All MIBs › SAMSUNG-CLONING-MIB
Organization: Samsung Common Management Interface Working Group
Last Updated: 2005-11-09
Category: Samsung Device Management
Description:
Manages Samsung device configuration cloning and bulk configuration copy operations.
Imported Objects
From HOST-RESOURCES-MIB
| hrDeviceIndex | OBJECT-TYPE |
From SAMSUNG-COMMON-MIB
| samsungCommonMIB | OBJECT-IDENTITY |
From SNMPv2-CONF
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE |
What Is SAMSUNG-CLONING-MIB?
SAMSUNG-CLONING-MIB is a vendor-specific extension MIB from Samsung, built as an extension to the IETF Printer MIB (RFC 1759), used to manage networked laser printers and multifunction devices. It focuses on device configuration cloning, allowing an administrator to copy one printer's complete configuration set to one or many other printers of the same model, rather than exposing broad hardware sensor data. In terms of monitoring, this module is chiefly useful for tracking the status/progress and outcome of a configuration clone (bulk copy) operation -- whether a clone job succeeded, failed, or is in progress -- rather than temperature, fan, or CPU telemetry. It explicitly depends on and extends the IETF Printer MIB (RFC 1759), and is only meaningful alongside that standard MIB's printer status objects. It is deployed in enterprise print-fleet management scenarios where IT staff rely on SAMSUNG-CLONING-MIB SNMP monitoring to roll out identical settings across many Samsung printers/MFPs quickly.
IPNetwork Monitor allows you to monitor SNMP objects defined in SAMSUNG-CLONING-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- clone/copy operation status
- clone job success or failure
- source and target device identification
- bulk configuration copy progress
Supported Devices
- Samsung network laser printer
- Samsung multifunction printer (MFP)
Monitoring Examples
Sample objects were not enumerated for this MIB, but given its stated purpose an administrator would typically trigger and poll a clone-operation status object to confirm that a bulk configuration copy from a master printer to target printers completed successfully. A typical anomaly this would reveal is a clone job that stalls or fails on one target device in a fleet rollout, indicating a firmware mismatch or connectivity issue with that device.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| scmCloningMIB | 1.3.6.1.4.1.236.11.5.11.82 | Version: 1.00 Samsung SCMI Extension to IETF Printer MIB Module. This Module provides extension to the IETF Printer MIB. Copyright (C) 2003-2004 Samsung Corporation. All Rights Reserved. | ||
| scmCloning | 1.3.6.1.4.1.236.11.5.11.82.1 | |||
| scmCloningTable | 1.3.6.1.4.1.236.11.5.11.82.1.1 | not-accessible | ||
| scmCloningEntry | 1.3.6.1.4.1.236.11.5.11.82.1.1.1 | not-accessible | A set of result for clonning on this device. If the device has no cloning result, this table is empty. | |
| I32 scmCloningIndex | 1.3.6.1.4.1.236.11.5.11.82.1.1.1.1 | Integer32 | read-only | |
| IP scmCloningIPAddress | 1.3.6.1.4.1.236.11.5.11.82.1.1.1.2 | IpAddress | read-only | This object indicates IPAdderss of device executing cloning |
| INT scmCloningResult | 1.3.6.1.4.1.236.11.5.11.82.1.1.1.3 | INTEGER | read-only | This object indicates result of the cloning |
| OCT scmCloningDate | 1.3.6.1.4.1.236.11.5.11.82.1.1.1.4 | OCTET STRING | read-only | This date represents when cloning is executed. Format of date is yyyy/mm/dd/hh/mm/ss |
| scmCloningSimple | 1.3.6.1.4.1.236.11.5.11.82.1.2 | |||
| IP scmCloningLastIPAddress | 1.3.6.1.4.1.236.11.5.11.82.1.2.1 | IpAddress | read-only | This object indicates IPAdderss of device executing cloning lately |
| INT scmCloningLastResult | 1.3.6.1.4.1.236.11.5.11.82.1.2.2 | INTEGER | read-only | This object indicates result of the latest cloning |
| OCT scmCloningLastDate | 1.3.6.1.4.1.236.11.5.11.82.1.2.3 | OCTET STRING | read-only | This object indicates date of the latest cloning. Format of date is yyyy/mm/dd/hh/mm/ss |
| INT scmCloningSupported | 1.3.6.1.4.1.236.11.5.11.82.1.2.4 | INTEGER | read-only | This object indicates whethere device supports cloning or not |
| scmCloningTrap | 1.3.6.1.4.1.236.11.5.11.82.1.3 | The value of the enterprise-specific oid in a SNMPv1 trap sent signalling a critical event in the JobAccounting | ||
| scmCloningTrapSimple | 1.3.6.1.4.1.236.11.5.11.82.1.3.1 | |||
| NTF scmCloningTrapResult | 1.3.6.1.4.1.236.11.5.11.82.1.3.1.1 | This trap is sent whenever clone is completed |
RFC description
Samsung printer cloning configuration MIB, extending IETF Printer MIB for device cloning management.
Start monitoring Samsung network laser printer, Samsung multifunction printer (MFP) (config cloning job status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.