All MIBs › RFC1289-phivMIB › phivCircuitExecCost
phivCircuitExecCost
Module: RFC1289-phivMIB
OID (symbolic): RFC1289-phivMIB::phivCircuitExecCost
OID (numeric): 1.3.6.1.2.1.18.6.1.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This value represents the routing cost of the circuit. Routing sends messages along the path between two nodes having the smallest cost.
What is phivCircuitExecCost?
This sets the routing cost assigned to this circuit; Routing always prefers the path with the lowest total cost. Admins raise the cost on a slower or less-preferred link so Routing favors a faster parallel path instead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.18.6.1.1.9 snmpwalk -v2c -c public <target> RFC1289-phivMIB::phivCircuitExecCost
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.18.6.1.1.9.1 snmpget -v2c -c public <target> RFC1289-phivMIB::phivCircuitExecCost.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.18.6.1.1.9.1 i <value>
Start monitoring DECnet Phase IV network nodes with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1289-phivMIB::phivCircuitExecCost OID value, configure state conditions and alerts, and monitor any DECnet Phase IV network nodes from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.18 | phiv | DECnet-iv |
| 1.3.6.1.2.1.18.6 | circuit | DECnet-iv |
| 1.3.6.1.2.1.18.6.1 | phivCircuitParametersTable | DECnet-iv |
| 1.3.6.1.2.1.18.6.1.1 | phivCircuitParametersEntry | DECnet-iv |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.18.6.1.1.9 | phivCircuitExecCost | RFC1289-phivMIB |