SIAE-CLOG-MIB

All MIBs › SIAE-CLOG-MIB

Organization: SIAE MICROELETTRONICA spa

Last Updated: 2015-03-23

Category: Microwave Radio - SIAE MICROELETTRONICA

Description: Tracks SIAE MICROELETTRONICA microwave radio configuration change log entries and audit history.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SIAE-CLOG-MIB?

SIAE-CLOG-MIB is a proprietary module from SIAE MICROELETTRONICA, an Italian microwave radio transmission equipment vendor, and it implements a configuration change log (audit trail) for the device. It records commands entered through any management interface -- SNMP, CLI, or the web GUI -- so its data category is configuration/audit history rather than live performance data. Its monitoring value is in software status and change tracking: an operator can review the log to see what configuration commands were issued, by which interface, and when, which is essential for diagnosing a misconfiguration or unauthorized change on a microwave radio link. It is a self-contained vendor MIB that works alongside SIAE's broader radio management MIB suite (e.g. unit and alarm MIBs) rather than depending on external IETF standards. It is deployed on SIAE microwave radio equipment used in telecom backhaul networks, where configuration audit trails support both troubleshooting and compliance. Engineers can download the SIAE-CLOG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SIAE-CLOG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

SIAE MICROELETTRONICA microwave radio equipment

Monitoring Examples

An administrator investigating an unexpected radio link parameter change would query the change log table to see the sequence of recent commands, the originating interface (SNMP/CLI/WEB), and timestamps, effectively reconstructing who changed what and when. If a log entry shows a modulation or power setting was altered outside a maintenance window, that immediately narrows the root cause of a subsequent link quality drop. This audit trail is often cross-referenced with SIAE-UNIT-MIB status objects to correlate a config change with a resulting alarm.

What Can Be Monitored

configuration change log entries
command source (SNMP/CLI/WEB)
change timestamps
audit history of configuration commands

Imported Objects

From SIAE-ALARM-MIB

alarmTrap

OBJECT-IDENTITY

From SIAE-EQUIP-MIB

equipIpSnmpAgentAddress

OBJECT-TYPE

From SIAE-TREE-MIB

siaeMib

OBJECT-IDENTITY

From SIAE-USER-MIB

accessControlLoginIpAddress

OBJECT-TYPE

From SNMPv2-SMI

MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF commandLogFtpStatusTrap	1.3.6.1.4.1.3373.1103.0.4001			This event is generated when the status of FTP transfer is changed. The data passed with the event are: 1) equipIpSnmpAgentAddress 2) commandLogFtpStatus 3) accessControlLoginIpAddress
commandLog	1.3.6.1.4.1.3373.1103.40			Recorder of the commands entered from SNMP/CLI/WEB
INT commandLogMibVersion	1.3.6.1.4.1.3373.1103.40.1	INTEGER	read-only	Numerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.00.01 and the value 10001 should be interpreted as 01.00.01.
INT commandLogActionRequest	1.3.6.1.4.1.3373.1103.40.2	INTEGER	read-write	This leaf is used to delete record or to read it by FTP.
STR commandLogFtpFile	1.3.6.1.4.1.3373.1103.40.3	DisplayString	read-write	This leaf is reserved to file path where to transfer data.
BIT commandLogMgmtInterfaceFilter	1.3.6.1.4.1.3373.1103.40.4	Bits	read-write	Select which items are to be read or deleted according to interface used to enter the registered command. Bits set to 1 select the relative interface, bits set to 0 filter the relative interface
U32 commandLogStartTimeFilter	1.3.6.1.4.1.3373.1103.40.5	Unsigned32	read-write	The events with EventTime greater than this object are read/delete from the log. Null value means no filter.
U32 commandLogEndTimeFilter	1.3.6.1.4.1.3373.1103.40.6	Unsigned32	read-write	The events with EventTime less than this object are read/delete from the log. Null value means no filter.
STR commandLogUserNameFilter	1.3.6.1.4.1.3373.1103.40.7	DisplayString	read-write	Name of the user that sent the request for the filter to manage commands in the record. ** value means no filter.
STR commandLogSourceAddressFilter	1.3.6.1.4.1.3373.1103.40.8	DisplayString	read-write	IP address of source machine of filter to manage commands in the record. 0 value means no filter.
INT commandLogFtpStatus	1.3.6.1.4.1.3373.1103.40.9	INTEGER	read-only	This leaf is used for the status of transfer.
INT commandLogFtpStatusTrapNotification	1.3.6.1.4.1.3373.1103.40.10	INTEGER	read-write	Enables/disables the trap generation on FTP tranfer operation.
U32 commandLogLastCommandTime	1.3.6.1.4.1.3373.1103.40.11	Unsigned32	read-only	Describes the time, in seconds since 01/01/1970, of the last SNMP command. The commands saves must be from a LOM. Some type of commands, as login action or timestamp set, are skipped.
STR commandLogLastCommandUser	1.3.6.1.4.1.3373.1103.40.12	DisplayString	read-only	Describes the user that have made of the last SNMP command. The commands saves must be from a LOM. Some type of commands, as login action or timestamp set, are skipped.

RFC description

Records and monitors command logs from SNMP, CLI, and web interfaces on SIAE network equipment.

Start monitoring SIAE Microelettronica microwave radios with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SIAE-CLOG-MIB

What Is SIAE-CLOG-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description