RIP-IP-PRIVATE-MIB

All MIBs › RIP-IP-PRIVATE-MIB

Organization: Lucent's Concord Technology Center (CTC)

Last Updated: 1999-02-11

Category: Routing

Description: Manages private RIP IP routing extensions for Lucent Concord Technology Center router platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RIP-IP-PRIVATE-MIB?

RIP-IP-PRIVATE-MIB, internally titled the "Cajun Private RIP MIB," is a vendor-specific module from Lucent's Concord Technology Center covering proprietary extensions to standard RIP (Routing Information Protocol) IP routing on Cajun switch/router platforms. It exposes configuration and status for RIP-related routing behavior beyond what the standard RIP-2 MIB provides, likely including vendor-specific timers or redistribution controls given its "private" naming. As a routing-protocol extension MIB it is primarily a software/configuration status tool, used to confirm RIP is enabled and functioning correctly on specific interfaces rather than exposing hardware sensor data. It builds on and extends the standard RIP-2 MIB (RFC 1724) concepts with Lucent-private additions. It would be deployed on Lucent/Avaya Cajun-series switches and routers running RIP for IP routing. Engineers can download the RIP-IP-PRIVATE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RIP-IP-PRIVATE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Lucent/Avaya Cajun switch/router

Monitoring Examples

No sample objects were provided for this MIB, so specific table/object names cannot be grounded here; in general an operator would poll per-interface RIP configuration and route-learning state to confirm RIP is actively exchanging routes on a Cajun switch's routed interfaces.

Imported Objects

From Cajun-ROOT

cjnProtocol

OBJECT-IDENTITY

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
cjnRip	1.3.6.1.4.1.1751.2.43.2.10			Cajun Private RIP MIB
cjnIpRipGblGroup	1.3.6.1.4.1.1751.2.43.2.10.1
INT cjnIpRipIsEnabled	1.3.6.1.4.1.1751.2.43.2.10.1.1	INTEGER	read-write	Enables IP RIP services on this device.
INT cjnIpRipUpdateTimer	1.3.6.1.4.1.1751.2.43.2.10.1.2	INTEGER	read-write	RIP route Advertisement Interval (sec)
INT cjnIpRipPurgeTTL	1.3.6.1.4.1.1751.2.43.2.10.1.3	INTEGER	read-write	TTL for purged RIP routes
INT cjnIpRipTriggeredUpdates	1.3.6.1.4.1.1751.2.43.2.10.1.4	INTEGER	read-write	Enable/Disable Triggered RIP updates
INT cjnIpRipInterPktDelay	1.3.6.1.4.1.1751.2.43.2.10.1.5	INTEGER	read-write	Delay between two successive RIP route Advertisements (sec)
cjnIpRipStatGroup	1.3.6.1.4.1.1751.2.43.2.10.2
cjnIpRipIfGroup	1.3.6.1.4.1.1751.2.43.2.10.3
cjnIpRipIfTable	1.3.6.1.4.1.1751.2.43.2.10.3.1		not-accessible	A list of interface specific RIP Entries
cjnIpRipIfEntry	1.3.6.1.4.1.1751.2.43.2.10.3.1.1		not-accessible	An cajun RIP Interface instance
IP cjnIpRipIfIpAddr	1.3.6.1.4.1.1751.2.43.2.10.3.1.1.1	IpAddress	read-only	The globally unique IP Address identifier for this interface. This number MUST exist in the cjnIpIfTable to be valid.
ROW cjnIpRipIfRowStatus	1.3.6.1.4.1.1751.2.43.2.10.3.1.1.2	RowStatus	read-create	The Status of this entry in the table. Note the available states: active(1), -- Obviously Active on this interface. notInService(2) -- Configured on Interface but disabled. notReady(3), -- Interface entry NOT FULLY configured. createAndGo(4), -- NOT SUPPORTED. createAndWait(5) or destroy(6)
INT cjnIpRipIfSendRcvMode	1.3.6.1.4.1.1751.2.43.2.10.3.1.1.3	INTEGER	read-create	RIP Send & Receive mode setting.
INT cjnIpRipIfSendVersion	1.3.6.1.4.1.1751.2.43.2.10.3.1.1.4	INTEGER	read-create	RIP version to adhere to, while sending updates
INT cjnIpRipIfRcvVersion	1.3.6.1.4.1.1751.2.43.2.10.3.1.1.5	INTEGER	read-create	RIP version to adhere to, while receiving updates
INT cjnIpRipIfDefaultRouteMode	1.3.6.1.4.1.1751.2.43.2.10.3.1.1.6	INTEGER	read-create	RIP default route characteristics. If this MIB Object is set to talkOnly(1) then the known default route is advertised in RIP updates but ignored on incoming neighbor updates. Is this MIB object is set to listenOnly(2) then the known default route is supressed from outgoing RIP updates but accepted on incoming neighbor updates.
INT cjnIpRipIfPoisonMethod	1.3.6.1.4.1.1751.2.43.2.10.3.1.1.7	INTEGER	read-create	RIP Poison Reverse Mode.
INT cjnIpRipIfAuthType	1.3.6.1.4.1.1751.2.43.2.10.3.1.1.8	INTEGER	read-create	RIP authentication type
OCT cjnIpRipIfAuthKey	1.3.6.1.4.1.1751.2.43.2.10.3.1.1.9	OCTET STRING	read-create	RIP authentication key-valid only when cjnIpRipIfAuthType is not set to NONE
cjnIpRipIfStatTable	1.3.6.1.4.1.1751.2.43.2.10.3.2		not-accessible	A list of interface specific RIP Statictics Entries
cjnIpRipIfStatEntry	1.3.6.1.4.1.1751.2.43.2.10.3.2.1		not-accessible	An cajun RIP Interface Statistics instance
IP cjnIpRipIfStatIpAddr	1.3.6.1.4.1.1751.2.43.2.10.3.2.1.1	IpAddress	read-only	The globally unique IP Address identifier for this interface. This number MUST exist in the cjnIpIfTable to be valid.
INT cjnIpRipIfUpdatesSent	1.3.6.1.4.1.1751.2.43.2.10.3.2.1.2	INTEGER	read-write	Total# of RIP updates sent on this if
INT cjnIpRipIfUpdatesRcvd	1.3.6.1.4.1.1751.2.43.2.10.3.2.1.3	INTEGER	read-write	Total# of RIP updates received on this if
INT cjnIpRipIfTrigUpdatesSent	1.3.6.1.4.1.1751.2.43.2.10.3.2.1.4	INTEGER	read-write	Total# of RIP triggered updates sent on this if
INT cjnIpRipIfBadPktRcvd	1.3.6.1.4.1.1751.2.43.2.10.3.2.1.5	INTEGER	read-write	Total# of RIP packets received in error on this if
INT cjnIpRipIfBadRoutesRcvd	1.3.6.1.4.1.1751.2.43.2.10.3.2.1.6	INTEGER	read-write	Total# of bad RIP network routes received in error on this if
cjnIpRipNeighborGroup	1.3.6.1.4.1.1751.2.43.2.10.4
cjnIpRipNeighborTable	1.3.6.1.4.1.1751.2.43.2.10.4.1		not-accessible	A list of RIP Trusted Neighbors
cjnIpRipNeighborEntry	1.3.6.1.4.1.1751.2.43.2.10.4.1.1		not-accessible	A RIP Trusted Neighbor Entry
IP cjnIpRipNeighborIpAddr	1.3.6.1.4.1.1751.2.43.2.10.4.1.1.1	IpAddress	read-only	The IP Address identifier for this neighbor.
ROW cjnIpRipNeighborRowStatus	1.3.6.1.4.1.1751.2.43.2.10.4.1.1.2	RowStatus	read-create	The Status of this entry in the table. Note the available states: active(1), -- Obviously Active on this interface. notInService(2) -- Configured on Interface but disabled. notReady(3), -- Interface entry NOT FULLY configured. createAndGo(4), -- NOT SUPPORTED. createAndWait(5) or destroy(6)

RFC description

Manages RIP (Routing Information Protocol) configuration and statistics for IP networks on Lucent Cajun devices.

Start monitoring Lucent/Avaya Cajun switch/router (proprietary RIP extensions) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RIP-IP-PRIVATE-MIB

What Is RIP-IP-PRIVATE-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description