All MIBs › SIAE-CFGM-MIB › configManagementAction
configManagementAction
Module: SIAE-CFGM-MIB
OID (symbolic): SIAE-CFGM-MIB::configManagementAction
OID (numeric): 1.3.6.1.4.1.3373.1103.30.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Action requested to the equipment: - configNone: no action required; - configSave: the current equipment configuration will be saved in the file whose name is written in the leaf configurationFileName through FTP protocol; - configUse: the configuration file, whose name is written in the leaf configurationFileName, will be transfer- red on the target through FTP protocol and it will be used after an implicit restart of the equip- ment. A copy of the current equipment configuration will be saved on the equipment filesystem in order to return to it. - configBack: the equipment configuration, saved during a config-use action will be used after an implicit restart of the equipment. - configAbort: the action in progress will be interrupted.
- configBackAndSwich: the equipment configuration, saved during a config-use action will be used after an implicit bench switch of the equipment.
The value of this object is self cleared (reset to the value configNone) after its use.
What is configManagementAction?
This object triggers a configuration-management action on the equipment, selecting among options like configSave, configUse, configBack, configAbort, or configUseAndSwitch. Setting it to configSave saves the running configuration to the file named in configManagementFileName via FTP, while configUse transfers and applies a config file after an implicit restart, and the value self-clears back to configNone once the action completes. For example, an admin who has staged a new config file would set this object to configUse(2) to push and activate it, then later set configBack(3) to revert to the previously saved configuration if the new one causes problems.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3373.1103.30.4 snmpwalk -v2c -c public <target> SIAE-CFGM-MIB::configManagementAction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3373.1103.30.4.1 snmpget -v2c -c public <target> SIAE-CFGM-MIB::configManagementAction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3373.1103.30.4.1 i <value>
Start monitoring SIAE MICROELETTRONICA microwave radio network elements (configuration backup/restore status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SIAE-CFGM-MIB::configManagementAction OID value, configure state conditions and alerts, and monitor any SIAE MICROELETTRONICA microwave radio network elements (configuration backup/restore status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3373 | siaeMicroelettronicaSpa | SIAE-TREE-MIB |
| 1.3.6.1.4.1.3373.1103 | siaeMib | SIAE-TREE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3373.1103.30 | configManagement | SIAE-CFGM-MIB |
| 1.3.6.1.4.1.3373.1103.30.4 | configManagementAction | SIAE-CFGM-MIB |