All MIBs › RMON-MIB › alarmInterval
alarmInterval
Module: RMON-MIB
OID (symbolic): RMON-MIB::alarmInterval
OID (numeric): 1.3.6.1.2.1.16.3.1.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-create
Description:
The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be taken in the case of deltaValue sampling - the interval should be set short enough that the sampled variable is very unlikely to increase or decrease by more than 2^31 - 1 during a single sampling interval.
This object may not be modified if the associated alarmStatus object is equal to valid(1).
What is alarmInterval?
This object sets the time window (in seconds) over which RMON samples a network variable and compares it against rising and falling thresholds to generate alarms. Shorter intervals detect rapid changes but may produce more false alarms, while longer intervals are less sensitive. Operators tune this to balance responsiveness with stability based on the expected rate of change in the monitored variable.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.16 | rmon | LBHUB-BOOM-MIB |
| 1.3.6.1.2.1.16.3 | alarm | LBHUB-BOOM-MIB |
| 1.3.6.1.2.1.16.3.1 | alarmTable | LBHUB-BOOM-MIB |
| 1.3.6.1.2.1.16.3.1.1 | alarmEntry | LBHUB-BOOM-MIB |
| 1.3.6.1.2.1.16.3.1.1.2 | alarmInterval | RMON-MIB |