S5-TOKENRING-COMMON-MIB

All MIBs › S5-TOKENRING-COMMON-MIB

Category: Avaya BayStack Token Ring

Description: Defines common Token Ring interface objects shared across BayStack device families.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is S5-TOKENRING-COMMON-MIB?

S5-TOKENRING-COMMON-MIB is a Bay Networks/SynOptics (S5, 'Series 5000') proprietary MIB reporting per-port Token Ring hardware status, common across S5000-series Token Ring boards. Its port table, keyed by board/port index, records wrap status/time, ring-insertion status, phantom-drive status and change count, trunk-access-method strap/actual setting, port class/media/connector type, software-insertion capability, and auto-fault-detect (AFD) status, while an FPU (Fiber Port Unit) table records type, version, capabilities, and running mode. As a hardware-status MIB it lets an administrator confirm a Token Ring port's insertion and wrap status when diagnosing a port that won't join the ring. It is deployed on Bay Networks/SynOptics S5000-series Token Ring boards. Engineers can download the S5-TOKENRING-COMMON-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in S5-TOKENRING-COMMON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Bay Networks/SynOptics S5000-series Token Ring boards

Monitoring Examples

An administrator checks s5TrPortInsrtStatus and s5TrPortWrapStatus to diagnose a Token Ring port that fails to insert into the ring on a Bay Networks/SynOptics S5000 board.

What Can Be Monitored

per-port Token Ring insertion/wrap/phantom status

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
TimeTicks

From RFC1213-MIB

DisplayString

From S5-TCS-MIB

SrcIndx
TimeIntervalSec

From S5-TOKENRING-MIB

s5TrCfg	OBJECT-IDENTITY
s5TrStat	OBJECT-IDENTITY

From SNMPv2-TC

MacAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT s5TrAttBrdIndx	1.3.6.1.4.1.45.1.6.7.1.3.1.1	INTEGER	read-only	The index of the board. This corresponds to the index of the slot containing the board.
INT s5TrAttCurSpeed	1.3.6.1.4.1.45.1.6.7.1.3.1.4	INTEGER	read-write	The current speed setting for the attachment point. The read-only value is: other(1).....unknown or other speed The read-write values are: s4Mbit(2)....4Mbit s16Mbit(3)...16Mbit
INT s5TrAttDfltSpeed	1.3.6.1.4.1.45.1.6.7.1.3.1.3	INTEGER	read-only	The default speed setting for the attachment point. The values are: other(1).....unknown or other speed s4Mbit(2)....4Mbit s16Mbit(3)...16Mbit
s5TrAttEntry	1.3.6.1.4.1.45.1.6.7.1.3.1		not-accessible	A row in Token Ring attachment table. Entries can not be created or deleted via SNMP.
INT s5TrAttFault	1.3.6.1.4.1.45.1.6.7.1.3.1.5	INTEGER	read-only	A fault indicator for the attachment point. The values are: other(1).....not connected to a backplane network or value is unknown nofault(2)...no fault detected fault(3).....fault detected.
INT s5TrAttIndx	1.3.6.1.4.1.45.1.6.7.1.3.1.2	INTEGER	read-only	The index of the attachment point on the board.
s5TrAttTable	1.3.6.1.4.1.45.1.6.7.1.3		not-accessible	A table containing information about each Token Ring attachment point on a board. This table extends table s5ChasAttTable for Token Ring Boards.
INT s5TrBkDiv	1.3.6.1.4.1.45.1.6.7.1.4	INTEGER	read-write	Setting of the Token Ring backplane divider. The value that can only be read is: other(1)...unknown or other state Values that can be read and written are: split(2)...split the backplane join(3)....join the backplane
CTR s5TrBStatBeaconFrms	1.3.6.1.4.1.45.1.6.7.2.1.1.13	Counter	read-only	The total number of Beacon frames (including frames with errors) detected on the ring.
CTR s5TrBStatClaimTokenFrms	1.3.6.1.4.1.45.1.6.7.2.1.1.15	Counter	read-only	The total number of Claim Token frames (including frames with errors) detected on the ring.
s5TrBStatEntry	1.3.6.1.4.1.45.1.6.7.2.1.1		not-accessible	A row in Token Ring basic statistics table. Entries can not be created or deleted via SNMP.
CTR s5TrBStatGoodErrReportFrms	1.3.6.1.4.1.45.1.6.7.2.1.1.12	Counter	read-only	The total number of Soft error Report frames (excluding frames with errors) detected on the ring.
CTR s5TrBStatLlcFrms	1.3.6.1.4.1.45.1.6.7.2.1.1.9	Counter	read-only	The total number of LLC frames (including frames with errors) detected on the ring.
CTR s5TrBStatLlcNonUcastFrms	1.3.6.1.4.1.45.1.6.7.2.1.1.10	Counter	read-only	The total number of LLC frames (including frames with errors) detected on the ring that were directed to a LLC broadcast address (i.e., 0xFFFFFFFFFFFF or 0xC000FFFFFFFF) or a local or global multicast or functional address (i.e., 0xC000xxxxxxxx).
CTR s5TrBStatLlcOctets	1.3.6.1.4.1.45.1.6.7.2.1.1.4	Counter	read-only	The total number of octets of data in LLC frames (including frames with errors) measured on the ring (excluding framing bits, but including FCS octets).
CTR s5TrBStatLlcUcastFrms	1.3.6.1.4.1.45.1.6.7.2.1.1.11	Counter	read-only	The total number of LLC frames (including frames with errors) detected on the ring that were directed to a LLC unicast address.
CTR s5TrBStatMacFrms	1.3.6.1.4.1.45.1.6.7.2.1.1.8	Counter	read-only	The total number of MAC frames (including frames with errors) detected on the ring.
CTR s5TrBStatMacOctets	1.3.6.1.4.1.45.1.6.7.2.1.1.3	Counter	read-only	The total number of octets of data in MAC frames (including frames with errors) measured on the ring (excluding framing bits, but including FCS octets).
CTR s5TrBStatRingPurgeFrms	1.3.6.1.4.1.45.1.6.7.2.1.1.14	Counter	read-only	The total number of Ring Purge frames (including frames with errors) detected on the ring.
SRC s5TrBStatSrcIndx	1.3.6.1.4.1.45.1.6.7.2.1.1.1	SrcIndx	read-only	The index of the entry in the table. This index identifies the source of the information. Only those sources that provide these statistics are in this table.
s5TrBStatTable	1.3.6.1.4.1.45.1.6.7.2.1		not-accessible	A table containing Token Ring basic statistics. The entries in the table may come from several different data sources including FPUs (Frame Processing Units) and MACs on NMMs (Network Management Modules). The number of entries is determined by the number of sources that can provide the information.
CTR s5TrBStatTtlBadFrms	1.3.6.1.4.1.45.1.6.7.2.1.1.7	Counter	read-only	The total number of LLC frames and MAC frames with errors detected on the ring.
CTR s5TrBStatTtlFrms	1.3.6.1.4.1.45.1.6.7.2.1.1.5	Counter	read-only	The total number of LLC frames and MAC frames (including frames with errors) detected on the ring.
CTR s5TrBStatTtlGoodFrms	1.3.6.1.4.1.45.1.6.7.2.1.1.6	Counter	read-only	The total number of LLC frames and MAC frames (excluding frames with errors) detected on the ring.
CTR s5TrBStatTtlOctets	1.3.6.1.4.1.45.1.6.7.2.1.1.2	Counter	read-only	The total number of octets of data in LLC frames and MAC frames (including frames with errors) measured on the ring (excluding framing bits, but including FCS octets).
MAC s5TrBStatUna	1.3.6.1.4.1.45.1.6.7.2.1.1.16	MacAddress	read-only	The MAC address of the next active upstream neighbor (NAUN) (or upstream neighbor address (UNA)) of the ring monitoring source. If it is unknown or at power reset (for example, no activity on the ring), the value is 00:00:00:00:00:00. The old value of the NAUN will be held, even if the ring becomes inactive (i.e., it will not clear to zero after no activity).
CTR s5TrEStatAbortErrs	1.3.6.1.4.1.45.1.6.7.2.3.1.7	Counter	read-only	Total number of abort delimiter transmitted errors reported by all stations in error report frames and detected on the ring. Section 3.8.5 of IEEE 802.5 specification.
CTR s5TrEStatACErrs	1.3.6.1.4.1.45.1.6.7.2.3.1.6	Counter	read-only	Total number of AC (Address Copied) errors reported by all stations in error report frames and detected on the ring. Section 3.8.4 of IEEE 802.5 specification.
CTR s5TrEStatBurstErrs	1.3.6.1.4.1.45.1.6.7.2.3.1.5	Counter	read-only	Total number of burst errors reported by all stations in error report frames and detected on the ring. Section 3.8.3 of IEEE 802.5 specification.
CTR s5TrEStatCongestionErrs	1.3.6.1.4.1.45.1.6.7.2.3.1.9	Counter	read-only	Total number of receive congestion errors reported by all stations in error report frames and detected on the ring. Section 3.8.7 of IEEE 802.5 specification.
CTR s5TrEStatDropEvents	1.3.6.1.4.1.45.1.6.7.2.3.1.2	Counter	read-only	Total number of events in which frames were dropped by the data source due to lack of resources. Note that this number is not necessarily the number of frames dropped; it is just the number of times this condition has been detected.
s5TrEStatEntry	1.3.6.1.4.1.45.1.6.7.2.3.1		not-accessible	A row in Token Ring error statistics table. Entries can not be created or deleted via SNMP.
CTR s5TrEStatFrameCopiedErrs	1.3.6.1.4.1.45.1.6.7.2.3.1.10	Counter	read-only	Total number of frame copied errors reported by all stations in error report frames and detected on the ring. Section 3.8.8 of IEEE 802.5 specification.
CTR s5TrEStatFrequencyErrs	1.3.6.1.4.1.45.1.6.7.2.3.1.11	Counter	read-only	Total number of frequency errors reported by all stations in error report frames and detected on the ring. Section 3.8.9 of IEEE 802.5 specification.
CTR s5TrEStatInternalErrs	1.3.6.1.4.1.45.1.6.7.2.3.1.4	Counter	read-only	Total number of adapter internal errors reported by all stations in error report frames and detected on the ring. Section 3.8.2 of IEEE 802.5 specification.
CTR s5TrEStatLineErrs	1.3.6.1.4.1.45.1.6.7.2.3.1.3	Counter	read-only	Total number of line errors reported by all stations in error report frames and detected on the ring. Section 3.8.1 of IEEE 802.5 specification.
CTR s5TrEStatLostFrameErrs	1.3.6.1.4.1.45.1.6.7.2.3.1.8	Counter	read-only	Total number of frames lost errors reported by all stations in error report frames and detected on the ring. Section 3.8.6 of IEEE 802.5 specification.
CTR s5TrEStatSoftErrFrms	1.3.6.1.4.1.45.1.6.7.2.3.1.13	Counter	read-only	Total number of error report frames detected on the ring. (Note: this has the same count as object s5TrBStatGoodErrReportFrms.)
SRC s5TrEStatSrcIndx	1.3.6.1.4.1.45.1.6.7.2.3.1.1	SrcIndx	read-only	The index of the entry in the table. This index identifies the source of the information. Only those sources that provide these statistics are in this table.
s5TrEStatTable	1.3.6.1.4.1.45.1.6.7.2.3		not-accessible	A table containing Token Ring error statistics. The entries in the table may come from several different data sources. The number of entries is determined by the number of sources that can provide the information. (For example, this table is valid only on NMMs when they have become a Ring Error Monitor (REM).
CTR s5TrEStatTokenErrs	1.3.6.1.4.1.45.1.6.7.2.3.1.12	Counter	read-only	Total number of token errors reported by all stations in error report frames and detected on the ring. Section 3.8.10 of IEEE 802.5 specification.
INT s5TrFpuBrdIndx	1.3.6.1.4.1.45.1.6.7.1.2.1.1	INTEGER	read-only	The index of the board. This corresponds to the index of the slot containing the board.
INT s5TrFpuCapabilites	1.3.6.1.4.1.45.1.6.7.1.2.1.6	INTEGER	read-only	The capabilities of the FPU. The values are: other (1)...............Other or unknown coreStatistics(2).......Core statistics FPU embeddedManagement(3)...FPU capable of core statistics and roving; both features are mutually exclusive.
s5TrFpuEntry	1.3.6.1.4.1.45.1.6.7.1.2.1		not-accessible	A row in the Token Ring FPU table. Entries can not be created or deleted via SNMP.
INT s5TrFpuIndx	1.3.6.1.4.1.45.1.6.7.1.2.1.2	INTEGER	read-only	The index of the FPU on the board. The value ranges between 1 and the number of FPUs on the board.
INT s5TrFpuRunningMode	1.3.6.1.4.1.45.1.6.7.1.2.1.7	INTEGER	read-write	The running mode of the FPU. These values are for both read and write with the exception of other(1) which is for read only. The values are: other(1).......................Other or unknown coreStatistics(2)..............FPU running in core statistics mode. roving(4)......................FPU running in roving mode; Note: core statistics is unavailable in this mode. securityRoving(5)..............FPU running in roving mode due to authorized nodes security being turned on.
s5TrFpuTable	1.3.6.1.4.1.45.1.6.7.1.2		not-accessible	A table containing information about each FPU (Frame Processing Unit) on a board.
INT s5TrFpuType	1.3.6.1.4.1.45.1.6.7.1.2.1.3	INTEGER	read-only	The type of FPU. The values are: other(1).....other or unknown cluster(2)...FPU is associated with a cluster port(3)......FPU is associated with a port roving(4)....FPU is a virtual one due to roving embedded management FPU. The type index s5TrFpuTypeIndx specifies port number in this case. This describes at what point an FPU is connected so that it can collect information.
INT s5TrFpuTypeIndx	1.3.6.1.4.1.45.1.6.7.1.2.1.4	INTEGER	read-only	The index of the cluster or port that the FPU is associated with. The object s5TrFpuType type specifies the type.
STR s5TrFpuVer	1.3.6.1.4.1.45.1.6.7.1.2.1.5	DisplayString	read-only	The version of the FPU. If not available, then the value is a zero length string.
CTR s5TrFStatDropEvents	1.3.6.1.4.1.45.1.6.7.2.2.1.2	Counter	read-only	The total number of events in which frames were dropped by the data source due to lack of resources. Note that this number is not necessarily the number of frames dropped; it is just the number of times this condition has been detected.
s5TrFStatEntry	1.3.6.1.4.1.45.1.6.7.2.2.1		not-accessible	A row in Token Ring frame size distribution statistics table. Entries can not be created or deleted via SNMP.
CTR s5TrFStatLlcFrms1024to2047Octets	1.3.6.1.4.1.45.1.6.7.2.2.1.8	Counter	read-only	The total number of LLC frames (excluding frames with errors) measured on the ring that were between 1024 and 2047 octets in length inclusive, excluding framing bits but including FCS octets.
CTR s5TrFStatLlcFrms128to255Octets	1.3.6.1.4.1.45.1.6.7.2.2.1.5	Counter	read-only	The total number of LLC frames (excluding frames with errors) measured on the ring that were between 128 and 255 octets in length inclusive, excluding framing bits but including FCS octets.
CTR s5TrFStatLlcFrms18to63Octets	1.3.6.1.4.1.45.1.6.7.2.2.1.3	Counter	read-only	The total number of LLC frames (excluding frames with errors) measured on the ring that were between 18 and 63 octets in length inclusive, excluding framing bits but including FCS octets.
CTR s5TrFStatLlcFrms2048to4095Octets	1.3.6.1.4.1.45.1.6.7.2.2.1.9	Counter	read-only	The total number of LLC frames (excluding frames with errors) measured on the ring that were between 2048 and 4095 octets in length inclusive, excluding framing bits but including FCS octets.
CTR s5TrFStatLlcFrms256to511Octets	1.3.6.1.4.1.45.1.6.7.2.2.1.6	Counter	read-only	The total number of LLC frames (excluding frames with errors) measured on the ring that were between 256 and 511 octets in length inclusive, excluding framing bits but including FCS octets.
CTR s5TrFStatLlcFrms4096to8191Octets	1.3.6.1.4.1.45.1.6.7.2.2.1.10	Counter	read-only	The total number of LLC frames (excluding frames with errors) measured on the ring that were between 4096 and 8191 octets in length inclusive, excluding framing bits but including FCS octets.
CTR s5TrFStatLlcFrms512to1023Octets	1.3.6.1.4.1.45.1.6.7.2.2.1.7	Counter	read-only	The total number of LLC frames (excluding frames with errors) measured on the ring that were between 512 and 1023 octets in length inclusive, excluding framing bits but including FCS octets.
CTR s5TrFStatLlcFrms64to127Octets	1.3.6.1.4.1.45.1.6.7.2.2.1.4	Counter	read-only	The total number of LLC frames (excluding frames with errors) measured on the ring that were between 64 and 127 octets in length inclusive, excluding framing bits but including FCS octets.
CTR s5TrFStatLlcFrms8192to18000Octets	1.3.6.1.4.1.45.1.6.7.2.2.1.11	Counter	read-only	The total number of LLC frames (excluding frames with errors) measured on the ring that were between 8192 and 18000 octets in length inclusive, excluding framing bits but including FCS octets.
CTR s5TrFStatLlcFrmsGreaterThan18000Octets	1.3.6.1.4.1.45.1.6.7.2.2.1.12	Counter	read-only	The total number of LLC frames (excluding frames with errors) measured on the ring that were greater than 18000 octets in length, excluding framing bits but including FCS octets.
SRC s5TrFStatSrcIndx	1.3.6.1.4.1.45.1.6.7.2.2.1.1	SrcIndx	read-only	The index of the entry in the table. This index identifies the source of the information. Only those sources that provide these statistics are in this table.
s5TrFStatTable	1.3.6.1.4.1.45.1.6.7.2.2		not-accessible	A table containing Token Ring frame size distribution statistics. These statistics are for LLC frames. Counters for frames and octets can be found in the basic statistics table. The entries in this table may come from several different data sources. The number of entries is determined by the number of sources that can provide the information.
INT s5TrPortAFD	1.3.6.1.4.1.45.1.6.7.1.1.1.14	INTEGER	read-write	This object reflects the capability for a port to disable AFD, Automatic Frequency Detection. The following values can be read: notCapableOfAFDDisable(1)... The port is incapable of AFD disable. capableAndAFDEnabled(2)... The port is capable of AFD disable and the current AFD is enabled. capableAndAFDDisabled(3)... The port is capable of AFD disable and the current AFD is disabled. The following values can be written: capableAndAFDEnabled(2)... Enable the AFD. capableAndAFDDisabled(3)... Disable the AFD. Note: The values capableAndAFDEnabled(2) and capableAndAFDDisabled(3) are only valid for writing if the port has the capability of AFD disable.
INT s5TrPortBrdIndx	1.3.6.1.4.1.45.1.6.7.1.1.1.1	INTEGER	read-only	The index of the board. This corresponds to the index of the slot containing the board.
INT s5TrPortClass	1.3.6.1.4.1.45.1.6.7.1.1.1.10	INTEGER	read-only	The port class. The values are: other(1)......unknown or some other type ri(2).........Ring In port ro(3).........Ring Out port lobe(4).......Lobe port internal(5)...Internal port which may be connected to a backplane ring
INT s5TrPortConnector	1.3.6.1.4.1.45.1.6.7.1.1.1.12	INTEGER	read-only	The port connector type. The values are: other(1)......unknown or some other type internal(2)...no external connector db9(3)........DB9 rj45(4).......RJ-45 fiberST(5)....fiber ST
s5TrPortEntry	1.3.6.1.4.1.45.1.6.7.1.1.1		not-accessible	A row in Token Ring port table. Entries can not be created or deleted via SNMP.
MAC s5TrPortFpuStatsAddr	1.3.6.1.4.1.45.1.6.7.1.7.1.3	MacAddress	read-only	The MAC address of the station currently/last attached to the port. For ring in, ring out and cascade expansion ports, this MAC address is the UNA (Upstream Neighbor Address) as seen by the port. If no station has ever been connected to this port, the address should be zero.
INT s5TrPortFpuStatsBrdIndx	1.3.6.1.4.1.45.1.6.7.1.7.1.1	INTEGER	read-only	The index of the board. This corresponds to the index of the slot containing the board.
s5TrPortFpuStatsEntry	1.3.6.1.4.1.45.1.6.7.1.7.1		not-accessible	A row in the Port FPU statistics table. Entries can not be created or deleted via SNMP.
INT s5TrPortFpuStatsPortIndx	1.3.6.1.4.1.45.1.6.7.1.7.1.2	INTEGER	read-only	The index of the port on the board. The value ranges between 1 and the number of manageable ports on the board.
CTR s5TrPortFpuStatsRxOctets	1.3.6.1.4.1.45.1.6.7.1.7.1.6	Counter	read-only	Total number of octets received at this port. If no station is connected to the port, the counter should return the last collected value.
CTR s5TrPortFpuStatsRxPkts	1.3.6.1.4.1.45.1.6.7.1.7.1.7	Counter	read-only	The number of packets receive at this port. If no station is connected to the port, the counter should return the last collected value.
s5TrPortFpuStatsTable	1.3.6.1.4.1.45.1.6.7.1.7		not-accessible	A table containing FPU statistics information for each managed token ring connectivity port on a board.
CTR s5TrPortFpuStatsTxOctets	1.3.6.1.4.1.45.1.6.7.1.7.1.4	Counter	read-only	Total number of octets transmitted at this port. If no station is connected to the port, the counter should return the last collected value.
CTR s5TrPortFpuStatsTxPkts	1.3.6.1.4.1.45.1.6.7.1.7.1.5	Counter	read-only	Total number of packets transmitted at this port. If no station is connected to the port, the counter should return the last collected value.
INT s5TrPortIndx	1.3.6.1.4.1.45.1.6.7.1.1.1.2	INTEGER	read-only	The index of the port on the board. Its value ranges between 1 and the number of manageable ports on the board.
CTR s5TrPortInfoAbortErrs	1.3.6.1.4.1.45.1.6.7.1.6.1.15	Counter	read-only	Total number of abort delimiter transmitted errors detected from this port.
CTR s5TrPortInfoACErrs	1.3.6.1.4.1.45.1.6.7.1.6.1.14	Counter	read-only	Total number of AC (Address Copied) errors detected from this port.
MAC s5TrPortInfoAddr	1.3.6.1.4.1.45.1.6.7.1.6.1.4	MacAddress	read-only	The MAC address of the station currently/last attached to the port. If no station in the ring can be found attached to the port, the address should be 0
CTR s5TrPortInfoBeaconErrs	1.3.6.1.4.1.45.1.6.7.1.6.1.21	Counter	read-only	Total number of beacon frames detected from this port.
INT s5TrPortInfoBrdIndx	1.3.6.1.4.1.45.1.6.7.1.6.1.2	INTEGER	read-only	The index of the board. This corresponds to the index of the slot containing the board.
CTR s5TrPortInfoBurstErrs	1.3.6.1.4.1.45.1.6.7.1.6.1.13	Counter	read-only	Total number of burst errors detected from this port.
CTR s5TrPortInfoCongestionErrs	1.3.6.1.4.1.45.1.6.7.1.6.1.17	Counter	read-only	Total number of receive congestion errors detected from this port .
CTR s5TrPortInfoDupAddrErrs	1.3.6.1.4.1.45.1.6.7.1.6.1.10	Counter	read-only	Total number of duplicate address error detected from this port.
s5TrPortInfoEntry	1.3.6.1.4.1.45.1.6.7.1.6.1		not-accessible	A row in the port information table. Entries can not be created or deleted via SNMP.
TIK s5TrPortInfoFirstEnterTime	1.3.6.1.4.1.45.1.6.7.1.6.1.7	TimeTicks	read-only	The value of sysUpTime when this port first time entered the ring. If the time is unknown, the value shall be zero.
CTR s5TrPortInfoFrameCopiedErrs	1.3.6.1.4.1.45.1.6.7.1.6.1.18	Counter	read-only	Total number of frame copied errors detected from this port.
CTR s5TrPortInfoFrequencyErrs	1.3.6.1.4.1.45.1.6.7.1.6.1.19	Counter	read-only	Total number of frequency errors detected from this port.
CTR s5TrPortInfoInsertions	1.3.6.1.4.1.45.1.6.7.1.6.1.22	Counter	read-only	Total number of times that the port was detected inserting into the ring.
CTR s5TrPortInfoInternalErrs	1.3.6.1.4.1.45.1.6.7.1.6.1.12	Counter	read-only	Total number of adapter internal errors detected from this port.
TIK s5TrPortInfoLastEnterTime	1.3.6.1.4.1.45.1.6.7.1.6.1.8	TimeTicks	read-only	The value of sysUpTime when this port last time entered the ring. If the time is unknown, the value shall be zero.
TIK s5TrPortInfoLastExitTime	1.3.6.1.4.1.45.1.6.7.1.6.1.9	TimeTicks	read-only	The value of sysUpTime when this port last exited the ring. If the time is unknown, the value shall be zero.
MAC s5TrPortInfoLastNaun	1.3.6.1.4.1.45.1.6.7.1.6.1.5	MacAddress	read-only	The MAC address of the last known NAUN (Next Active Upstream Neighbor) of the station currently/last attached to the port.
CTR s5TrPortInfoLineErrs	1.3.6.1.4.1.45.1.6.7.1.6.1.11	Counter	read-only	Total number of line errors detected from this port.
CTR s5TrPortInfoLostFrameErrs	1.3.6.1.4.1.45.1.6.7.1.6.1.16	Counter	read-only	Total number of lost frame errors detected from this port.
INT s5TrPortInfoPortIndx	1.3.6.1.4.1.45.1.6.7.1.6.1.3	INTEGER	read-only	The index of the port on the board. Its value ranges between 1 and the number of manageable ports on the board.
SRC s5TrPortInfoSrcIndx	1.3.6.1.4.1.45.1.6.7.1.6.1.1	SrcIndx	read-only	This index identifies the source of the information. Only those sources that provide these statistics are in this table.
INT s5TrPortInfoStationStatus	1.3.6.1.4.1.45.1.6.7.1.6.1.6	INTEGER	read-only	The insertion status of the station currently/last attached to the port. The values are: active(1)..........Actively participating in ring poll from this port notInRingPoll(2)...Detected on the ring, but not currently participating in the ring poll from this port inactive(3)........ No longer on the ring from this port forcedRemoval(4)... forced off the ring from this port by network management.
s5TrPortInfoTable	1.3.6.1.4.1.45.1.6.7.1.6		not-accessible	A table containing information for each managed token ring connectivity port on a board, excluding ring in, ring out, and those used as cascade expansion. The number of entries is determined by the number of manageable ports and the number of occupied slots in s5ChasComTable whose s5ChasComType is of a token Ring type and is on the same backplane ring as the NMM interface.
CTR s5TrPortInfoTokenErrs	1.3.6.1.4.1.45.1.6.7.1.6.1.20	Counter	read-only	Total number of token errors detected from this port.
INT s5TrPortInsrtStatus	1.3.6.1.4.1.45.1.6.7.1.1.1.5	INTEGER	read-only	The port insertion status. The values are: other(1).........status unknown notInserted(2)...port is not inserted inserted(3)......port inserted into the ring
INT s5TrPortMedia	1.3.6.1.4.1.45.1.6.7.1.1.1.11	INTEGER	read-only	The port media type. The values are: other(1)...........unknown or some other type synFiber(2)........SynOptics Fiber stdFiber(3)........Standard Fiber copperActive(4)....Active copper copperPassive(5)...Passive copper mac(6).............Internal MAC specialProc(7).....Internal special processor
CTR s5TrPortPhanChngs	1.3.6.1.4.1.45.1.6.7.1.1.1.7	Counter	read-only	A counter of changes of s5TrPortPhanStatus from noPhantom(2) to phantom(3).
INT s5TrPortPhanStatus	1.3.6.1.4.1.45.1.6.7.1.1.1.6	INTEGER	read-only	The port phantom status. The values are: other(1).............status unknown noPhantom(2).........no phantom signal phantom(3)...........phantom signal is on softwarePhantom(4)...phantom signal is on by turning on software insertion (see s5TrPortSoftwareInsertion for more details) Note: for RI/RO ports, this signal is driven by the 'lowlight' detector. For RI/RO ports that have the value of none(3) for s5TrPortTrnkAccMthd, this value will always be phantom(3).
INT s5TrPortSoftwareInsertion	1.3.6.1.4.1.45.1.6.7.1.1.1.13	INTEGER	read-write	This object reflects the capability for a port to connect to the Ring-In (RI) or Ring-Out (RO) port of a MAU by software controlled phantom insertion. The following values can be read: notCapableOfSoftwareInsertion(1)... The port is incapable of software insertion and therefore cannot connect to the RI or RO port of a MAU capableAndSoftwareInsertionOn(2)... The port is capable of software insertion, and software insertion is on capableAndSoftwareInsertionOff(3)... The port is capable of software insertion, and software insertion is off The following values can be written: capableAndSoftwareInsertionOn(2)... Turns on the software insertion (see note) capableAndSoftwareInsertionOff(3)... Turns off the software insertion (see note) Note: The values capableAndSoftwareInsertionOn(2) and capableAndSoftwareInsertionOff(3) are only valid for writing if the port has the capability of software insertion.
s5TrPortTable	1.3.6.1.4.1.45.1.6.7.1.1		not-accessible	A table containing information about each port on a board. The number of entries is determined by the number of manageable ports. Those boards that do not have any manageable ports do not have any entries in this table.
INT s5TrPortTrnkAccMthd	1.3.6.1.4.1.45.1.6.7.1.1.1.9	INTEGER	read-write	The operational setting for the RI/RO port trunk validation method. The following values can be written: synoptics(2)...use SynOptics method none(3)........no validation done The following values can be read: notSupported(1)...not a RI/RO port, or a fiber port synoptics(2)......use SynOptics method none(3)...........do no validation
INT s5TrPortTrnkAccMthdStrap	1.3.6.1.4.1.45.1.6.7.1.1.1.8	INTEGER	read-only	The strap (hardware jumper) setting for the RI/RO port trunk validation method. The values are: notSupported(1)...a fiber port, or not a RI/RO port synoptics(2)......use SynOptics method none(3)...........no validation done The operational method used is indicated by the value of s5TrPortTrnkAccMthd.
INT s5TrPortWrapStatus	1.3.6.1.4.1.45.1.6.7.1.1.1.3	INTEGER	read-write	The wrap status of the port. The following values can be written: wrap(2)........wrap the port connect(3).....unwrap the port timedWrap(4)...time wrap port (uses value from s5TrPortWrapTime) The following values reflect the wrap status of the port: other(1)............wrap status unknown wrap(2).............port is wrapped connect(3)..........port is not wrapped timedWrap(4)........port is timed wrapped (see value of s5TrPortWrapTime) nmmBeaconWrap(5)....beaconing station automatically removed by an NMM wrongSpeedWrap(6)...station with wrong speed automatically removed permBeaconWrap(7)...station permanently removed by an NMM since it attempted to deinsert and insert in the ring at a high rate while it beacons the ring. On GETs with port status of timeWrap(4), if the time remaining before the wrap is undone is available, it will be reported in object s5TrPortWrapTime as a positive value. If not available, the value of s5TrPortWrapTime will be zero. When changing a port to timedWrap(4), the SET request must also contain the value for object s5TrPortWrapTime. Only value wrap(2) will survive resets of the host card.
NUM s5TrPortWrapTime	1.3.6.1.4.1.45.1.6.7.1.1.1.4	TimeIntervalSec	read-write	The length of time to keep the port wrapped when a timed wrap is done to the board. This object can only be written in the same request that sets s5TrPortWrapStatus to timedWrap(4). Afterwards, it indicates the amount of time left before the timed wrap is completed, at which time s5TrPortWrapStatus is changed to connect(3). This object has the value of zero if the port is not timed wrapped, and also if the amount of time is not available.
s5TrRingExt	1.3.6.1.4.1.45.1.6.7.1.5
INT s5TrRingExtBoardIndx	1.3.6.1.4.1.45.1.6.7.1.5.3.1.1	INTEGER	read-only	The index of the board which has RI/RO. This corresponds to the index of the slot containing the board.
INT s5TrRingExtClusterNumber	1.3.6.1.4.1.45.1.6.7.1.5.3.1.11	INTEGER	read-only	The cluster number where RI/RO pair is located on the board.
INT s5TrRingExtCurNum	1.3.6.1.4.1.45.1.6.7.1.5.2	INTEGER	read-only	The current number of entries in the Ring Extension Table.
s5TrRingExtEntry	1.3.6.1.4.1.45.1.6.7.1.5.3.1		not-accessible	A row in the Ring Extension table. Entries can not be created or deleted via SNMP.
OCT s5TrRingExtEos	1.3.6.1.4.1.45.1.6.7.1.5.5.1.1	OCTET STRING	read-only	An encoded octet string. On reads it contains an integral number of 'rows' from table s5TrRingExtTable. All 'rows' are the same size which is defined by object s5TrRingExtEosSize.
s5TrRingExtEosEntry	1.3.6.1.4.1.45.1.6.7.1.5.5.1		not-accessible	A row in the table of encoded octet strings for table s5TrRingExtTable. Instance returned in Response PDU: On GETs: instance specified is the instance returned. On GET-NEXTs: instance returned is the instance of the last record contained in the octet string. Entries in the table can not be created or deleted via SNMP.
INT s5TrRingExtEosSize	1.3.6.1.4.1.45.1.6.7.1.5.4	INTEGER	read-only	The current size of a 'row' in the table s5TrRingExtEosTable. This allows applications to be able to break apart 'rows' in the table.
s5TrRingExtEosTable	1.3.6.1.4.1.45.1.6.7.1.5.5		not-accessible	A table of encoded octet strings of entries in table s5TrRingExtTable. The number of entries is determined by the packing of 'rows' from s5TrRingExtTable.
INT s5TrRingExtExtensionIndx	1.3.6.1.4.1.45.1.6.7.1.5.3.1.2	INTEGER	read-only	The index of the RI/RO extension pair on the board. The value ranges between 1 and the number of RI/RO pairs on the board.
TIK s5TrRingExtLastChange	1.3.6.1.4.1.45.1.6.7.1.5.1	TimeTicks	read-only	The value of sysUpTime when the last change of any Ring Extension table entry within the chassis was detected.
INT s5TrRingExtRingInPhanStatus	1.3.6.1.4.1.45.1.6.7.1.5.3.1.7	INTEGER	read-only	The phantom status of the Ring In port. The values are: other(1).........status unknown noPhantom(2).....no phantom signal phantom(3).......phantom signal is on.
INT s5TrRingExtRingInPortNumber	1.3.6.1.4.1.45.1.6.7.1.5.3.1.12	INTEGER	read-only	The port number where RI is located on the board.
MAC s5TrRingExtRingInUna	1.3.6.1.4.1.45.1.6.7.1.5.3.1.4	MacAddress	read-only	The upstream neighbor address to the Ring In port.
INT s5TrRingExtRingInWrapStatus	1.3.6.1.4.1.45.1.6.7.1.5.3.1.9	INTEGER	read-only	The wrap status of the Ring-In port. The values are: other(1)............wrap status unknown wrap(2).............port is wrapped connect(3)..........port is unwrapped
INT s5TrRingExtRingNumber	1.3.6.1.4.1.45.1.6.7.1.5.3.1.3	INTEGER	read-only	The logical ring number of the ring that RI/RO connects to.
INT s5TrRingExtRingOutPhanStatus	1.3.6.1.4.1.45.1.6.7.1.5.3.1.8	INTEGER	read-only	The phantom status of the Ring Out port. The values are: other(1).........status unknown noPhantom(2).....no phantom signal phantom(3).......phantom signal is on.
INT s5TrRingExtRingOutPortNumber	1.3.6.1.4.1.45.1.6.7.1.5.3.1.13	INTEGER	read-only	The port number where RO is located on the board.
MAC s5TrRingExtRingOutUna	1.3.6.1.4.1.45.1.6.7.1.5.3.1.5	MacAddress	read-only	The upstream neighbor address to the Ring Out port.
INT s5TrRingExtRingOutWrapStatus	1.3.6.1.4.1.45.1.6.7.1.5.3.1.10	INTEGER	read-only	The wrap status of the Ring-Out port. The values are: other(1)............wrap status unknown wrap(2).............port is wrapped connect(3)..........port is unwrapped
MAC s5TrRingExtSecUna	1.3.6.1.4.1.45.1.6.7.1.5.3.1.6	MacAddress	read-only	The (secondary) upstream neighbor address as read by the FPU that is located between RI and RO.
s5TrRingExtTable	1.3.6.1.4.1.45.1.6.7.1.5.3		not-accessible	A table containing information about each RI/RO (Ring In / Ring Out) pair on a board. The number of entries is determined by the number of existing RI/RO pairs. Those boards that do not have any RI/RO do not have any entries in this table.

RFC description

Bay Networks token ring interface configuration and status MIB for managing ring ports, wrapping, and insertion.

Start monitoring Bay Networks/SynOptics S5000-series Token Ring boards (per-port ring insertion/wrap status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download S5-TOKENRING-COMMON-MIB

What Is S5-TOKENRING-COMMON-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description