S5-CHASSIS-TRAP-MIB

All MIBs › S5-CHASSIS-TRAP-MIB

Organization: Nortel Networks

Last Updated: 2011-04-15

Category: Avaya BayStack Ethernet Management

Description: Defines Nortel BayStack chassis trap notifications for hardware fault and status events.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is S5-CHASSIS-TRAP-MIB?

S5-CHASSIS-TRAP-MIB is a companion Nortel/Avaya BayStack MIB that defines the SNMP trap (notification) types for chassis-level hardware faults and status changes, complementing the object definitions in S5-CHASSIS-MIB. Rather than exposing pollable data objects, it specifies the trap OIDs an agent emits when chassis hardware state changes, such as component insertion/removal or a fault condition. Its core use is asynchronous fault monitoring: it alerts a management station immediately when a hardware problem occurs on the chassis, complementing periodic polling of the chassis object MIB. It depends directly on S5-CHASSIS-MIB for the underlying chassis identity objects referenced in its trap variable bindings. It is typically deployed in Nortel/Avaya BayStack chassis switch environments where the NMS is configured to receive and act on these hardware fault traps. Network engineers evaluating or troubleshooting this functionality can download the S5-CHASSIS-TRAP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in S5-CHASSIS-TRAP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Avaya/Nortel BayStack S5000 series chassis switches

Monitoring Examples

No specific runtime object names are available in the provided source for this module; it only defines trap OIDs (notifications) that fire on chassis hardware fault or status-change events rather than exposing values for direct polling, so the realistic monitoring scenario is an NMS trap receiver reacting to a chassis fault trap rather than polling a table.

Imported Objects

From S5-CHASSIS-MIB

s5ChasComOperState	OBJECT-TYPE
s5ChasComType	OBJECT-TYPE
s5ChasNotifyFanDirection	OBJECT-TYPE

From S5-ROOT-MIB

s5ChaTrap

OBJECT-IDENTITY

From SNMPv2-SMI

MODULE-IDENTITY
NOTIFICATION-TYPE

OIDs

OID symbolic	OID numeric	Description
s5ChassisTrapMib	1.3.6.1.4.1.45.1.6.2.4.0	5000 Chassis Trap MIB Copyright 1993-2004 Nortel Networks, Inc. All rights reserved. This Nortel Networks SNMP Management Information Base Specification (Specification) embodies Nortel Networks' confidential and proprietary intellectual property. Nortel Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS,' and Nortel Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
NTF s5CtrNewHotSwap	1.3.6.1.4.1.45.1.6.2.4.0.1	A component or sub-component was inserted or deinserted in the chassis. This trap is sent only once when the condition is first detected. The following values are returned: s5ChasComType........the type of the component (or sub-component) that was inserted or deinserted, with the instance identifying the group, component, and sub-component. s5ChasComOperState...the operational status of the component or sub-component, with the instance identifying the group, component, and sub-component. The value is removed(3) when the item is removed.
NTF s5CtrNewProblem	1.3.6.1.4.1.45.1.6.2.4.0.2	A component or sub-component has a problem condition, either warning, nonfatal, or fatal. This trap is sent only once when the condition is first detected. The following values are returned: s5ChasComType........the type of the component (or sub-component) that has the problem condition, with the instance identifying the group, component, and sub-component. s5ChasComOperState...the operational status of the component or sub-component, with the instance identifying the group, component, and sub-component.
NTF s5CtrNewUnitUp	1.3.6.1.4.1.45.1.6.2.4.0.3	A component or sub-component has been newly detected. This trap is sent only once when the condition is first detected. The following values are returned: s5ChasComType........the type of the component (or sub-component) that has the problem condition, with the instance identifying the group, component, and sub-component. s5ChasComOperState...the operational status of the component or sub-component, with the instance identifying the group, component, and sub-component.
NTF s5CtrNewUnitDown	1.3.6.1.4.1.45.1.6.2.4.0.4	A component or sub-component is no longer detected. This trap is sent only once when the condition is first detected. The following values are returned: s5ChasComType........the type of the component (or sub-component) that has the problem condition, with the instance identifying the group, component, and sub-component. s5ChasComOperState...the operational status of the component or sub-component, with the instance identifying the group, component, and sub-component.
NTF s5CtrFanRotationError	1.3.6.1.4.1.45.1.6.2.4.0.5	A fan component's rotation is incorrect.
NTF s5CtrFanDirectionError	1.3.6.1.4.1.45.1.6.2.4.0.6	A fan component's direction is incorrect.
NTF s5CtrHighTemperatureError	1.3.6.1.4.1.45.1.6.2.4.0.7	The system is overheated.
NTF s5CtrHotSwap	1.3.6.1.4.1.45.1.6.2.4.1	A component or sub-component was inserted or deinserted in the chassis. This trap is sent only once when the condition is first detected. The following values are returned: s5ChasComType........the type of the component (or sub-component) that was inserted or deinserted, with the instance identifying the group, component, and sub-component. s5ChasComOperState...the operational status of the component or sub-component, with the instance identifying the group, component, and sub-component. The value is removed(3) when the item is removed.
NTF s5CtrProblem	1.3.6.1.4.1.45.1.6.2.4.2	A component or sub-component has a problem condition, either warning, nonfatal, or fatal. This trap is sent only once when the condition is first detected. The following values are returned: s5ChasComType........the type of the component (or sub-component) that has the problem condition, with the instance identifying the group, component, and sub-component. s5ChasComOperState...the operational status of the component or sub-component, with the instance identifying the group, component, and sub-component.
NTF s5CtrUnitUp	1.3.6.1.4.1.45.1.6.2.4.3	A component or sub-component has been newly detected. This trap is sent only once when the condition is first detected. The following values are returned: s5ChasComType........the type of the component (or sub-component) that has the problem condition, with the instance identifying the group, component, and sub-component. s5ChasComOperState...the operational status of the component or sub-component, with the instance identifying the group, component, and sub-component.
NTF s5CtrUnitDown	1.3.6.1.4.1.45.1.6.2.4.4	A component or sub-component is no longer detected. This trap is sent only once when the condition is first detected. The following values are returned: s5ChasComType........the type of the component (or sub-component) that has the problem condition, with the instance identifying the group, component, and sub-component. s5ChasComOperState...the operational status of the component or sub-component, with the instance identifying the group, component, and sub-component.

RFC description

Trap MIB for Nortel 5000 Chassis system events, providing notifications for component insertion, removal, and operational status changes.

Start monitoring Avaya/Nortel BayStack S5000 series chassis switches (chassis hardware fault trap notifications) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download S5-CHASSIS-TRAP-MIB

What Is S5-CHASSIS-TRAP-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description