| OID symbolic | OID numeric | Type | Access | Description |
|---|
| nscHippi | 1.3.6.1.4.1.10.2.2.2.1 | | | |
| INT hippiNumber | 1.3.6.1.4.1.10.2.2.2.1.1 | INTEGER | read-only | An integer value indicating the number of
HippiEntry objects that are in the hippiTable. |
| hippiTable | 1.3.6.1.4.1.10.2.2.2.1.2 | | not-accessible | The HIPPI table of entries |
| hippiEntry | 1.3.6.1.4.1.10.2.2.2.1.2.1 | | not-accessible | An entry in the HIPPI table |
| INT hippiPortNumber | 1.3.6.1.4.1.10.2.2.2.1.2.1.1 | INTEGER | read-only | Unique sequential integer identifying the hippi media.
This is the ifIndex value of the corresponding ifEntry. |
| INT hippiWordSize | 1.3.6.1.4.1.10.2.2.2.1.2.1.2 | INTEGER | read-only | This enumerated value indicates the size of the data
bus associated with this particular hippi media. This
defines whether the interface operates at 800 or 1600
Mbits/s. |
| INT hippiEndPointType | 1.3.6.1.4.1.10.2.2.2.1.2.1.3 | INTEGER | read-only | This enumerated value indicates whether this side
of the hippi simplex connection is operating as a
source or a destination. |
| INT hippiWordCountHigh | 1.3.6.1.4.1.10.2.2.2.1.2.1.4 | INTEGER | read-write | The word counter represents the number of words transferred
through the media. The counter is cleared at power up or reset.
This is the portion of the count above 999,999,999. This object
may be made read-write accessible to allow resetting the counter
from an appropriately configured management station. |
| INT hippiWordCountLow | 1.3.6.1.4.1.10.2.2.2.1.2.1.5 | INTEGER | read-write | The word counter represents the number of words transferred
through the media. The counter is cleared at power up or reset.
This is the portion of the count below 1,000,000,000. This
object may be made read-write accessible to allow resetting
the counter from an appropriately configured management station. |
| INT hippiBurstCountHigh | 1.3.6.1.4.1.10.2.2.2.1.2.1.6 | INTEGER | read-write | Total number of bursts transferred by this media since
power up or reset. This is the portion of the count above
999,999,999. This object may be made read-write accessible
to allow resetting the counter from an appropriately
configured management station. |
| INT hippiBurstCountLow | 1.3.6.1.4.1.10.2.2.2.1.2.1.7 | INTEGER | read-write | Total number of bursts transferred by this media since
power up or reset. This is the portion of the count below
1,000,000,000. This object may be made read-write accessible
to allow resetting the counter from an appropriately
configured management station. |
| INT hippiPacketCountHigh | 1.3.6.1.4.1.10.2.2.2.1.2.1.8 | INTEGER | read-write | The packet count represents the number of packets transferred
on the media. The counter is cleared at power up or reset. This
is the portion of the count above 999,999,999. This object may
be made read-write accessible to allow resetting the counter
from an appropriately configured management station. |
| INT hippiPacketCountLow | 1.3.6.1.4.1.10.2.2.2.1.2.1.9 | INTEGER | read-write | The packet count represents the number of packets transferred
on the media. The counter is cleared at power up or reset. This
is the portion of the count below 1,000,000,000. This object may
be made read-write accessible to allow resetting the counter
from an appropriately configured management station. |
| CTR hippiParityErrors | 1.3.6.1.4.1.10.2.2.2.1.2.1.10 | Counter | read-write | This counter represents the number of data parity errors
that have occurred on the media since power up or reset. Since
the parity bus is one directional from the source to the
destination, this object only has meaning when the
hippiEndPointType indicates this media is a destination end
point. This object may be made read-write accessible to allow
resetting the counter from an appropriately configured management
station. |
| CTR hippiInputPortRejectCount | 1.3.6.1.4.1.10.2.2.2.1.2.1.11 | Counter | read-write | Total number of times that the input port has rejected a
connection attempt due to I-Field parity errors, busy ports,
or invalid source addresses since power up or reset. This object
is only meaningful when the hippiEndPointType indicates this
media is a destination end point. This object may be made read-
write accessible to allow resetting the counter from an
appropriately configured management station. |
| CTR hippiDestRejectCount | 1.3.6.1.4.1.10.2.2.2.1.2.1.12 | Counter | read-write | This counter represents the number of connection requests
that were rejected by a destination end point since power up
or reset. This object may be made read-write accessible to
allow resetting the counter from an appropriately configured
management station. |
| CTR hippiSourceRejectCount | 1.3.6.1.4.1.10.2.2.2.1.2.1.13 | Counter | read-write | This counter represents the number of times that the source
end point dropped the connection request before the connection
to the final destination was completed since power up or reset.
This object may be made read-write accessible to allow resetting
the counter from an appropriately configured management station. |
| CTR hippiDestDisconnectCount | 1.3.6.1.4.1.10.2.2.2.1.2.1.14 | Counter | read-write | This counter represents the number of completed connections
that were terminated by a destination end point since power up
or reset. This object may be made read-write accessible to allow
resetting the counter from an appropriately configured management
station. |
| CTR hippiSourceDisconnectCount | 1.3.6.1.4.1.10.2.2.2.1.2.1.15 | Counter | read-write | This counter represents the number of completed connections
that were terminated normally by the source end point since
power up or reset. This object may be made read-write accessible
to allow resetting the counter from an appropriately configured
management station. |
| OCT hippiLastIField | 1.3.6.1.4.1.10.2.2.2.1.2.1.16 | OCTET STRING | read-only | This data type specifies the HIPPI I-Field address that was
associated with the last operation on the media. If the
hippiEndPointType indicates this is a Destination then the
I-Field gives an indication of how the end point was addressed.
If the media is a Source then the I-Field indicates the last
address that the media attempted to connect to. |
| INT hippiConnectState | 1.3.6.1.4.1.10.2.2.2.1.2.1.17 | INTEGER | read-only | Indicates the current connection state of the media. |
| INT hippiLastErrorType | 1.3.6.1.4.1.10.2.2.2.1.2.1.18 | INTEGER | read-only | Contains the type identifier of the last error that was
encountered on this media. The type identifier and the
hippiLastErrorIField values are intended to be used together
to aid in determining line connection problems. |
| OCT hippiLastErrorIField | 1.3.6.1.4.1.10.2.2.2.1.2.1.19 | OCTET STRING | read-only | This data type specifies the HIPPI I-Field address that
was associated with the last error for this media. The
hippiLastErrorType along with this I-Field information is
intended to help in determining connection problems. If the
hippiEndPointType indicates this is a Destination then the
I-Field gives an indication of how the end point was addressed.
If the media is a Source then the I-Field indicates the last
address that the media attempted to connect to |
| INT hippiInterconnectStatus | 1.3.6.1.4.1.10.2.2.2.1.2.1.20 | INTEGER | read-only | As defined in HIPPI-PH, HIPPI connections have interconnect
signals that are carried to allow endpoints to determine power
on and enable. These signals are also useful in determining
that cables are established correctly. There are two (2) signals
for all connections that are referred to as INTERCONNECT-A.
These signals are used to identify a source to destination as
well as a destination to source connection. In addition, 64 bit
wide connections (1600 MB) have two (2) additional signals that
are referred to as INTERCONNECT-B. These are exactly the same
as the INTERCONNECT-A signals but are carried on the second set
of cables that make up the 64 bit connection.
These signals are encoded into the lowest order four (4) bits
of the hippiInterconnectStatus object as follows:
0 0 0 1 INTERCONNECT-A Source to Destination (1)
0 0 1 0 INTERCONNECT-A Destination to Source (2)
0 1 0 0 INTERCONNECT-B Source to Destination (4)
1 0 0 0 INTERCONNECT-B Destination to Source (8) |
