All MIBs › RDN-PKTCABLE-GROUP-MIB
Organization: Motorola
Last Updated: 2008-10-06
Category: DOCSIS and Cable
Description: Manages PacketCable multimedia service flow groups and QoS gate configuration on Motorola BSR CMTS platforms.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is RDN-PKTCABLE-GROUP-MIB?
RDN-PKTCABLE-GROUP-MIB is a Motorola-specific MIB module that manages PacketCable Dynamic Quality of Service (DQoS) service flow groups and QoS gate configuration on Motorola BSR (Broadband Services Router) CMTS platforms used in cable broadband networks. It exposes configuration and status data for the COPS (Common Open Policy Service) protocol session used between the CMTS and the PacketCable policy server, including timers, client parameters, and trap enable flags. The MIB is primarily used to monitor the software-level status of the COPS/DQoS signaling subsystem, specifically the COPS session state, timer expirations (T0, T1, T3, T6), and whether event/notification traps are enabled, letting an operator detect signaling failures or misconfiguration before they affect voice/video QoS provisioning. It builds on and depends on the PacketCable/PacketCable MultiMedia specifications and the underlying COPS protocol standard, so its objects are meaningful only in that architectural context. This MIB is typically deployed by cable MSOs managing Motorola BSR CMTS headend equipment supporting PacketCable-based VoIP/multimedia services, and operators typically complete an RDN-PKTCABLE-GROUP-MIB download from Motorola/Arris archives to compile it into their NMS.
IPNetwork Monitor allows you to monitor SNMP objects defined in RDN-PKTCABLE-GROUP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Motorola BSR CMTS (cable headend)
Monitoring Examples
An operator polling rdnPktDQoSCOPSStatus can determine whether the COPS connection between the CMTS and the policy server (identified by rdnPktDQoSCMTSIp and rdnPktDQoSPEPID) is currently up or down. Monitoring rdnPktDQoST1Timer and rdnPktDQoST3Timer values alongside rdnPktDQoSCopsTrapEnable helps detect repeated COPS keepalive/reconnect timer expirations, indicating a flapping or failed policy server connection. If rdnPktDQoSResReqTrapEnable is set and reservation request traps start firing frequently, it signals a QoS gate provisioning problem affecting subscriber service flows.
What Can Be Monitored
- COPS session status
- COPS timer expirations (T0/T1/T3/T6)
- PacketCable DQoS trap enable state
- CMTS-to-policy-server connectivity
- emergency service trap status
This MIB depends on
Related MIBs
Imported Objects
From RDN-MIB
| riverdelta | MODULE-IDENTITY |
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE |
From SNMPv2-TC
| DisplayString | |
| MacAddress | |
| TEXTUAL-CONVENTION | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| rdnPacketCableGroup | 1.3.6.1.4.1.4981.7 | MIB module for Motorola PacketCable. Copyright (C) 2002, 2008 by Motorola, Inc. All rights reserved. | ||
| rdnPktDQoSConfigGroup | 1.3.6.1.4.1.4981.7.1 | |||
| IP rdnPktDQoSCMTSIp | 1.3.6.1.4.1.4981.7.1.2 | IpAddress | read-write | An IP address can be configured for the CMTS. If that IP address is configured, BSR will only accept a COPS connection destined to that IP address. Example, loop back, HFC or network IP address. |
| STR rdnPktDQoSPEPID | 1.3.6.1.4.1.4981.7.1.3 | DisplayString | read-write | An ASCII string to identify the CMTS. Default - Motorola CMTS. |
| I32 rdnPktDQoSClientAccpTimer | 1.3.6.1.4.1.4981.7.1.4 | Integer32 | read-write | This object specifies the Time that limits the CMTS to wait for the Client Accept from the CMS/GC in milliseconds. |
| I32 rdnPktDQoST0Timer | 1.3.6.1.4.1.4981.7.1.5 | Integer32 | read-write | This object specifies the period of time in seconds that a Gate may be allocated without being authorized. |
| I32 rdnPktDQoST1Timer | 1.3.6.1.4.1.4981.7.1.6 | Integer32 | read-write | This object specifies the time in seconds that may elapse between the authorization and commit. This provisioned value is only used if the T1 value is not provided by the GC/CMS. |
| I32 rdnPktDQoST3Timer | 1.3.6.1.4.1.4981.7.1.7 | Integer32 | read-write | Place holder |
| I32 rdnPktDQoST6Timer | 1.3.6.1.4.1.4981.7.1.8 | Integer32 | read-write | Place holder. |
| INT rdnPktDQoSCopsTrapEnable | 1.3.6.1.4.1.4981.7.1.9 | INTEGER | read-write | Indicates whether the PacketCable COPS connection trap should be generated. If its value is set to enabled(1), then traps are generated. If the value is disabled(2), then traps are not generated. By default, this object has the value disabled(2). |
| INT rdnPktDQoSResReqTrapEnable | 1.3.6.1.4.1.4981.7.1.10 | INTEGER | read-write | Indicates whether the PacketCable Resource Request trap should be generated. If its value is set to enabled(1), then traps are generated. If the value is disabled(2), then traps are not generated. By default, this object has the value disabled(2). |
| INT rdnPktESTrapEnable | 1.3.6.1.4.1.4981.7.1.11 | INTEGER | read-write | Indicates whether the PacketCable ES status trap should be generated. If its value is set to enabled(1), then traps are generated. If the value is disabled(2), then traps are not generated. By default, this object has the value disabled(2). |
| INT rdnPktESEnable | 1.3.6.1.4.1.4981.7.1.12 | INTEGER | read-write | Indicates whether the PacketCable ES feature is enabled. If its value is set to enabled(1), then Packet Cable ES functionality will operate based on the information received in the Gate-Set message from the CMS. If the value is disabled(2), then the Packet Cable ES functionality will not function according to the information received in the Gate-Set message from the CMS. By default, this object has the value enabled(1). |
| INT rdnPktDQoSEmergencyTrapEnable | 1.3.6.1.4.1.4981.7.1.13 | INTEGER | read-write | Indicates whether the PacketCable Emergency Call trap should be generated. If its value is set to enabled(1), then traps are generated. If the value is disabled(2), then traps are not generated. By default, this object has the value disabled(2). |
| INT rdnPktDQoSEmergencyPreemption | 1.3.6.1.4.1.4981.7.1.14 | INTEGER | read-write | Indicates whether the PacketCable Emergency Preemption is disabled or set to a specific option of dropping a normal dqos voice call. If its value is set to most-recent(1), the most-recent normal dqos voice call of that Service Class is dropped when the bandwidth of the Emergency Service Class has maxed out. The Preemption can only occur if that Service Class has 'allowShared' turned on. Otherwise, Preemption can not occur and thus, the high priority call can not be completed. If the value is oldest(2), the oldest normal dqos voice call is dropped. If the value is random, random normal dqos voice call is dropped. By default, this object has the value disabled(0). |
| INT rdnPktEMRKSFailureTrapEnable | 1.3.6.1.4.1.4981.7.1.15 | INTEGER | read-write | Indicates whether the PacketCable EM RKS Failure trap should be generated. If its value is set to enabled(1), then the trap is generated. If the value is disabled(2), then the trap is not generated. By default, this object has the value disabled(2). |
| I32 rdnPktDQoSDscp | 1.3.6.1.4.1.4981.7.1.16 | Integer32 | read-write | The contents of the Differentiated Services Code Point(DSCP) for DQoS. DSCP is intended to supersede the existing definitions of the IPv4 TOS octet and the IPv6 Traffic Class octet. By setting this value, DSCP will apply to all the DQoS traffic IP header. |
| I32 rdnPktMMDscp | 1.3.6.1.4.1.4981.7.1.17 | Integer32 | read-write | The contents of the Differentiated Services Code Point(DSCP) for Multimedia. DSCP is intended to supersede the exsiting definitions of the IPv4 TOS octet and the IPv6 Traffic Class octet. By setting this value, DSCP will apply to all the Multimedia traffic IP header. |
| I32 rdnPktEMDscp | 1.3.6.1.4.1.4981.7.1.18 | Integer32 | read-write | The contents of the Differentiated Services Code Point(DSCP) for Event Message and Electronic Surveillance Call Data Connection(CDC). DSCP is intended to supersede the existing definitions of the IPv4 TOS octet and the IPv6 Traffic Class octet. By setting this value, DSCP will apply to all the Event Message traffic IP header and Electronic Surveillance Call Data Connection traffic IP header. |
| I32 rdnPktESCccDscp | 1.3.6.1.4.1.4981.7.1.19 | Integer32 | read-write | The contents of the Differentiated Services Code Point(DSCP) for Electronic Surveillance Call Content Connection(CCC). DSCP is intended to supersede the existing definitions of the IPv4 TOS octet and the IPv6 Traffic Class octet. By setting this value, DSCP will apply to all the Electronic Surveillance Call Content Connection traffic IP header. |
| rdnGateStatsTable | 1.3.6.1.4.1.4981.7.2 | not-accessible | This table provide PacketCable statistics of DQoS gate. | |
| rdnGateStatsEntry | 1.3.6.1.4.1.4981.7.2.1 | not-accessible | Each entry provides a set of statistics objects for DQoS gate. | |
| I32 rdnGateId | 1.3.6.1.4.1.4981.7.2.1.1 | Integer32 | not-accessible | This attribute is the identifier for allocated gate. |
| INT rdnGateStatsState | 1.3.6.1.4.1.4981.7.2.1.2 | INTEGER | read-only | This attribute describes current state Idle(0), Start(1), Allocated(2), Authorized(3), Reserved(4), RemoteCommitted(5), LocalCommitted(6), Committed(7). |
| IP rdnGateStatsSubscriberIP | 1.3.6.1.4.1.4981.7.2.1.3 | IpAddress | read-only | This attribute describes the IP address of MTA requesting the gate. Issue:(IPV4 ONLY) |
| IP rdnGateStatsRKSPrimaryAddr | 1.3.6.1.4.1.4981.7.2.1.4 | IpAddress | read-only | This attribute describes Primary Record Keeping Server's IP address, the record keeper to whom event records are sent. |
| I32 rdnGateStatsRKSPrimaryPort | 1.3.6.1.4.1.4981.7.2.1.5 | Integer32 | read-only | This attribute describes Primary Record Keeping Server Port, the port number for event records to be sent. |
| IP rdnGateStatsRKSSecondaryAddr | 1.3.6.1.4.1.4981.7.2.1.6 | IpAddress | read-only | This attribute describes Secondary Record Keeping Server's IP address, the record keeper to whom event records are sent. |
| I32 rdnGateStatsRKSSecondaryPort | 1.3.6.1.4.1.4981.7.2.1.7 | Integer32 | read-only | This attribute describes Secondary Record Keeping Server Port, the port number for event records to be sent. |
| I32 rdnGateStatsEventFlag | 1.3.6.1.4.1.4981.7.2.1.8 | Integer32 | read-only | 0x01 - Batch Processing. If set the CMTS MUST accumulate event records as part of a batch file and send to the Record Keeping Server at periodic intervals. If clear the CMTS MUST send the event records to the Record Keeping Serverin real-time. |
| BCI rdnGateStatsBillingCorrelationID | 1.3.6.1.4.1.4981.7.2.1.9 | BcidDataArray | read-only | This attribute is the identifier assigned by the CMS for all records related to the session. |
| STR rdnGateStatsDurationTime | 1.3.6.1.4.1.4981.7.2.1.10 | DisplayString | read-only | This attribute describes the time that gate was commited. |
| I32 rdnGateStatsSlotNum | 1.3.6.1.4.1.4981.7.2.1.11 | Integer32 | read-only | This attribute describes the CMTS slot number. |
| I32 rdnGateStatsUpSfid | 1.3.6.1.4.1.4981.7.2.1.12 | Integer32 | read-only | This attribute describes the upstream SFID. |
| I32 rdnGateStatsDnSfid | 1.3.6.1.4.1.4981.7.2.1.13 | Integer32 | read-only | This attribute describes the downstream SFID. |
| I32 rdnGateStatsResourceID | 1.3.6.1.4.1.4981.7.2.1.14 | Integer32 | read-only | This attribute is an RSVP object that's used as an identifier for future resource changes. |
| IP rdnGateStatsESCDCAddr | 1.3.6.1.4.1.4981.7.2.1.15 | IpAddress | read-only | This attribute describes the DF's IP address, the DF to whom duplicated event messages are sent. |
| I32 rdnGateStatsESCDCPort | 1.3.6.1.4.1.4981.7.2.1.16 | Integer32 | read-only | This attribute describes the DF's Port for CDC, the port number for duplicated event messages to be sent. |
| I32 rdnGateStatsESFlag | 1.3.6.1.4.1.4981.7.2.1.17 | Integer32 | read-only | If bit 0 is set - DUP-Event. If set the CMTS MUST send a duplicate copy of all event messages relate to this gate to the DF-IP-Address for CDC (rdnGateStatsESCDCAddr). If bit 1 is set the CMTS MUST send a duplicate copy of all packets matching the classifier(s) fo this gate to the DF-IP-Address-for-CCC (rdnGateStatsESCCCAddr). |
| IP rdnGateStatsESCCCAddr | 1.3.6.1.4.1.4981.7.2.1.18 | IpAddress | read-only | This attribute describes the DF's IP address for CCC, the DF to whom duplicated classifier matched packets are sent. |
| I32 rdnGateStatsESCCCPort | 1.3.6.1.4.1.4981.7.2.1.19 | Integer32 | read-only | This attribute describes the DF's Port for CCC, the port number for duplicated classifier matched packets to be sent. |
| I32 rdnGateStatsESCCCId | 1.3.6.1.4.1.4981.7.2.1.20 | Integer32 | read-only | An Identifier used to identify the intercept order to the Law Enforcement Agency. |
| rdnGateSpecTable | 1.3.6.1.4.1.4981.7.3 | not-accessible | This table contains DQoS Gate Specification statistics of upstream and downstream. | |
| rdnGateSpecEntry | 1.3.6.1.4.1.4981.7.3.1 | not-accessible | Each entry contain DQoS Gate Specification statistics of the upstream or downstream. | |
| INT rdnGateDirection | 1.3.6.1.4.1.4981.7.3.1.2 | INTEGER | not-accessible | This attribute describes the direction of the gate specification. |
| I32 rdnGateSpecProtocol | 1.3.6.1.4.1.4981.7.3.1.3 | Integer32 | read-only | This attribute describes the Protocol to match in the IP header. |
| IP rdnGateSpecSourceIP | 1.3.6.1.4.1.4981.7.3.1.4 | IpAddress | read-only | This attribute describes the source IP V4 address, zero for no match. |
| I32 rdnGateSpecSourcePort | 1.3.6.1.4.1.4981.7.3.1.5 | Integer32 | read-only | This attribute describes source port. Zero for no match. |
| IP rdnGateSpecDestIP | 1.3.6.1.4.1.4981.7.3.1.6 | IpAddress | read-only | This attribute describes the destination IP V4 address, zero for no match. |
| I32 rdnGateSpecDestPort | 1.3.6.1.4.1.4981.7.3.1.7 | Integer32 | read-only | This attribute describes destination port. Zero for no match. |
| I32 rdnGateSpecServiceFlowID | 1.3.6.1.4.1.4981.7.3.1.8 | Integer32 | read-only | This attribute describes the service flow ID that maps to the Gate. This value could be zero if a Gate is viewed prior to a SFID being assigned to the Gate. |
| INT rdnGateSpecFlags | 1.3.6.1.4.1.4981.7.3.1.9 | INTEGER | read-only | autoCommit(1), resources Commit immediately upon reservation. commitNotAllowed(2), CMTS ignores any COMMIT messages for the gate. |
| INT rdnGateSpecSessionClass | 1.3.6.1.4.1.4981.7.3.1.10 | INTEGER | read-only | This attribute identifies the proper admission control policy or parameters to be applied for the gate. unspecified (255), normalPriority (1), highPriority (2). |
| I32 rdnGateSpecDiffServCode | 1.3.6.1.4.1.4981.7.3.1.11 | Integer32 | read-only | This attribute describes Differentiated Services Code Point. |
| I32 rdnGateSpecT1Timer | 1.3.6.1.4.1.4981.7.3.1.12 | Integer32 | read-only | This attribute describes Gate Transition timer in seconds, the time limit between authorization and a commit. |
| I32 rdnGateSpecTokenBuckRate | 1.3.6.1.4.1.4981.7.3.1.13 | Integer32 | read-only | Token Bucket Rate, (r) 32 bit IEEE floating point number used in Bandwidth Calculations. Specifies the token bucket that the traffic conforms to. Part of TSpec. |
| I32 rdnGateSpecBuckSize | 1.3.6.1.4.1.4981.7.3.1.14 | Integer32 | read-only | Token Bucket Size (b) 32 bit IEEE floating point number used in Bandwidth Calculations. Specifies the token bucket that the traffic conforms ot. Part of TSpec. |
| I32 rdnGateSpecPeakDataRate | 1.3.6.1.4.1.4981.7.3.1.15 | Integer32 | read-only | Peak Data Rate (p) 32 bit IEEE floating point number used in Bandwidth Calculations. Specifies the Peak Data Rate at which the source sends traffic. Part of TSpec. |
| I32 rdnGateSpecMinPoliceUnit | 1.3.6.1.4.1.4981.7.3.1.16 | Integer32 | read-only | Minimum Policed Unit (m) 32 bit integer. The smallest packet size that the source generates, if asmaller packet is sent, it will count as a packet of size m for the purpose fo policing. Part of TSpec. |
| I32 rdnGateSpecMaxPacketSize | 1.3.6.1.4.1.4981.7.3.1.17 | Integer32 | read-only | Maximum Packet Size (M) 32 bit integer. Maximum packet size (including IP and higher layer headers) that are generated by the source. Part of TSpec. |
| I32 rdnGateSpecReserveRate | 1.3.6.1.4.1.4981.7.3.1.18 | Integer32 | read-only | Rate (R) 32 bit IEEE floating point integer. The amount of bandwidth allocated to the flow. Must be greater than or equal to (r) from the TSpec. Part of RSpec. |
| I32 rdnGateSlackTerm | 1.3.6.1.4.1.4981.7.3.1.19 | Integer32 | read-only | Slack Term (S) 32 bit integer. Delay Bound part of RSpec. |
| rdnPktCMSIpConfigTable | 1.3.6.1.4.1.4981.7.4 | not-accessible | This table contain the IP address list of CMS/GC configuration. | |
| rdnPktCMSIpConfigEntry | 1.3.6.1.4.1.4981.7.4.1 | not-accessible | List of IP addresses for CMS/GC. | |
| I32 rdnPktCMSIpAddressIndex | 1.3.6.1.4.1.4981.7.4.1.1 | Integer32 | not-accessible | Index to access rdnPktCMSIpAddress. |
| IP rdnPktCMSIpAddress | 1.3.6.1.4.1.4981.7.4.1.2 | IpAddress | read-write | Specifies an IP address of a CMS/GC: If not configured, CMTS accepts any CMS IP Address. NOTE: it is necessary to accept the TCP connection, and then determine if the IP address can be used. If not the connection is closed. |
| rdnPktDQoSStatsTable | 1.3.6.1.4.1.4981.7.6 | not-accessible | This table contains DQoS Gate statistics. Note: Index is equal to COPS Handle plus one. | |
| rdnPktDQoSStatsEntry | 1.3.6.1.4.1.4981.7.6.1 | not-accessible | Each entry contains DQoS Gate statistic data. Note: Index is equal to COPS Handle plus one. | |
| IP rdnPktDQoSIpAddress | 1.3.6.1.4.1.4981.7.6.1.1 | IpAddress | read-only | This entry contains IP address of cms - used for debugging stats |
| I32 rdnPktDQoSCopsHandle | 1.3.6.1.4.1.4981.7.6.1.2 | Integer32 | not-accessible | This entry contains cms handle id. |
| INT rdnPktDQoSCOPSStatus | 1.3.6.1.4.1.4981.7.6.1.3 | INTEGER | read-only | This entry contains cm state. |
| I32 rdnPktDQoSCopsConnected | 1.3.6.1.4.1.4981.7.6.1.4 | Integer32 | read-only | This entry contains statistics of CMS connections. |
| I32 rdnPktDQoSCopsTerminated | 1.3.6.1.4.1.4981.7.6.1.5 | Integer32 | read-only | This entry contains statistics of the statistics of the CMS-CMTS session close. |
| I32 rdnPktDQoSCopsKASent | 1.3.6.1.4.1.4981.7.6.1.6 | Integer32 | read-only | This entry contains the statistics of KA sending to the CMS. |
| I32 rdnPktDQoSCopsKARcvd | 1.3.6.1.4.1.4981.7.6.1.7 | Integer32 | read-only | This entry contains the statistics of KA received . |
| I32 rdnPktDQoSKATimeout | 1.3.6.1.4.1.4981.7.6.1.8 | Integer32 | read-only | This entry contains the statistics of the expiration of the KA timer. |
| I32 rdnPktDQoST0Timeout | 1.3.6.1.4.1.4981.7.6.1.9 | Integer32 | read-only | This entry contains the statistics of the expiration of T0 timer. |
| I32 rdnPktDQoST1Timeout | 1.3.6.1.4.1.4981.7.6.1.10 | Integer32 | read-only | This entry contains the statistics of the expiration of T1 timer. |
| I32 rdnPktDQoSGateAllocCount | 1.3.6.1.4.1.4981.7.6.1.11 | Integer32 | read-only | This entry contains the statistics of DGM_CCM_GATE_ALLOC_CMD message received. |
| I32 rdnPktDQoSGateAllocAckCount | 1.3.6.1.4.1.4981.7.6.1.12 | Integer32 | read-only | This entry contains the statistics of DGM_CCM_GATE_ALLOC_ACK_CMD message sent. |
| I32 rdnPktDQoSGateAllocErrCount | 1.3.6.1.4.1.4981.7.6.1.13 | Integer32 | read-only | This entry contains the statistics of gate allocation error message sent. |
| I32 rdnPktDQoSGateSetCount | 1.3.6.1.4.1.4981.7.6.1.14 | Integer32 | read-only | This entry contains the statistics of DGM_CCM_GATE_SET_CMD message received. |
| I32 rdnPktDQoSGateSetAckCount | 1.3.6.1.4.1.4981.7.6.1.15 | Integer32 | read-only | This entry contains the statistics of DGM_CCM_GATE_SET_ACK_CMD message sent. |
| I32 rdnPktDQoSGateSetErrCount | 1.3.6.1.4.1.4981.7.6.1.16 | Integer32 | read-only | This entry contains the statistics of gate set error message sent. |
| I32 rdnPktDQoSGateDeleteCount | 1.3.6.1.4.1.4981.7.6.1.17 | Integer32 | read-only | This entry contains the statistics of DGM_CCM_GATE_DELETE_CMD message received. |
| I32 rdnPktDQoSGateDeleteAckCount | 1.3.6.1.4.1.4981.7.6.1.18 | Integer32 | read-only | This entry contains the statistics of DGM_CCM_GATE_DELETE_ACK_CMD message sent. |
| I32 rdnPktDQoSGateDeleteErrCount | 1.3.6.1.4.1.4981.7.6.1.19 | Integer32 | read-only | This entry contains the statistics of gate delete error message sent. |
| I32 rdnPktDQoSGateInfoCount | 1.3.6.1.4.1.4981.7.6.1.20 | Integer32 | read-only | This entry contains the statistics of DGM_CCM_GATE_INFO_CMD message received. |
| I32 rdnPktDQoSGateInfoAckCount | 1.3.6.1.4.1.4981.7.6.1.21 | Integer32 | read-only | This entry contains the statistics of DGM_CCM_GATE_INFO_ACK_CMD message sent. |
| I32 rdnPktDQoSGateInfoErrCount | 1.3.6.1.4.1.4981.7.6.1.22 | Integer32 | read-only | This entry contains the statistics of gate info error message sent. |
| I32 rdnPktDQoSGateOpenRcvd | 1.3.6.1.4.1.4981.7.6.1.23 | Integer32 | read-only | This entry contains the statistics of DGM_GSM_GATE_OPEN_MSG_TYPE message received. |
| I32 rdnPktDQoSGateOpenAckSent | 1.3.6.1.4.1.4981.7.6.1.24 | Integer32 | read-only | This entry contains the statistics of DGM_GSM_GATE_OPEN_ACK_MSG message sent. |
| I32 rdnPktDQoSGateOpenErrSent | 1.3.6.1.4.1.4981.7.6.1.25 | Integer32 | read-only | This entry contains the statistics of gate open error message message sent. |
| I32 rdnPktDQoSGateCloseRcvd | 1.3.6.1.4.1.4981.7.6.1.26 | Integer32 | read-only | This entry contains the statistics of DGM_GSM_GATE_CLOSE_MSG received. |
| I32 rdnPktDQoSGateCloseAckSent | 1.3.6.1.4.1.4981.7.6.1.27 | Integer32 | read-only | This entry contains the statistics of DGM_GSM_GATE_CLOSE_ACK_MSG sent. |
| I32 rdnPktDQoSGateCloseErrSent | 1.3.6.1.4.1.4981.7.6.1.28 | Integer32 | read-only | This entry contains the statistics of Gate Close Error message sent. |
| I32 rdnPktDQoSGateOpenSent | 1.3.6.1.4.1.4981.7.6.1.29 | Integer32 | read-only | This entry contains the statistics of DGM_GSM_GATE_OPEN_MSG sent. |
| I32 rdnPktDQoSGateOpenAckRcvd | 1.3.6.1.4.1.4981.7.6.1.30 | Integer32 | read-only | This entry contains the statistics of DGM_GSM_GATE_OPEN_ACK_MSG received. |
| I32 rdnPktDQoSGateOpenErrRcvd | 1.3.6.1.4.1.4981.7.6.1.31 | Integer32 | read-only | This entry contains the statistics of Gate Open Error message received. |
| I32 rdnPktDQoSGateCloseSent | 1.3.6.1.4.1.4981.7.6.1.32 | Integer32 | read-only | This entry contains the statistics of DGM_GSM_GATE_CLOSE_MSG sent. |
| I32 rdnPktDQoSGateCloseAckRcvd | 1.3.6.1.4.1.4981.7.6.1.33 | Integer32 | read-only | This entry contains the statistics of DGM_GSM_GATE_CLOSE_ACK_MSG received. |
| I32 rdnPktDQoSGateCloseErrRcvd | 1.3.6.1.4.1.4981.7.6.1.34 | Integer32 | read-only | This entry contains the statistics of Gate Close Error message received. |
| I32 rdnPktDQoSGateOpenRetries | 1.3.6.1.4.1.4981.7.6.1.35 | Integer32 | read-only | This entry contains the statistics of DGM_GSM_GATE_OPEN_MSG_TYPE sent when T5 expires. |
| I32 rdnPktDQoSGateCloseRetries | 1.3.6.1.4.1.4981.7.6.1.36 | Integer32 | read-only | This entry contains the statistics of DGM_GSM_GATE_CLOSE_MSG sent when T5 expires. |
| I32 rdnPktDQoSGateOpenExhausted | 1.3.6.1.4.1.4981.7.6.1.37 | Integer32 | read-only | This entry contains the statistics of gate message retry exhausted with DGM_GSM_GATE_OPEN_MSG_TYPE. |
| I32 rdnPktDQoSGateCloseExhausted | 1.3.6.1.4.1.4981.7.6.1.38 | Integer32 | read-only | This entry contains the statistics of gate message retry exhausted with DGM_GSM_GATE_CLOSE_MSG. |
| I32 rdnPktDQoSCliOpenSent | 1.3.6.1.4.1.4981.7.6.1.39 | Integer32 | read-only | This entry contains the statistic for Client Opens sent. |
| I32 rdnPktDQoSCliAcceptReceived | 1.3.6.1.4.1.4981.7.6.1.40 | Integer32 | read-only | This entry contains the statistic for Client Accepts received. |
| I32 rdnPktDQoSRequestSent | 1.3.6.1.4.1.4981.7.6.1.41 | Integer32 | read-only | This entry contains the statistic for Requests sent. |
| I32 rdnPktDQoSCliCloseReceived | 1.3.6.1.4.1.4981.7.6.1.42 | Integer32 | read-only | This entry contains the statistic for Client Close received. |
| I32 rdnPktDQoSCliCloseSent | 1.3.6.1.4.1.4981.7.6.1.43 | Integer32 | read-only | This entry contains the statistic for Client Close sent. |
| I32 rdnPktDQoSSsqReceived | 1.3.6.1.4.1.4981.7.6.1.44 | Integer32 | read-only | This entry contains the statistic for SSQs received. |
| I32 rdnPktDQoSSscSent | 1.3.6.1.4.1.4981.7.6.1.45 | Integer32 | read-only | This entry contains the statistic for SSCs sent. |
| I32 rdnPktDQoSDrqSent | 1.3.6.1.4.1.4981.7.6.1.46 | Integer32 | read-only | This entry contains the statistic for DRQs sent. |
| I32 rdnPktDQoST7Timeout | 1.3.6.1.4.1.4981.7.6.1.47 | Integer32 | read-only | This entry contains the statistics of the expiration of T7 timer. |
| I32 rdnPktDQoST8Timeout | 1.3.6.1.4.1.4981.7.6.1.48 | Integer32 | read-only | This entry contains the statistics of the expiration of T8 timer. |
| I32 rdnPktDQoSGateCmDel | 1.3.6.1.4.1.4981.7.6.1.49 | Integer32 | read-only | This entry contains the statistic for Gate CM deleted. |
| I32 rdnPktDQoSGateCmDereg | 1.3.6.1.4.1.4981.7.6.1.50 | Integer32 | read-only | This entry contains the statistic Gate CM de-registered. |
| I32 rdnPktDQoSGateAdminDel | 1.3.6.1.4.1.4981.7.6.1.51 | Integer32 | read-only | This entry contains the statistic for Gate Administrator Delete. |
| I32 rdnPktDQoSGateResReassign | 1.3.6.1.4.1.4981.7.6.1.52 | Integer32 | read-only | This entry contains the statistic for Gate Reservation Reassignment. |
| rdnPktDQoSNotificationObject | 1.3.6.1.4.1.4981.7.7 | |||
| INT rdnPktDQoSCopsReason | 1.3.6.1.4.1.4981.7.7.1 | INTEGER | accessible-for-notify | This entry contains the rdnPktDQoSCopsTrap reason code 1 = The CMTS COPS connection to the CMS/GC is established. specified in the rdnPktDQoSCopsCmsIpAddr field. 2 = Can't establish the COPS connection with the IP address specified in the rdnPktDQoSCopsCmsIpAddr field. 3 = The CMS attempting to make the COPS connection is not authorized to make the connection. The IP address is specified in the rdnPktDQoSCopsCmsIpAddr field. 4 = The CMTS COPS connection to the CMS/GC is closed. The CMTS has received a ClientClose from the CMS/GC. The IP address of the CMS/GC is specified in the rdnPktDQoSCopsCmsIpAddr field. 5 = The CMTS COPS connection to the CMS/GC is disconnected. The connection was administratively closed via a command from the console of the CMTS. The IP address of the CMS/GC is specified in the rdnPktDQoSCopsCmsIpAddr field. 6 = The CMTS has not received a Keep-Alive message from the CMS/GC within the specified KA timer interval. The IP address of the CMS/GC is specified in the rdnPktDQoSCopsCmsIpAddr field. |
| IP rdnPktDQoSCopsCmsIpAddr | 1.3.6.1.4.1.4981.7.7.2 | IpAddress | accessible-for-notify | This entry contains the IP address of the CMS/GC associated with the reason code for the rdnPktDQoSCopsTrap. |
| I32 rdnPktDQoSCopsCmsPortNum | 1.3.6.1.4.1.4981.7.7.3 | Integer32 | accessible-for-notify | This entry contains the TCP port number that the CMS/GC is connected on. This is additional information associated with the reason code for the rdnPktDQoSCopsTrap. |
| I32 rdnPktDQoSCopsCmsHandleId | 1.3.6.1.4.1.4981.7.7.4 | Integer32 | accessible-for-notify | This entry contains the COPS handle ID associated with the connection to the CMS/GC. This is additional information associated with the reason code for the rdnPktDQoSCopsTrap. |
| INT rdnPktDQoSResReqReason | 1.3.6.1.4.1.4981.7.7.5 | INTEGER | accessible-for-notify | This entry contains the rdnPktDQoSResReqTrap reason code 1 = The MTA DSA-REQ has requested more resource than it has been authorized. The MTA is identified by the CM's Mac address as specified in the rdnPktDQoSResReqCmMacAddr field. 2 = The MTA DSA-REQ is requesting resource with an unknown Gate ID. 3 = The MTA DSA-REA is requesting resource without including a Gate ID. 4 = The MTA DSC-REQ has requested more resource than it has been authorized. The MTA is identified by the CM's Mac address as specified in the rdnPktDQoSResReqCmMacAddr field. 5 = The MTA DSC-REQ is requesting resource with an unknown Gate ID. 6 = The MTA DSC-REA is requesting resource without including a Gate ID. |
| MAC rdnPktDQoSCmMacAddr | 1.3.6.1.4.1.4981.7.7.6 | MacAddress | accessible-for-notify | This entry contains the CM's Mac address for the MTA it is associated with. The reason code and this Mac address provide the detailed information for the rdnPktDQoSResReqTrap. |
| INT rdnPktDQoSEmergencyReason | 1.3.6.1.4.1.4981.7.7.7 | INTEGER | accessible-for-notify | This entry contains the rdnPktDQoSEmergencyTrap reason code 1 = Emergency Call is rejected due to insufficient bandwidth. |
| STR rdnPktDQoSClassName | 1.3.6.1.4.1.4981.7.7.8 | DisplayString | accessible-for-notify | An ASCII string to identify the Class Name |
| I32 rdnPktDQoSGateId | 1.3.6.1.4.1.4981.7.7.9 | Integer32 | accessible-for-notify | This attribute is the identifier for allocated gate. Refer to rdnGateId. |
| INT rdnPktDQoSEmergencyPreemptReason | 1.3.6.1.4.1.4981.7.7.10 | INTEGER | accessible-for-notify | This entry contains the rdnPktDQoSEmergencyPreempTrap reason code 1 = Emergency call preempted the most recent DQoS call. 2 = Emergency call preempted the oldest DQoS call. 3 = Emergency call preempted a random DQoS call. |
| rdnPktDQoSNotificationTraps | 1.3.6.1.4.1.4981.7.8 | |||
| rdnPktDQoSNotificationTrapsPrefix | 1.3.6.1.4.1.4981.7.8.0 | |||
| NTF rdnPktDQoSCopsTrap | 1.3.6.1.4.1.4981.7.8.0.1 | A PacketCable COPS connection status change to the CMS/GC has occurred. The reason code and CMS/GC IP address provide the detailed information regarding this trap. | ||
| NTF rdnPktDQoSResReqTrap | 1.3.6.1.4.1.4981.7.8.0.2 | A PacketCable MTA resource request problem has occurred (e.g., a problem while processing the DSA-REQ or DSC-REQ was detected). The reason code, the Gate ID, and the CM Mac address, provide detailed information regarding this trap. | ||
| NTF rdnPktDQoSEmergencyTrap | 1.3.6.1.4.1.4981.7.8.0.3 | A PacketCable Emergency call is rejected. The reason code, and the CM Mac address, the gate direction, the Channel ID, and the Gate Id provide detailed information regarding this trap. | ||
| NTF rdnPktDQoSEmergencyPreemptTrap | 1.3.6.1.4.1.4981.7.8.0.4 | A PacketCable Emergency call is preempted successfully. The reason code, and the CM Mac address, the Service Class Name and the Gate Id provide detailed information regarding this trap. | ||
| rdnPktESNotificationObject | 1.3.6.1.4.1.4981.7.9 | |||
| INT rdnPktESReason | 1.3.6.1.4.1.4981.7.9.1 | INTEGER | accessible-for-notify | This entry contains the rdnPktESTrap reason code 1 = Their was no reply from the DF when attempting to send Duplicated Event messages. |
| IP rdnPktESDFIpAddr | 1.3.6.1.4.1.4981.7.9.2 | IpAddress | accessible-for-notify | This entry contains the IP address of the DF associated with the reason code for the rdnPktESTrap. |
| I32 rdnPktESDFPortNum | 1.3.6.1.4.1.4981.7.9.3 | Integer32 | accessible-for-notify | This entry contains the port number that the DF is connected on. This is additional information associated with the reason code for the rdnPktESTrap. |
| rdnPktESNotificationTraps | 1.3.6.1.4.1.4981.7.10 | |||
| rdnPktESNotificationTrapsPrefix | 1.3.6.1.4.1.4981.7.10.0 | |||
| NTF rdnPktESTrap | 1.3.6.1.4.1.4981.7.10.0.1 | A PacketCable ES failure has occurred. The reason code, DF IP address and port provide the detailed information regarding this trap. | ||
| rdnPktRKSNotificationObject | 1.3.6.1.4.1.4981.7.11 | |||
| INT rdnPktRKSReason | 1.3.6.1.4.1.4981.7.11.1 | INTEGER | accessible-for-notify | This entry contains the rdnPktRKSTrap reason code 1 = RKS communications failure. Primary and secondary RKS retries exhausted. |
| I32 rdnPktRKSTransID | 1.3.6.1.4.1.4981.7.11.2 | Integer32 | accessible-for-notify | This entry contains the event message Transaction ID. This is additional information associated with the reason code for the rdnPktRKSTrap. |
| IP rdnPktRKSIPPrimary | 1.3.6.1.4.1.4981.7.11.3 | IpAddress | accessible-for-notify | This entry contains the IP address of the primary RKS. This is additional information associated with the reason code for the rdnPktRKSTrap. |
| I32 rdnPktRKSPortPrimary | 1.3.6.1.4.1.4981.7.11.4 | Integer32 | accessible-for-notify | This entry contains the TCP port number of the primary RKS. This is additional information associated with the reason code for the rdnPktRKSTrap. |
| IP rdnPktRKSIPSecondary | 1.3.6.1.4.1.4981.7.11.5 | IpAddress | accessible-for-notify | This entry contains the IP address of the secondary RKS. This is additional information associated with the reason code for the rdnPktRKSTrap. |
| I32 rdnPktRKSPortSecondary | 1.3.6.1.4.1.4981.7.11.6 | Integer32 | accessible-for-notify | This entry contains the TCP port number of the secondary RKS. This is additional information associated with the reason code for the rdnPktRKSTrap. |
| INT rdnPktRKSVersionID | 1.3.6.1.4.1.4981.7.11.7 | INTEGER | accessible-for-notify | This entry contains the version ID of the RKS associated with the rdnPktRKSTrap. 1 = Packet Cable 1.0 2 = Packet Cable 1.1 3 = Packet Cable MultiMedia |
| rdnPktRKSNotificationTraps | 1.3.6.1.4.1.4981.7.12 | |||
| rdnPktRKSNotificationTrapsPrefix | 1.3.6.1.4.1.4981.7.12.0 | |||
| NTF rdnPktDQoSRKSTrap | 1.3.6.1.4.1.4981.7.12.0.1 | There has been a communication failure to both the primary and secondary Record Keeping Servers. The reason code, the ID of the failed Transaction, primary and secondary RKS IP address and port number, and the RKS version type is provided. |
RFC description
Manages PacketCable QoS, gate resources, and DiffServ code points for Motorola BSR platforms.
Start monitoring Motorola BSR CMTS cable headend (PacketCable DQoS/COPS signaling status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.