. a RAID controller which contains a physical disk, acting as a passthrough controller to that disk.
INT sieVvFwuObjectUpdateState	1.3.6.1.4.1.231.2.10.2.10.6.1.1.5	INTEGER	read-only	Specifies the state of this object with regard to update: 0 = normal, default state, 1 = cannot update now, e.g. a RAID rebuild is running, 2 = in the process of updating, 3 = error, update could not be completed successfully. 4 = update OK, but needs a reboot to become active, 5 = update OK, but needs a reset to become active.
INT sieVvFwuObjectComponentIndex	1.3.6.1.4.1.231.2.10.2.10.6.1.1.6	INTEGER	read-only	Value of sieVvInfoNo for the entry which describes the updatable object in the table of component information.

RFC description

Fujitsu Siemens Computers Version View agent information MIB for server management and firmware updates.

Start monitoring Siemens storage systems/SAN virtualization platforms (virtual-volume inventory/scan status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SIEMENS-VV-MIB

What Is SIEMENS-VV-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description