All MIBs › RFC1289-phivMIB › phivCircuitOrigQueueLimit
phivCircuitOrigQueueLimit
Module: RFC1289-phivMIB
OID (symbolic): RFC1289-phivMIB::phivCircuitOrigQueueLimit
OID (numeric): 1.3.6.1.2.1.18.6.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This parameter indicates the maximum number of originating packets that may be outstanding on this circuit. This does not include route-thru traffic.
What is phivCircuitOrigQueueLimit?
This sets the maximum number of locally originated (not route-through) packets that may be outstanding on this circuit at once. Admins lower it to throttle how much of this circuit's capacity local traffic can consume, reserving room for transit traffic, or raise it for a node that originates heavy local traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.18.6.3 snmpwalk -v2c -c public <target> RFC1289-phivMIB::phivCircuitOrigQueueLimit
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.18.6.3.1 snmpget -v2c -c public <target> RFC1289-phivMIB::phivCircuitOrigQueueLimit.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.18.6.3.1 i <value>
Start monitoring DECnet Phase IV network nodes with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1289-phivMIB::phivCircuitOrigQueueLimit OID value, configure state conditions and alerts, and monitor any DECnet Phase IV network nodes from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.18 | phiv | DECnet-iv |
| 1.3.6.1.2.1.18.6 | circuit | DECnet-iv |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.18.6.3 | phivCircuitOrigQueueLimit | RFC1289-phivMIB |