All MIBs › SENAO-EOR7550-MIB › entRouterEnable
entRouterEnable
Module: SENAO-EOR7550-MIB
OID (symbolic): SENAO-EOR7550-MIB::entRouterEnable
OID (numeric): 1.3.6.1.4.1.14125.101.3.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Only When op mode is 0(AP) or (Client bridge), can set this attribute. Set TUUE will enable the router.
What is entRouterEnable?
Set TRUE to enable NAT/routing on the device; only settable when the operating mode is AP(0) or Client bridge, since other modes bridge traffic rather than route it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.14125.101.3.1 snmpwalk -v2c -c public <target> SENAO-EOR7550-MIB::entRouterEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.14125.101.3.1.1 snmpget -v2c -c public <target> SENAO-EOR7550-MIB::entRouterEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.14125.101.3.1.1 s <value>
Start monitoring Senao/Sendfar EOR7550 wireless router (LAN/WAN/WLAN interface and MAC-filter status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SENAO-EOR7550-MIB::entRouterEnable OID value, configure state conditions and alerts, and monitor any Senao/Sendfar EOR7550 wireless router (LAN/WAN/WLAN interface and MAC-filter status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.14125 | engenius | ENGENIUS-CLIENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.14125.101 | eor7550 | SENAO-EOR7550-MIB |
| 1.3.6.1.4.1.14125.101.3 | entWAN | SENAO-EOR7550-MIB |
| 1.3.6.1.4.1.14125.101.3.1 | entRouterEnable | SENAO-EOR7550-MIB |