S5-TOKENRING-COMMON-MIB :: s5TrPortSoftwareInsertion

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsS5-TOKENRING-COMMON-MIBs5TrPortSoftwareInsertion

s5TrPortSoftwareInsertion

Module: S5-TOKENRING-COMMON-MIB

OID (symbolic): S5-TOKENRING-COMMON-MIB::s5TrPortSoftwareInsertion

OID (numeric): 1.3.6.1.4.1.45.1.6.7.1.1.1.13

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object reflects the capability for a port to connect to the Ring-In (RI) or Ring-Out (RO) port of a MAU by software controlled phantom insertion.

The following values can be read: notCapableOfSoftwareInsertion(1)... The port is incapable of software insertion and therefore cannot connect to the RI or RO port of a MAU capableAndSoftwareInsertionOn(2)... The port is capable of software insertion, and software insertion is on capableAndSoftwareInsertionOff(3)... The port is capable of software insertion, and software insertion is off

The following values can be written: capableAndSoftwareInsertionOn(2)... Turns on the software insertion (see note) capableAndSoftwareInsertionOff(3)... Turns off the software insertion (see note)

Note: The values capableAndSoftwareInsertionOn(2) and capableAndSoftwareInsertionOff(3) are only valid for writing if the port has the capability of software insertion.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.6.7.1.1.1.13
snmpwalk -v2c -c public <target> S5-TOKENRING-COMMON-MIB::s5TrPortSoftwareInsertion

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.6.7.1.1.1.13.1
snmpget -v2c -c public <target> S5-TOKENRING-COMMON-MIB::s5TrPortSoftwareInsertion.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.45.1.6.7.1.1.1.13.1 i <value>

Start monitoring Bay Networks/SynOptics S5000-series Token Ring boards (per-port ring insertion/wrap status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the S5-TOKENRING-COMMON-MIB::s5TrPortSoftwareInsertion OID value, configure state conditions and alerts, and monitor any Bay Networks/SynOptics S5000-series Token Ring boards (per-port ring insertion/wrap status) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.45synopticsSYNOPTICS-ROOT-MIB
1.3.6.1.4.1.45.1productsSYNOPTICS-ROOT-MIB
1.3.6.1.4.1.45.1.6series5000SYNOPTICS-ROOT-MIB
1.3.6.1.4.1.45.1.6.7s5TokS5-ROOT-MIB
1.3.6.1.4.1.45.1.6.7.1s5TrCfgS5-TOKENRING-MIB
Numeric OIDNameModule
1.3.6.1.4.1.45.1.6.7.1.1s5TrPortTableS5-TOKENRING-COMMON-MIB
1.3.6.1.4.1.45.1.6.7.1.1.1s5TrPortEntryS5-TOKENRING-COMMON-MIB
1.3.6.1.4.1.45.1.6.7.1.1.1.13s5TrPortSoftwareInsertionS5-TOKENRING-COMMON-MIB