ZMTEL-ODU-MIB

All MIBs › ZMTEL-ODU-MIB

Organization: Zmtel Co. Ltd.

Last Updated: 2015-08-03

Description: Zmtel enterprise MIB for LTE outdoor units (ODU), exposing device identity, system, LTE radio, WAN, and LAN information on Zmtel ODU hardware

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZMTEL-ODU-MIB?

This is a Zmtel enterprise MIB for the company's LTE Outdoor Unit (ODU) product line, a fixed-wireless LTE customer-premises radio device typically mounted outdoors to provide cellular backhaul or last-mile broadband access. It exposes device identity information (vendor, product/model name, hardware and software/firmware versions, serial numbers, IMEI/IMSI), along with LTE radio parameters, WAN connectivity information, and LAN-side configuration. Its monitoring value is strongly hardware/software-status oriented: administrators use it to confirm the exact hardware and firmware/bootROM version running on the unit, verify the SIM/module identity via IMEI/IMSI, and check LTE radio and WAN link status to diagnose connectivity issues on the cellular link. It has no apparent dependency on external standards MIBs, functioning as a self-contained Zmtel proprietary identity/status model, though it would logically sit alongside standard IF-MIB objects for the unit's LAN interface. It is deployed on Zmtel outdoor LTE CPE units providing fixed-wireless broadband access in areas served by cellular backhaul rather than fixed-line infrastructure. Network engineers evaluating or troubleshooting this functionality can download the ZMTEL-ODU-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZMTEL-ODU-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Zmtel LTE Outdoor Unit (ODU) fixed-wireless CPE

Monitoring Examples

An administrator would poll deviceInfo/systemInfo objects such as modelName, hardwareVersion, softwareVersion, and firmwareVersion to confirm which firmware build is running on a given ODU before or after a remote upgrade, and check SN, moduleSN, IMEI, and IMSI to verify the correct SIM/module is installed in the field unit. Polling lteInfo objects like lteBand alongside general LTE radio status would reveal whether the unit is camped on the expected LTE band or has fallen back to a weaker signal band due to poor cellular coverage.

What Can Be Monitored

hardware/software/firmware version
serial number and module serial number
IMEI/IMSI identity
LTE band and radio status
WAN and LAN connection info

Imported Objects

From RFC1155-SMI

IpAddress
NetworkAddress

From SNMPv2-SMI

Counter64
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32
enterprises

From SNMPv2-TC

DisplayString

How to Use in IPNetwork Monitor

Example using dlDataRateCurrent OID:

Select a Zmtel LTE Outdoor Unit (ODU) fixed-wireless CPE (hardware/firmware-version, LTE-radio/WAN-link status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type dlDataRateCurrent into the Find box to locate it in the OID tree, then select it and click OK. Indicates the mobile network downlink current data rate(Bytes/s). On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
zmtel	1.3.6.1.4.1.38595			Zmtel MIB OID defines and documentation.
odu	1.3.6.1.4.1.38595.10			Zmtel odu MIB OID defines.
deviceInfo	1.3.6.1.4.1.38595.10.1
OCT vendor	1.3.6.1.4.1.38595.10.1.1	OCTET STRING	read-only	Indicates the device vendor.
OCT modelName	1.3.6.1.4.1.38595.10.1.3	OCTET STRING	read-only	Indicates the device model name.
OCT hardwareVersion	1.3.6.1.4.1.38595.10.1.4	OCTET STRING	read-only	Indicates the device hardware version.
OCT sN	1.3.6.1.4.1.38595.10.1.5	OCTET STRING	read-only	Indicates the device serial number.
OCT moduleSN	1.3.6.1.4.1.38595.10.1.6	OCTET STRING	read-only	Indicates the module serial number.
OCT softwareVersion	1.3.6.1.4.1.38595.10.1.7	OCTET STRING	read-only	Indicates the software version.
OCT firmwareVersion	1.3.6.1.4.1.38595.10.1.8	OCTET STRING	read-only	Indicates the firmware version.
OCT bootROM	1.3.6.1.4.1.38595.10.1.9	OCTET STRING	read-only	Indicates the bootROM version.
OCT iMEI	1.3.6.1.4.1.38595.10.1.10	OCTET STRING	read-only	Indicates device IMEI.
OCT iMSI	1.3.6.1.4.1.38595.10.1.11	OCTET STRING	read-only	Indicates USIM card IMSI.
OCT lteBand	1.3.6.1.4.1.38595.10.1.12	OCTET STRING	read-only	Indicates support LTE bands.
INT reboot	1.3.6.1.4.1.38595.10.1.13	INTEGER	read-write	Reboot the device.
INT reset	1.3.6.1.4.1.38595.10.1.14	INTEGER	read-write	Factory reset.
systemInfo	1.3.6.1.4.1.38595.10.2
U32 deviceUpTime	1.3.6.1.4.1.38595.10.2.1	Unsigned32	read-only	Indicates the seconds when device is up.
U32 cpuUsageCurrent	1.3.6.1.4.1.38595.10.2.2	Unsigned32	read-only	Indicates current cpu usage, such as 30%.
U32 cpuUsageMax	1.3.6.1.4.1.38595.10.2.3	Unsigned32	read-only	Indicates max cpu usage, such as 60%.
U32 cpuUsageMin	1.3.6.1.4.1.38595.10.2.4	Unsigned32	read-only	Indicates min cpu usage, such as 10%.
U32 memTotal	1.3.6.1.4.1.38595.10.2.5	Unsigned32	read-only	Indicates system total memory size, such as 37904 KB.
U32 memUsageCurrent	1.3.6.1.4.1.38595.10.2.6	Unsigned32	read-only	Indicates current memory usage, such as 81%.
U32 memUsageMax	1.3.6.1.4.1.38595.10.2.7	Unsigned32	read-only	Indicates max memory usage, such as 81%.
U32 memUsageMin	1.3.6.1.4.1.38595.10.2.8	Unsigned32	read-only	Indicates min memory usage, such as 69%.
INT firewall	1.3.6.1.4.1.38595.10.2.9	INTEGER	read-only	Indicates firewall status,disabled or enabled .
lteInfo	1.3.6.1.4.1.38595.10.3
U32 lteConnectionTime	1.3.6.1.4.1.38595.10.3.1	Unsigned32	read-only	Indicates the seconds when device is connected to the LTE mobile network.
OCT usimCardStatus	1.3.6.1.4.1.38595.10.3.2	OCTET STRING	read-only	Indicates the USIM Card status.
OCT lteNetworkStatus	1.3.6.1.4.1.38595.10.3.3	OCTET STRING	read-only	Indicates the LTE mobile network connection status.
OCT lteDuplexMode	1.3.6.1.4.1.38595.10.3.4	OCTET STRING	read-only	Indicates the lte mobile network duplex mode,TDD or FDD.
OCT operator	1.3.6.1.4.1.38595.10.3.5	OCTET STRING	read-only	Indicates the mobile network operator.
I32 dlMCS	1.3.6.1.4.1.38595.10.3.6	Integer32	read-only	Indicates the mobile network downlink MCS.
I32 ulMCS	1.3.6.1.4.1.38595.10.3.7	Integer32	read-only	Indicates the mobile network uplink MCS.
OCT dlFrequency	1.3.6.1.4.1.38595.10.3.8	OCTET STRING	read-only	Indicates the mobile network downlink frequency(KHz).
OCT ulFrequency	1.3.6.1.4.1.38595.10.3.9	OCTET STRING	read-only	Indicates the mobile network uplink frequency(KHz).
U32 bandwidth	1.3.6.1.4.1.38595.10.3.10	Unsigned32	read-only	Indicates the mobile network bandwidth(KHz).
I32 rsrp0	1.3.6.1.4.1.38595.10.3.11	Integer32	read-only	Indicates the mobile network RSRP0(dBm).
I32 rsrp1	1.3.6.1.4.1.38595.10.3.12	Integer32	read-only	Indicates the mobile network RSRP1(dBm).
I32 rsrq	1.3.6.1.4.1.38595.10.3.13	Integer32	read-only	Indicates the mobile network RSRQ(dB).
I32 rssi	1.3.6.1.4.1.38595.10.3.14	Integer32	read-only	Indicates the mobile network RSSI(dBm).
I32 sinr	1.3.6.1.4.1.38595.10.3.15	Integer32	read-only	Indicates the mobile network SINR(dB).
I32 cinr0	1.3.6.1.4.1.38595.10.3.16	Integer32	read-only	Indicates the mobile network CINR0(dB).
I32 cinr1	1.3.6.1.4.1.38595.10.3.17	Integer32	read-only	Indicates the mobile network CINR1(dB).
I32 txPower	1.3.6.1.4.1.38595.10.3.18	Integer32	read-only	Indicates the mobile network TX Power(dBm).
I32 pCID	1.3.6.1.4.1.38595.10.3.19	Integer32	read-only	Indicates the mobile network physical cell id.
I32 eNBID	1.3.6.1.4.1.38595.10.3.20	Integer32	read-only	Indicates the mobile network eNB id.
I32 cellID	1.3.6.1.4.1.38595.10.3.21	Integer32	read-only	Indicates the mobile network physical cell id of the detected cell.
I32 mCC	1.3.6.1.4.1.38595.10.3.22	Integer32	read-only	Indicates the mobile network MCC.
I32 mNC	1.3.6.1.4.1.38595.10.3.23	Integer32	read-only	Indicates the mobile network MNC.
C64 dlDataRateCurrentEx	1.3.6.1.4.1.38595.10.3.24	Counter64	read-only	Indicates the mobile network downlink current data rate(Bytes/s).
C64 dlDataRateMax	1.3.6.1.4.1.38595.10.3.25	Counter64	read-only	Indicates the mobile network downlink maximum data rate(Bytes/s).
C64 dlDataRateMin	1.3.6.1.4.1.38595.10.3.26	Counter64	read-only	Indicates the mobile network downlink minimum data rate(Bytes/s).
C64 ulDataRateCurrent	1.3.6.1.4.1.38595.10.3.27	Counter64	read-only	Indicates the mobile network uplink current data rate(Bytes/s).
C64 ulDataRateMax	1.3.6.1.4.1.38595.10.3.28	Counter64	read-only	Indicates the mobile network uplink maximum data rate(Bytes/s).
C64 ulDataRateMin	1.3.6.1.4.1.38595.10.3.29	Counter64	read-only	Indicates the mobile network uplink minimum data rate(Bytes/s).
apnTable	1.3.6.1.4.1.38595.10.3.30		not-accessible	Indicates all LTE APNs information.
apnEntry	1.3.6.1.4.1.38595.10.3.30.1		not-accessible	Entry contains information of APN.
U32 apnEntryIndex	1.3.6.1.4.1.38595.10.3.30.1.1	Unsigned32	not-accessible	APN index.
OCT apnName	1.3.6.1.4.1.38595.10.3.30.1.2	OCTET STRING	read-only	APN name.
INT apnStatus	1.3.6.1.4.1.38595.10.3.30.1.3	INTEGER	read-only	Indicates an APN status,disabled or enabled.
IP apnIpAddress	1.3.6.1.4.1.38595.10.3.30.1.4	IpAddress	read-only	APN ip address.
IP apnSubnetMask	1.3.6.1.4.1.38595.10.3.30.1.5	IpAddress	read-only	APN subnet mask.
C64 apnRxTotalTraffic	1.3.6.1.4.1.38595.10.3.30.1.6	Counter64	read-only	Indicates an APN Rx total traffic(Bytes).
C64 apnRxPackets	1.3.6.1.4.1.38595.10.3.30.1.7	Counter64	read-only	Indicates an APN Rx(Receive) packets number.
C64 apnRxErrorPackets	1.3.6.1.4.1.38595.10.3.30.1.8	Counter64	read-only	Indicates an APN Rx(Receive) error packets number.
C64 apnRxDroppedPackets	1.3.6.1.4.1.38595.10.3.30.1.9	Counter64	read-only	Indicates an APN Rx(Receive) dropped packets number.
C64 apnTxTotalTraffic	1.3.6.1.4.1.38595.10.3.30.1.10	Counter64	read-only	Indicates an APN Tx(Send) total traffic.
C64 apnTxPackets	1.3.6.1.4.1.38595.10.3.30.1.11	Counter64	read-only	Indicates an APN Tx(Send) packets number.
C64 apnTxErrorPackets	1.3.6.1.4.1.38595.10.3.30.1.12	Counter64	read-only	Indicates an APN Tx(Send) error packets number.
C64 apnTxDroppedPackets	1.3.6.1.4.1.38595.10.3.30.1.13	Counter64	read-only	Indicates an APN Tx(Send) dropped packets number.
C64 ulEARFCN	1.3.6.1.4.1.38595.10.3.31	Counter64	read-only	Indicates the uplink EARFCN.
C64 dlEARFCN	1.3.6.1.4.1.38595.10.3.32	Counter64	read-only	Indicates the downlink EARFCN.
wanInfo	1.3.6.1.4.1.38595.10.4
INT wanMode	1.3.6.1.4.1.38595.10.4.1	INTEGER	read-only	Indicates WAN mode, NAT/Router/Bridge.
INT wanType	1.3.6.1.4.1.38595.10.4.2	INTEGER	read-only	Indicates WAN type, DHCP/Static.
OCT wanDnsServer	1.3.6.1.4.1.38595.10.4.3	OCTET STRING	read-only	Indicates WAN dns server ip address,such as 213.172.33.34.
OCT wanTimeServer	1.3.6.1.4.1.38595.10.4.4	OCTET STRING	read-only	Indicates WAN time server ip address(NTP Server IP Address),such as 213.172.43.4.
lanInfo	1.3.6.1.4.1.38595.10.5
INT lanType	1.3.6.1.4.1.38595.10.5.1	INTEGER	read-only	Indicates LAN type,DHCP/Static.
OCT lanMacAddress	1.3.6.1.4.1.38595.10.5.2	OCTET STRING	read-only	Indicates LAN mac address,such as '00:12:61:00:85:DB'.
IP lanIpAddress	1.3.6.1.4.1.38595.10.5.3	IpAddress	read-only	Indicates LAN ip address,such as '192.168.1.1'.
IP lanSubnetMask	1.3.6.1.4.1.38595.10.5.4	IpAddress	read-only	Indicates LAN subnet mask,such as '255.255.255.0'.
C64 lanRxTotalTraffic	1.3.6.1.4.1.38595.10.5.5	Counter64	read-only	Indicates LAN Rx(Receive) total traffic(Bytes).
C64 lanRxPackets	1.3.6.1.4.1.38595.10.5.6	Counter64	read-only	Indicates LAN Rx(Receive) packets number.
C64 lanRxErrorPackets	1.3.6.1.4.1.38595.10.5.7	Counter64	read-only	Indicates LAN Rx(Receive) error packets number.
C64 lanRxDroppedPackets	1.3.6.1.4.1.38595.10.5.8	Counter64	read-only	Indicates LAN Rx(Receive) dropped packets number.
C64 lanTxTotalTraffic	1.3.6.1.4.1.38595.10.5.9	Counter64	read-only	Indicates LAN Tx(Send) total traffic.
C64 lanTxPackets	1.3.6.1.4.1.38595.10.5.10	Counter64	read-only	Indicates LAN Tx(Send) packets number.
C64 lanTxErrorPackets	1.3.6.1.4.1.38595.10.5.11	Counter64	read-only	Indicates LAN Tx(Send) error packets number.
C64 lanTxDroppedPackets	1.3.6.1.4.1.38595.10.5.12	Counter64	read-only	Indicates LAN Tx(Send) dropped packets number.

RFC description

MIB for Zmtel LTE ODU (Outdoor Unit) devices defining device information, system status, and network interface monitoring.

Start monitoring Zmtel LTE Outdoor Unit (ODU) fixed-wireless CPE (hardware/firmware-version, LTE-radio/WAN-link status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZMTEL-ODU-MIB