All MIBs › RMON-MIB › alarmFallingEventIndex
alarmFallingEventIndex
Module: RMON-MIB
OID (symbolic): RMON-MIB::alarmFallingEventIndex
OID (numeric): 1.3.6.1.2.1.16.3.1.1.10
Node type: OBJECT-TYPE
Type: Integer32
Access: read-create
Description:
The index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index.
This object may not be modified if the associated alarmStatus object is equal to valid(1).
What is alarmFallingEventIndex?
This object specifies which event definition (from the RMON event table) should be triggered when a monitored threshold value decreases below a configured limit. If set to zero, no event is generated for threshold falling conditions. Network monitoring probes use this to associate threshold violations with automated actions like sending alerts.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.16 | rmon | LBHUB-BOOM-MIB |
| 1.3.6.1.2.1.16.3 | alarm | LBHUB-BOOM-MIB |
| 1.3.6.1.2.1.16.3.1 | alarmTable | LBHUB-BOOM-MIB |
| 1.3.6.1.2.1.16.3.1.1 | alarmEntry | LBHUB-BOOM-MIB |
| 1.3.6.1.2.1.16.3.1.1.10 | alarmFallingEventIndex | RMON-MIB |