RBTWS-AP-STATUS-MIB

All MIBs › RBTWS-AP-STATUS-MIB

Organization: Enterasys Networks

Last Updated: 2008-05-22

Category: Wireless LAN

Description: Reports access point status, radio configuration, and association state for Enterasys RoamAbout wireless LAN controllers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RBTWS-AP-STATUS-MIB?

RBTWS-AP-STATUS-MIB is an Enterasys Networks vendor MIB that reports the operational status of access points (APs) managed by a RoamAbout wireless switch, referred to in the module as the AC (Access Controller). It exposes an AP status table (rbtwsApStatApStatusTable, indexed by serial number, with a MAC-indexed mirror table) carrying AP state, model, hardware/software/boot versions, IP address, uptime, client session count, and manufacturer/CPU info; a per-radio status table (rbtwsApStatRadioStatusTable) with power level, channel number, channel width, MIMO state, and PHY type; and per-SSID radio-service tables mapping BSSID and service-profile names, plus operational rate-set tables (mandatory/disabled rates, beacon/multicast rates) per radio service. This is useful for monitoring AP reachability and radio configuration drift across a wireless deployment — verifying that APs remain in the 'ALIVE' state, that client session counts are within expected bounds, and that configured channel/power settings match policy. It is deployed on Enterasys RoamAbout wireless LAN controllers managing directly- or network-attached access points. Administrators auditing Enterasys wireless deployments can reference the RBTWS-AP-STATUS-MIB MIB definitions when building AP health dashboards.

IPNetwork Monitor allows you to monitor SNMP objects defined in RBTWS-AP-STATUS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Enterasys RoamAbout wireless LAN controllers and managed access points

Monitoring Examples

An operator polls rbtwsApStatApStatusApState and rbtwsApStatApStatusClientSessions for each AP serial number to confirm APs remain in the alive state with expected session counts, then checks rbtwsApStatRadioStatusCurrentPowerLevel against rbtwsApStatRadioStatusMaxPowerLevel; a radio reporting a power level unexpectedly below its configured maximum, combined with a dropping client-session count, would flag a radio or RF environment problem on that AP.

What Can Be Monitored

AP alive/attach state and uptime
AP hardware/software/boot version
client session counts per AP and per radio
radio power level, channel number, and channel width
MIMO state and PHY type per radio
SSID/BSSID-to-service-profile mapping

Imported Objects

From RBTWS-AP-TC

RbtwsApAttachType
RbtwsApFingerprint
RbtwsApNum
RbtwsApPortOrDapNum
RbtwsApSerialNum
RbtwsApState
RbtwsChannelNum
RbtwsPowerLevel
RbtwsRadioChannelWidth
RbtwsRadioConfigState
RbtwsRadioEnable
RbtwsRadioMimoState
RbtwsRadioMode
RbtwsRadioNum
RbtwsRadioRate
RbtwsRadioType

From RBTWS-ROOT-MIB

rbtwsMibs

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using rbtwsApStatRadioOpStatsTxUniPkt OID:

Select an Enterasys RoamAbout wireless LAN controller and managed access point (AP status/radio/SSID reporting) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type rbtwsApStatRadioOpStatsTxUniPkt into the Find box to locate it in the OID tree, then select it and click OK. It reports the number of unicast packets transmitted. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
rbtwsApStatusMib	1.3.6.1.4.1.52.4.15.1.4.5			AP Status objects for Enterasys Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2008 Enterasys Networks, Inc. All rights reserved. This SNMP Management Information Base Specification (Specification) embodies confidential and proprietary intellectual property. This Specification is supplied 'AS IS' and Enterasys Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
rbtwsApStatusObjects	1.3.6.1.4.1.52.4.15.1.4.5.1
rbtwsApStatDataObjects	1.3.6.1.4.1.52.4.15.1.4.5.1.1
U32 rbtwsApStatNumAps	1.3.6.1.4.1.52.4.15.1.4.5.1.1.1	Unsigned32	read-only	Number of APs present and seen by AC (AP in ''ALIVE'' state).
rbtwsApStatApStatusTable	1.3.6.1.4.1.52.4.15.1.4.5.1.1.2		not-accessible	A table describing all the APs currently present and managed by this AC (APs in ''ALIVE'' state). Same data is available indexed by MAC in 'rbtwsApStatApStatusMacTable'.
rbtwsApStatApStatusEntry	1.3.6.1.4.1.52.4.15.1.4.5.1.1.2.1		not-accessible	Information about a particular AP attached to the AC.
RBT rbtwsApStatApStatusSerialNum	1.3.6.1.4.1.52.4.15.1.4.5.1.1.2.1.1	RbtwsApSerialNum	not-accessible	The Serial Number of this AP.
MAC rbtwsApStatApStatusBaseMac	1.3.6.1.4.1.52.4.15.1.4.5.1.1.2.1.2	MacAddress	read-only	The Base MAC address of this AP.
RBT rbtwsApStatApStatusAttachType	1.3.6.1.4.1.52.4.15.1.4.5.1.1.2.1.3	RbtwsApAttachType	read-only	How this AP is attached to the AC (directly or via L2/L3 network).
RBT rbtwsApStatApStatusPortOrDapNum	1.3.6.1.4.1.52.4.15.1.4.5.1.1.2.1.4	RbtwsApPortOrDapNum	read-only	The Port Number if this AP is directly attached, or the CLI-assigned DAP Number if attached via L2/L3 network. Obsoleted by rbtwsApStatApStatusApNum.
RBT rbtwsApStatApStatusApState	1.3.6.1.4.1.52.4.15.1.4.5.1.1.2.1.5	RbtwsApState	read-only	The State of this AP.
STR rbtwsApStatApStatusModel	1.3.6.1.4.1.52.4.15.1.4.5.1.1.2.1.6	DisplayString	read-only	The Model name of this AP.
NUM rbtwsApStatApStatusFingerprint	1.3.6.1.4.1.52.4.15.1.4.5.1.1.2.1.7	RbtwsApFingerprint	read-only	The RSA key fingerprint configured on this AP (binary value: it is the MD5 hash of the public key of the RSA key pair). For directly attached APs the fingerprint is a zero length string.
STR rbtwsApStatApStatusApName	1.3.6.1.4.1.52.4.15.1.4.5.1.1.2.1.8	DisplayString	read-only	The name of this AP, as assigned in AC's CLI; defaults to AP (examples: 'AP01', 'AP22', 'AP333', 'AP4444'); could have been changed from CLI to a meaningful name, for example the location of the AP (example: 'MeetingRoom73').
STR rbtwsApStatApStatusVlan	1.3.6.1.4.1.52.4.15.1.4.5.1.1.2.1.9	DisplayString	read-only	The name of the VLAN associated with this DAP. Only valid for network attached APs, otherwise zero length string.
IP rbtwsApStatApStatusIpAddress	1.3.6.1.4.1.52.4.15.1.4.5.1.1.2.1.10	IpAddress	read-only	The IP Address of this DAP. Only valid for network attached APs, otherwise 0.0.0.0.
U32 rbtwsApStatApStatusUptimeSecs	1.3.6.1.4.1.52.4.15.1.4.5.1.1.2.1.11	Unsigned32	read-only	Time in seconds since this AP's last boot.
STR rbtwsApStatApStatusCpuInfo	1.3.6.1.4.1.52.4.15.1.4.5.1.1.2.1.12	DisplayString	read-only	Information about this AP's CPU.
STR rbtwsApStatApStatusManufacturerId	1.3.6.1.4.1.52.4.15.1.4.5.1.1.2.1.13	DisplayString	read-only	Information about this AP's manufacturer.
U32 rbtwsApStatApStatusRamBytes	1.3.6.1.4.1.52.4.15.1.4.5.1.1.2.1.14	Unsigned32	read-only	The memory capacity of this AP (in bytes).
STR rbtwsApStatApStatusHardwareRev	1.3.6.1.4.1.52.4.15.1.4.5.1.1.2.1.15	DisplayString	read-only	The hardware revision of this AP (e.g. 'A3').
U32 rbtwsApStatApStatusClientSessions	1.3.6.1.4.1.52.4.15.1.4.5.1.1.2.1.16	Unsigned32	read-only	The number of client sessions on this AP.
STR rbtwsApStatApStatusSoftwareVer	1.3.6.1.4.1.52.4.15.1.4.5.1.1.2.1.17	DisplayString	read-only	The software version for this AP.
STR rbtwsApStatApStatusBootVer	1.3.6.1.4.1.52.4.15.1.4.5.1.1.2.1.18	DisplayString	read-only	The boot loader version for this AP.
RBT rbtwsApStatApStatusApNum	1.3.6.1.4.1.52.4.15.1.4.5.1.1.2.1.19	RbtwsApNum	read-only	The administratively assigned AP Number. Obsoletes rbtwsApStatApStatusPortOrDapNum.
rbtwsApStatApStatusMacTable	1.3.6.1.4.1.52.4.15.1.4.5.1.1.3		not-accessible	A table describing all the APs currently present and managed by this AC (APs in ''ALIVE'' state). Same data is available indexed by Serial Number in 'rbtwsApStatApStatusTable'.
rbtwsApStatApStatusMacEntry	1.3.6.1.4.1.52.4.15.1.4.5.1.1.3.1		not-accessible	Information about a particular AP attached to the AC.
MAC rbtwsApStatApStatusMacBaseMac	1.3.6.1.4.1.52.4.15.1.4.5.1.1.3.1.1	MacAddress	not-accessible	The Base MAC address of this AP.
RBT rbtwsApStatApStatusMacSerialNum	1.3.6.1.4.1.52.4.15.1.4.5.1.1.3.1.2	RbtwsApSerialNum	read-only	The Serial Number of this AP.
RBT rbtwsApStatApStatusMacAttachType	1.3.6.1.4.1.52.4.15.1.4.5.1.1.3.1.3	RbtwsApAttachType	read-only	How this AP is attached to the AC (directly or via L2/L3 network).
RBT rbtwsApStatApStatusMacPortOrDapNum	1.3.6.1.4.1.52.4.15.1.4.5.1.1.3.1.4	RbtwsApPortOrDapNum	read-only	The Port Number if this AP is directly attached, or the CLI-assigned DAP Number if attached via L2/L3 network. Obsoleted by rbtwsApStatApStatusMacApNum.
RBT rbtwsApStatApStatusMacApState	1.3.6.1.4.1.52.4.15.1.4.5.1.1.3.1.5	RbtwsApState	read-only	The State of this AP.
STR rbtwsApStatApStatusMacModel	1.3.6.1.4.1.52.4.15.1.4.5.1.1.3.1.6	DisplayString	read-only	The Model name of this AP.
NUM rbtwsApStatApStatusMacFingerprint	1.3.6.1.4.1.52.4.15.1.4.5.1.1.3.1.7	RbtwsApFingerprint	read-only	The RSA key fingerprint configured on this AP (binary value: it is the MD5 hash of the public key of the RSA key pair). For directly attached APs the fingerprint is a zero length string.
STR rbtwsApStatApStatusMacApName	1.3.6.1.4.1.52.4.15.1.4.5.1.1.3.1.8	DisplayString	read-only	The name of this AP, as assigned in AC's CLI; defaults to AP (examples: 'AP01', 'AP22', 'AP333', 'AP4444'); could have been changed from CLI to a meaningful name, for example the location of the AP (example: 'MeetingRoom73').
STR rbtwsApStatApStatusMacVlan	1.3.6.1.4.1.52.4.15.1.4.5.1.1.3.1.9	DisplayString	read-only	The name of the VLAN associated with this DAP. Only valid for network attached APs, otherwise zero length string.
IP rbtwsApStatApStatusMacIpAddress	1.3.6.1.4.1.52.4.15.1.4.5.1.1.3.1.10	IpAddress	read-only	The IP Address of this DAP. Only valid for network attached APs, otherwise 0.0.0.0.
U32 rbtwsApStatApStatusMacUptimeSecs	1.3.6.1.4.1.52.4.15.1.4.5.1.1.3.1.11	Unsigned32	read-only	Time in seconds since this AP's last boot.
STR rbtwsApStatApStatusMacCpuInfo	1.3.6.1.4.1.52.4.15.1.4.5.1.1.3.1.12	DisplayString	read-only	Information about this AP's CPU.
STR rbtwsApStatApStatusMacManufacturerId	1.3.6.1.4.1.52.4.15.1.4.5.1.1.3.1.13	DisplayString	read-only	Information about this AP's manufacturer.
U32 rbtwsApStatApStatusMacRamBytes	1.3.6.1.4.1.52.4.15.1.4.5.1.1.3.1.14	Unsigned32	read-only	The memory capacity of this AP (in bytes).
STR rbtwsApStatApStatusMacHardwareRev	1.3.6.1.4.1.52.4.15.1.4.5.1.1.3.1.15	DisplayString	read-only	The hardware revision of this AP (e.g. 'A3').
U32 rbtwsApStatApStatusMacClientSessions	1.3.6.1.4.1.52.4.15.1.4.5.1.1.3.1.16	Unsigned32	read-only	The number of client sessions on this AP.
STR rbtwsApStatApStatusMacSoftwareVer	1.3.6.1.4.1.52.4.15.1.4.5.1.1.3.1.17	DisplayString	read-only	The software version for this AP.
STR rbtwsApStatApStatusMacBootVer	1.3.6.1.4.1.52.4.15.1.4.5.1.1.3.1.18	DisplayString	read-only	The boot loader version for this AP.
RBT rbtwsApStatApStatusMacApNum	1.3.6.1.4.1.52.4.15.1.4.5.1.1.3.1.19	RbtwsApNum	read-only	The administratively assigned AP Number. Obsoletes rbtwsApStatApStatusMacPortOrDapNum.
rbtwsApStatRadioStatusTable	1.3.6.1.4.1.52.4.15.1.4.5.1.1.4		not-accessible	A table describing the radios on all the APs currently present and managed by this AC (APs in ''ALIVE'' state). Same data is available indexed by Radio Base MAC in 'rbtwsApStatRadioStatusMacTable'.
rbtwsApStatRadioStatusEntry	1.3.6.1.4.1.52.4.15.1.4.5.1.1.4.1		not-accessible	Information about a particular radio on an AP attached to the AC.
RBT rbtwsApStatRadioStatusApSerialNum	1.3.6.1.4.1.52.4.15.1.4.5.1.1.4.1.1	RbtwsApSerialNum	not-accessible	The Serial Number of the AP containing this radio.
RBT rbtwsApStatRadioStatusRadioNum	1.3.6.1.4.1.52.4.15.1.4.5.1.1.4.1.2	RbtwsRadioNum	not-accessible	The Number of this Radio on the AP.
MAC rbtwsApStatRadioStatusBaseMac	1.3.6.1.4.1.52.4.15.1.4.5.1.1.4.1.3	MacAddress	read-only	The Base MAC address of this radio.
RBT rbtwsApStatRadioStatusEnable	1.3.6.1.4.1.52.4.15.1.4.5.1.1.4.1.4	RbtwsRadioEnable	read-only	The configured mode (enabled/disabled) of this radio. Obsoleted by rbtwsApStatRadioStatusRadioMode.
RBT rbtwsApStatRadioStatusRadioConfigState	1.3.6.1.4.1.52.4.15.1.4.5.1.1.4.1.5	RbtwsRadioConfigState	read-only	The configuration state of this radio (INIT, FAIL, OK).
RBT rbtwsApStatRadioStatusCurrentPowerLevel	1.3.6.1.4.1.52.4.15.1.4.5.1.1.4.1.6	RbtwsPowerLevel	read-only	The Current Power Level of this radio.
RBT rbtwsApStatRadioStatusCurrentChannelNum	1.3.6.1.4.1.52.4.15.1.4.5.1.1.4.1.7	RbtwsChannelNum	read-only	The Current Channel Number of this radio.
U32 rbtwsApStatRadioStatusClientSessions	1.3.6.1.4.1.52.4.15.1.4.5.1.1.4.1.8	Unsigned32	read-only	The number of client sessions on this radio.
RBT rbtwsApStatRadioStatusMaxPowerLevel	1.3.6.1.4.1.52.4.15.1.4.5.1.1.4.1.9	RbtwsPowerLevel	read-only	The Maximum Power Level for this radio, with the current antenna, on the current channel (rbtwsApStatRadioStatusCurrentChannelNum), as constrained by the current regulatory domain.
RBT rbtwsApStatRadioStatusRadioPhyType	1.3.6.1.4.1.52.4.15.1.4.5.1.1.4.1.10	RbtwsRadioType	read-only	The current Physical Type of this radio (typeUnknown, typeA, typeB, typeG).
RBT rbtwsApStatRadioStatusRadioMode	1.3.6.1.4.1.52.4.15.1.4.5.1.1.4.1.11	RbtwsRadioMode	read-only	The configured mode of this radio (enabled/disabled/sentry). Obsoletes rbtwsApStatRadioStatusEnable.
RBT rbtwsApStatRadioStatusRadioChannelWidth	1.3.6.1.4.1.52.4.15.1.4.5.1.1.4.1.12	RbtwsRadioChannelWidth	read-only	The configured Channel Width for this radio (20MHz/40MHz).
RBT rbtwsApStatRadioStatusRadioMimoState	1.3.6.1.4.1.52.4.15.1.4.5.1.1.4.1.13	RbtwsRadioMimoState	read-only	MIMO state of this radio (1x1/2x3/3x3).
rbtwsApStatRadioStatusMacTable	1.3.6.1.4.1.52.4.15.1.4.5.1.1.5		not-accessible	A table describing the radios on all the APs currently present and managed by this AC (APs in ''ALIVE'' state). Same data is available indexed by AP Serial Number and Radio Number in 'rbtwsApStatRadioStatusTable'.
rbtwsApStatRadioStatusMacEntry	1.3.6.1.4.1.52.4.15.1.4.5.1.1.5.1		not-accessible	Information about a particular radio on an AP attached to the AC.
MAC rbtwsApStatRadioStatusMacBaseMac	1.3.6.1.4.1.52.4.15.1.4.5.1.1.5.1.1	MacAddress	not-accessible	The Base MAC address of this radio.
RBT rbtwsApStatRadioStatusMacApSerialNum	1.3.6.1.4.1.52.4.15.1.4.5.1.1.5.1.2	RbtwsApSerialNum	read-only	The Serial Number of the AP containing this radio.
RBT rbtwsApStatRadioStatusMacRadioNum	1.3.6.1.4.1.52.4.15.1.4.5.1.1.5.1.3	RbtwsRadioNum	read-only	The Number of this Radio on the AP.
RBT rbtwsApStatRadioStatusMacEnable	1.3.6.1.4.1.52.4.15.1.4.5.1.1.5.1.4	RbtwsRadioEnable	read-only	The configured mode (enabled/disabled) of this radio. Obsoleted by rbtwsApStatRadioStatusMacRadioMode.
RBT rbtwsApStatRadioStatusMacRadioConfigState	1.3.6.1.4.1.52.4.15.1.4.5.1.1.5.1.5	RbtwsRadioConfigState	read-only	The configuration state of this radio (INIT, FAIL, OK).
RBT rbtwsApStatRadioStatusMacCurrentPowerLevel	1.3.6.1.4.1.52.4.15.1.4.5.1.1.5.1.6	RbtwsPowerLevel	read-only	The Current Power Level of this radio.
RBT rbtwsApStatRadioStatusMacCurrentChannelNum	1.3.6.1.4.1.52.4.15.1.4.5.1.1.5.1.7	RbtwsChannelNum	read-only	The Current Channel Number of this radio.
U32 rbtwsApStatRadioStatusMacClientSessions	1.3.6.1.4.1.52.4.15.1.4.5.1.1.5.1.8	Unsigned32	read-only	The number of client sessions on this radio.
RBT rbtwsApStatRadioStatusMacMaxPowerLevel	1.3.6.1.4.1.52.4.15.1.4.5.1.1.5.1.9	RbtwsPowerLevel	read-only	The Maximum Power Level for this radio, with the current antenna, on the current channel (rbtwsApStatRadioStatusMacCurrentChannelNum), as constrained by the current regulatory domain.
RBT rbtwsApStatRadioStatusMacRadioPhyType	1.3.6.1.4.1.52.4.15.1.4.5.1.1.5.1.10	RbtwsRadioType	read-only	The current Physical Type of this radio (typeUnknown, typeA, typeB, typeG).
RBT rbtwsApStatRadioStatusMacRadioMode	1.3.6.1.4.1.52.4.15.1.4.5.1.1.5.1.11	RbtwsRadioMode	read-only	The configured mode of this radio (enabled/disabled/sentry). Obsoletes rbtwsApStatRadioStatusMacEnable.
RBT rbtwsApStatRadioStatusMacRadioChannelWidth	1.3.6.1.4.1.52.4.15.1.4.5.1.1.5.1.12	RbtwsRadioChannelWidth	read-only	The configured Channel Width for this radio (20MHz/40MHz).
RBT rbtwsApStatRadioStatusMacRadioMimoState	1.3.6.1.4.1.52.4.15.1.4.5.1.1.5.1.13	RbtwsRadioMimoState	read-only	MIMO state of this radio (1x1/2x3/3x3).
rbtwsApStatRadioServiceTable	1.3.6.1.4.1.52.4.15.1.4.5.1.1.6		not-accessible	A table describing the radio services associated with the APs currently present and managed by this AC. Same data is available indexed by BSSID in 'rbtwsApStatRadioServiceMacTable'.
rbtwsApStatRadioServiceEntry	1.3.6.1.4.1.52.4.15.1.4.5.1.1.6.1		not-accessible	Information about a particular service (SSID) on a radio.
RBT rbtwsApStatRadioServApSerialNum	1.3.6.1.4.1.52.4.15.1.4.5.1.1.6.1.1	RbtwsApSerialNum	not-accessible	The Serial Number of the AP containing this radio.
RBT rbtwsApStatRadioServRadioNum	1.3.6.1.4.1.52.4.15.1.4.5.1.1.6.1.2	RbtwsRadioNum	not-accessible	The Number of this Radio on the AP.
STR rbtwsApStatRadioServSsid	1.3.6.1.4.1.52.4.15.1.4.5.1.1.6.1.3	DisplayString	not-accessible	The service/SSID name in use on this radio.
MAC rbtwsApStatRadioServBssid	1.3.6.1.4.1.52.4.15.1.4.5.1.1.6.1.4	MacAddress	read-only	The MAC address (a.k.a. BSSID) of this service/SSID on this radio.
STR rbtwsApStatRadioServServiceProfileName	1.3.6.1.4.1.52.4.15.1.4.5.1.1.6.1.5	DisplayString	read-only	The Name of the Service Profile having this SSID and associated to the (only) radio profile of this radio.
rbtwsApStatRadioServiceMacTable	1.3.6.1.4.1.52.4.15.1.4.5.1.1.7		not-accessible	A table describing the radio services associated with the APs currently present and managed by this AC. Same data is available indexed by AP Serial Number, Radio Number and SSID in 'rbtwsApStatRadioServiceTable'.
rbtwsApStatRadioServiceMacEntry	1.3.6.1.4.1.52.4.15.1.4.5.1.1.7.1		not-accessible	Information about a particular service (SSID) on a radio.
MAC rbtwsApStatRadioServMacBssid	1.3.6.1.4.1.52.4.15.1.4.5.1.1.7.1.1	MacAddress	not-accessible	The MAC address (a.k.a. BSSID) of this service/SSID on this radio.
RBT rbtwsApStatRadioServMacApSerialNum	1.3.6.1.4.1.52.4.15.1.4.5.1.1.7.1.2	RbtwsApSerialNum	read-only	The Serial Number of the AP containing this radio.
RBT rbtwsApStatRadioServMacRadioNum	1.3.6.1.4.1.52.4.15.1.4.5.1.1.7.1.3	RbtwsRadioNum	read-only	The Number of this Radio on the AP.
STR rbtwsApStatRadioServMacSsid	1.3.6.1.4.1.52.4.15.1.4.5.1.1.7.1.4	DisplayString	read-only	The service/SSID name in use on this radio.
STR rbtwsApStatRadioServMacServiceProfileName	1.3.6.1.4.1.52.4.15.1.4.5.1.1.7.1.5	DisplayString	read-only	The Name of the Service Profile having this SSID and associated to the (only) radio profile of this radio.
rbtwsApStatRadioServiceOpRateSetTable	1.3.6.1.4.1.52.4.15.1.4.5.1.1.8		not-accessible	A table describing the radio services associated with the APs currently present and managed by this AC. Same data is available indexed by BSSID in 'rbtwsApStatRadioServiceOpRateSetMacTable'.
rbtwsApStatRadioServiceOpRateSetEntry	1.3.6.1.4.1.52.4.15.1.4.5.1.1.8.1		not-accessible	Information about a particular service (SSID) on a radio.
RBT rbtwsApStatRadioSORSetApSerialNum	1.3.6.1.4.1.52.4.15.1.4.5.1.1.8.1.1	RbtwsApSerialNum	not-accessible	The Serial Number of the AP containing this radio.
RBT rbtwsApStatRadioSORSetRadioNum	1.3.6.1.4.1.52.4.15.1.4.5.1.1.8.1.2	RbtwsRadioNum	not-accessible	The Number of this Radio on the AP.
STR rbtwsApStatRadioSORSetSsid	1.3.6.1.4.1.52.4.15.1.4.5.1.1.8.1.3	DisplayString	not-accessible	The service/SSID name in use on this radio.
RBT rbtwsApStatRadioSORSetMandatory	1.3.6.1.4.1.52.4.15.1.4.5.1.1.8.1.4	RbtwsRadioOpRateSetMandatory	read-only	The Mandatory Rate Set configured for this radio service.
RBT rbtwsApStatRadioSORSetDisabled	1.3.6.1.4.1.52.4.15.1.4.5.1.1.8.1.5	RbtwsRadioOpRateSetDisabled	read-only	The Disabled Rate Set configured for this radio service.
RBT rbtwsApStatRadioSORSetBeacon	1.3.6.1.4.1.52.4.15.1.4.5.1.1.8.1.6	RbtwsRadioOpRateSetSingleValue	read-only	The configured Beacon Rate for this radio service.
RBT rbtwsApStatRadioSORSetMulticast	1.3.6.1.4.1.52.4.15.1.4.5.1.1.8.1.7	RbtwsRadioOpRateSetSingleValue	read-only	The configured Multicast Rate for this radio service.
rbtwsApStatRadioServiceOpRateSetMacTable	1.3.6.1.4.1.52.4.15.1.4.5.1.1.9		not-accessible	A table describing the radio services associated with the APs currently present and managed by this AC. Same data is available indexed by AP Serial Number, Radio Number and SSID in 'rbtwsApStatRadioServiceOpRateSetTable'.
rbtwsApStatRadioServiceOpRateSetMacEntry	1.3.6.1.4.1.52.4.15.1.4.5.1.1.9.1		not-accessible	Information about a particular service (SSID) on a radio.
MAC rbtwsApStatRadioSORSetMacBssid	1.3.6.1.4.1.52.4.15.1.4.5.1.1.9.1.1	MacAddress	not-accessible	The MAC address (a.k.a. BSSID) of this service/SSID on this radio.
RBT rbtwsApStatRadioSORSetMacMandatory	1.3.6.1.4.1.52.4.15.1.4.5.1.1.9.1.2	RbtwsRadioOpRateSetMandatory	read-only	The Mandatory Rate Set configured for this radio service.
RBT rbtwsApStatRadioSORSetMacDisabled	1.3.6.1.4.1.52.4.15.1.4.5.1.1.9.1.3	RbtwsRadioOpRateSetDisabled	read-only	The Disabled Rate Set configured for this radio service.
RBT rbtwsApStatRadioSORSetMacBeacon	1.3.6.1.4.1.52.4.15.1.4.5.1.1.9.1.4	RbtwsRadioOpRateSetSingleValue	read-only	The configured Beacon Rate for this radio service.
RBT rbtwsApStatRadioSORSetMacMulticast	1.3.6.1.4.1.52.4.15.1.4.5.1.1.9.1.5	RbtwsRadioOpRateSetSingleValue	read-only	The configured Multicast Rate for this radio service.
rbtwsApStatRadioOpStatisticsTable	1.3.6.1.4.1.52.4.15.1.4.5.1.1.10		not-accessible	A table providing the Radio Operational Statistics for all radios on all APs attached to this switch. Same data is available indexed by Radio Base MAC in 'rbtwsApStatRadioOpStatisticsMacTable'.
rbtwsApStatRadioOpStatisticsEntry	1.3.6.1.4.1.52.4.15.1.4.5.1.1.10.1		not-accessible	Operational statistics (counters) for a particular radio.
RBT rbtwsApStatRadioOpStatsApSerialNum	1.3.6.1.4.1.52.4.15.1.4.5.1.1.10.1.1	RbtwsApSerialNum	not-accessible	The Serial Number of the AP containing this radio.
RBT rbtwsApStatRadioOpStatsRadioNum	1.3.6.1.4.1.52.4.15.1.4.5.1.1.10.1.2	RbtwsRadioNum	not-accessible	The Number of this Radio on the AP.
C64 rbtwsApStatRadioOpStatsTxUniPktEx	1.3.6.1.4.1.52.4.15.1.4.5.1.1.10.1.3	Counter64	read-only	Number of unicast packets transmitted.
C64 rbtwsApStatRadioOpStatsTxUniOctet	1.3.6.1.4.1.52.4.15.1.4.5.1.1.10.1.4	Counter64	read-only	Total number of octets transmitted in unicast packets.
C64 rbtwsApStatRadioOpStatsTxMultiPkt	1.3.6.1.4.1.52.4.15.1.4.5.1.1.10.1.5	Counter64	read-only	Number of multicast packets transmitted.
C64 rbtwsApStatRadioOpStatsTxMultiOctet	1.3.6.1.4.1.52.4.15.1.4.5.1.1.10.1.6	Counter64	read-only	Total number of octets transmitted in multicast packets.
C64 rbtwsApStatRadioOpStatsRxPkt	1.3.6.1.4.1.52.4.15.1.4.5.1.1.10.1.7	Counter64	read-only	Number of packets received.
C64 rbtwsApStatRadioOpStatsRxOctet	1.3.6.1.4.1.52.4.15.1.4.5.1.1.10.1.8	Counter64	read-only	Total number of octets received.
C64 rbtwsApStatRadioOpStatsUndcrptPkt	1.3.6.1.4.1.52.4.15.1.4.5.1.1.10.1.9	Counter64	read-only	Number of undecrypted packets.
C64 rbtwsApStatRadioOpStatsUndcrptOctet	1.3.6.1.4.1.52.4.15.1.4.5.1.1.10.1.10	Counter64	read-only	Total number of octets in undecrypted packets.
C64 rbtwsApStatRadioOpStatsPhyErr	1.3.6.1.4.1.52.4.15.1.4.5.1.1.10.1.11	Counter64	read-only	Number of Physical Errors occurred.
C32 rbtwsApStatRadioOpStatsResetCount	1.3.6.1.4.1.52.4.15.1.4.5.1.1.10.1.12	Counter32	read-only	Number of reset operations for this radio.
C32 rbtwsApStatRadioOpStatsAutoTuneChannelChangeCount	1.3.6.1.4.1.52.4.15.1.4.5.1.1.10.1.13	Counter32	read-only	Number of Channel Changes, in Auto-Tuning mode only, since the AP containing this radio became operational. Note that manual channel changes are not counted.
C32 rbtwsApStatRadioOpStatsTxRetriesCount	1.3.6.1.4.1.52.4.15.1.4.5.1.1.10.1.14	Counter32	read-only	Number of Transmission Retries.
G32 rbtwsApStatRadioOpStatsUserSessions	1.3.6.1.4.1.52.4.15.1.4.5.1.1.10.1.15	Gauge32	read-only	Number of client sessions using this radio at the current moment.
I32 rbtwsApStatRadioOpStatsNoiseFloor	1.3.6.1.4.1.52.4.15.1.4.5.1.1.10.1.16	Integer32	read-only	Noise Floor in dBm.
rbtwsApStatRadioOpStatisticsMacTable	1.3.6.1.4.1.52.4.15.1.4.5.1.1.11		not-accessible	A table providing the Radio Operational Statistics for all radios on all APs attached to this switch. Same data is available indexed by AP Serial Number and Radio Number in 'rbtwsApStatRadioOpStatisticsTable'.
rbtwsApStatRadioOpStatisticsMacEntry	1.3.6.1.4.1.52.4.15.1.4.5.1.1.11.1		not-accessible	Operational statistics (counters) for a particular radio.
MAC rbtwsApStatRadioOpStatsMacBaseMac	1.3.6.1.4.1.52.4.15.1.4.5.1.1.11.1.1	MacAddress	not-accessible	The Base MAC address of this radio.
C64 rbtwsApStatRadioOpStatsMacTxUniPkt	1.3.6.1.4.1.52.4.15.1.4.5.1.1.11.1.2	Counter64	read-only	Number of unicast packets transmitted.
C64 rbtwsApStatRadioOpStatsMacTxUniOctet	1.3.6.1.4.1.52.4.15.1.4.5.1.1.11.1.3	Counter64	read-only	Total number of octets transmitted in unicast packets.
C64 rbtwsApStatRadioOpStatsMacTxMultiPkt	1.3.6.1.4.1.52.4.15.1.4.5.1.1.11.1.4	Counter64	read-only	Number of multicast packets transmitted.
C64 rbtwsApStatRadioOpStatsMacTxMultiOctet	1.3.6.1.4.1.52.4.15.1.4.5.1.1.11.1.5	Counter64	read-only	Total number of octets transmitted in multicast packets.
C64 rbtwsApStatRadioOpStatsMacRxPkt	1.3.6.1.4.1.52.4.15.1.4.5.1.1.11.1.6	Counter64	read-only	Number of packets received.
C64 rbtwsApStatRadioOpStatsMacRxOctet	1.3.6.1.4.1.52.4.15.1.4.5.1.1.11.1.7	Counter64	read-only	Total number of octets received.
C64 rbtwsApStatRadioOpStatsMacUndcrptPkt	1.3.6.1.4.1.52.4.15.1.4.5.1.1.11.1.8	Counter64	read-only	Number of undecrypted packets.
C64 rbtwsApStatRadioOpStatsMacUndcrptOctet	1.3.6.1.4.1.52.4.15.1.4.5.1.1.11.1.9	Counter64	read-only	Total number of octets in undecrypted packets.
C64 rbtwsApStatRadioOpStatsMacPhyErr	1.3.6.1.4.1.52.4.15.1.4.5.1.1.11.1.10	Counter64	read-only	Number of Physical Errors occurred.
C32 rbtwsApStatRadioOpStatsMacResetCount	1.3.6.1.4.1.52.4.15.1.4.5.1.1.11.1.11	Counter32	read-only	Number of reset operations for this radio.
C32 rbtwsApStatRadioOpStatsMacAutoTuneChannelChangeCount	1.3.6.1.4.1.52.4.15.1.4.5.1.1.11.1.12	Counter32	read-only	Number of Channel Changes, in Auto-Tuning mode only, since the AP containing this radio became operational. Note that manual channel changes are not counted.
C32 rbtwsApStatRadioOpStatsMacTxRetriesCount	1.3.6.1.4.1.52.4.15.1.4.5.1.1.11.1.13	Counter32	read-only	Number of Transmission Retries.
G32 rbtwsApStatRadioOpStatsMacUserSessions	1.3.6.1.4.1.52.4.15.1.4.5.1.1.11.1.14	Gauge32	read-only	Number of client sessions using this radio at the current moment.
I32 rbtwsApStatRadioOpStatsMacNoiseFloor	1.3.6.1.4.1.52.4.15.1.4.5.1.1.11.1.15	Integer32	read-only	Noise Floor in dBm.
rbtwsApStatRadioRateOpStatisticsTable	1.3.6.1.4.1.52.4.15.1.4.5.1.1.12		not-accessible	A table providing the Radio Operational Statistics per transmission Rate for all radios on all APs attached to this switch. Same data is available indexed by Radio Base MAC and Data Transmission Rate in 'rbtwsApStatRadioRateOpStatisticsMacTable'.
rbtwsApStatRadioRateOpStatisticsEntry	1.3.6.1.4.1.52.4.15.1.4.5.1.1.12.1		not-accessible	Operational statistics (counters) for a particular data transmission rate on a particular radio.
RBT rbtwsApStatRadioRateOpStatsApSerialNum	1.3.6.1.4.1.52.4.15.1.4.5.1.1.12.1.1	RbtwsApSerialNum	not-accessible	Table index.
RBT rbtwsApStatRadioRateOpStatsRadioNum	1.3.6.1.4.1.52.4.15.1.4.5.1.1.12.1.2	RbtwsRadioNum	not-accessible	Table index.
RBT rbtwsApStatRadioRateOpStatsRate	1.3.6.1.4.1.52.4.15.1.4.5.1.1.12.1.3	RbtwsRadioRate	not-accessible	Table index.
C64 rbtwsApStatRadioRateOpStatsTxUniPkt	1.3.6.1.4.1.52.4.15.1.4.5.1.1.12.1.4	Counter64	read-only	Number of unicast packets transmitted.
C64 rbtwsApStatRadioRateOpStatsTxUniOctet	1.3.6.1.4.1.52.4.15.1.4.5.1.1.12.1.5	Counter64	read-only	Total number of octets transmitted in unicast packets.
C64 rbtwsApStatRadioRateOpStatsTxMultiPkt	1.3.6.1.4.1.52.4.15.1.4.5.1.1.12.1.6	Counter64	read-only	Number of multicast packets transmitted.
C64 rbtwsApStatRadioRateOpStatsTxMultiOctet	1.3.6.1.4.1.52.4.15.1.4.5.1.1.12.1.7	Counter64	read-only	Total number of octets transmitted in multicast packets.
C64 rbtwsApStatRadioRateOpStatsRxPkt	1.3.6.1.4.1.52.4.15.1.4.5.1.1.12.1.8	Counter64	read-only	Number of packets received.
C64 rbtwsApStatRadioRateOpStatsRxOctet	1.3.6.1.4.1.52.4.15.1.4.5.1.1.12.1.9	Counter64	read-only	Total number of octets received.
C64 rbtwsApStatRadioRateOpStatsUndcrptPkt	1.3.6.1.4.1.52.4.15.1.4.5.1.1.12.1.10	Counter64	read-only	Number of undecrypted packets.
C64 rbtwsApStatRadioRateOpStatsUndcrptOctet	1.3.6.1.4.1.52.4.15.1.4.5.1.1.12.1.11	Counter64	read-only	Total number of octets in undecrypted packets.
C64 rbtwsApStatRadioRateOpStatsPhyErr	1.3.6.1.4.1.52.4.15.1.4.5.1.1.12.1.12	Counter64	read-only	Number of Physical Errors occurred.
rbtwsApStatRadioRateOpStatisticsMacTable	1.3.6.1.4.1.52.4.15.1.4.5.1.1.13		not-accessible	A table providing the Radio Operational Statistics per transmission Rate for all radios on all APs attached to this switch. Same data is available indexed by AP Serial Number, Radio Number and Data Transmission Rate in 'rbtwsApStatRadioRateOpStatisticsTable'.
rbtwsApStatRadioRateOpStatisticsMacEntry	1.3.6.1.4.1.52.4.15.1.4.5.1.1.13.1		not-accessible	Operational statistics (counters) for a particular data transmission rate on a particular radio.
MAC rbtwsApStatRadioRateOpStatsMacBaseMac	1.3.6.1.4.1.52.4.15.1.4.5.1.1.13.1.1	MacAddress	not-accessible	Table index.
RBT rbtwsApStatRadioRateOpStatsMacRate	1.3.6.1.4.1.52.4.15.1.4.5.1.1.13.1.2	RbtwsRadioRate	not-accessible	Table index.
C64 rbtwsApStatRadioRateOpStatsMacTxUniPkt	1.3.6.1.4.1.52.4.15.1.4.5.1.1.13.1.3	Counter64	read-only	Number of unicast packets transmitted.
C64 rbtwsApStatRadioRateOpStatsMacTxUniOctet	1.3.6.1.4.1.52.4.15.1.4.5.1.1.13.1.4	Counter64	read-only	Total number of octets transmitted in unicast packets.
C64 rbtwsApStatRadioRateOpStatsMacTxMultiPkt	1.3.6.1.4.1.52.4.15.1.4.5.1.1.13.1.5	Counter64	read-only	Number of multicast packets transmitted.
C64 rbtwsApStatRadioRateOpStatsMacTxMultiOctet	1.3.6.1.4.1.52.4.15.1.4.5.1.1.13.1.6	Counter64	read-only	Total number of octets transmitted in multicast packets.
C64 rbtwsApStatRadioRateOpStatsMacRxPkt	1.3.6.1.4.1.52.4.15.1.4.5.1.1.13.1.7	Counter64	read-only	Number of packets received.
C64 rbtwsApStatRadioRateOpStatsMacRxOctet	1.3.6.1.4.1.52.4.15.1.4.5.1.1.13.1.8	Counter64	read-only	Total number of octets received.
C64 rbtwsApStatRadioRateOpStatsMacUndcrptPkt	1.3.6.1.4.1.52.4.15.1.4.5.1.1.13.1.9	Counter64	read-only	Number of undecrypted packets.
C64 rbtwsApStatRadioRateOpStatsMacUndcrptOctet	1.3.6.1.4.1.52.4.15.1.4.5.1.1.13.1.10	Counter64	read-only	Total number of octets in undecrypted packets.
C64 rbtwsApStatRadioRateOpStatsMacPhyErr	1.3.6.1.4.1.52.4.15.1.4.5.1.1.13.1.11	Counter64	read-only	Number of Physical Errors occurred.
rbtwsApStatusConformance	1.3.6.1.4.1.52.4.15.1.4.5.1.2
rbtwsApStatusCompliances	1.3.6.1.4.1.52.4.15.1.4.5.1.2.1
rbtwsApStatusCompliance	1.3.6.1.4.1.52.4.15.1.4.5.1.2.1.1			The compliance statement for devices that implement AP Status MIB. This compliance statement was for releases 4.1 and 4.2 of AC (wireless switch) software. This compliance statement is replaced by rbtwsApStatusComplianceRev2.
rbtwsApStatusComplianceRev2	1.3.6.1.4.1.52.4.15.1.4.5.1.2.1.2			The compliance statement for devices that implement AP Status MIB. This compliance statement was for release 5.0 of AC (wireless switch) software. This compliance statement is replaced by rbtwsApStatusComplianceRev3.
rbtwsApStatusComplianceRev3	1.3.6.1.4.1.52.4.15.1.4.5.1.2.1.3			The compliance statement for devices that implement AP Status MIB. This compliance statement was for release 6.0 of AC (wireless switch) software. This compliance statement is replaced by rbtwsApStatusComplianceRev4.
rbtwsApStatusComplianceRev4	1.3.6.1.4.1.52.4.15.1.4.5.1.2.1.4			The compliance statement for devices that implement AP Status MIB. This compliance statement is for releases 6.2 and greater of AC (wireless switch) software.
rbtwsApStatusGroups	1.3.6.1.4.1.52.4.15.1.4.5.1.2.2
rbtwsApStatusCommonGroup	1.3.6.1.4.1.52.4.15.1.4.5.1.2.2.1			Mandatory group of objects implemented to provide AP Status info in releases 4.1 and 4.2 of AC (wireless switch) software. Replaced by rbtwsApStatusScalarsGroup, rbtwsApStatusApStatusTablesGroup, rbtwsApStatusRadioStatusTablesGroup, rbtwsApStatusRadioServiceTablesGroup, rbtwsApStatusRadioServiceOpRateSetTablesGroup, rbtwsApStatusRadioOpStatisticsTablesGroup, rbtwsApStatusRadioOpStatisticsPerRateTablesGroup.
rbtwsApStatusScalarsGroup	1.3.6.1.4.1.52.4.15.1.4.5.1.2.2.2			Group of scalar objects implemented to provide general AP info.
rbtwsApStatusApStatusTablesGroup	1.3.6.1.4.1.52.4.15.1.4.5.1.2.2.3			Group of columnar objects implemented to provide AP Status info in releases 5.0 and 6.0. Replaced by rbtwsApStatusApStatusTablesGroupRev2.
rbtwsApStatusRadioStatusTablesGroup	1.3.6.1.4.1.52.4.15.1.4.5.1.2.2.4			Group of columnar objects implemented to provide Radio Status info in releases 5.0 and 6.0. Replaced by rbtwsApStatusRadioStatusTablesGroupRev2.
rbtwsApStatusRadioServiceTablesGroup	1.3.6.1.4.1.52.4.15.1.4.5.1.2.2.5			Group of columnar objects implemented to provide Radio Service info.
rbtwsApStatusRadioServiceOpRateSetTablesGroup	1.3.6.1.4.1.52.4.15.1.4.5.1.2.2.6			Group of columnar objects implemented to provide the Operational Rate Set per Radio Service.
rbtwsApStatusRadioOpStatisticsTablesGroup	1.3.6.1.4.1.52.4.15.1.4.5.1.2.2.7			Group of columnar objects implemented to provide Radio Operational Statistics.
rbtwsApStatusRadioOpStatisticsPerRateTablesGroup	1.3.6.1.4.1.52.4.15.1.4.5.1.2.2.8			Group of columnar objects implemented to provide Radio Operational Statistics per data transmission Rate.
rbtwsApStatusApStatusVersionsGroup	1.3.6.1.4.1.52.4.15.1.4.5.1.2.2.9			Group of objects implemented to provide AP version info.
rbtwsApStatusApStatusTablesGroupRev2	1.3.6.1.4.1.52.4.15.1.4.5.1.2.2.10			Group of columnar objects implemented to provide AP Status info in releases 6.2 and greater.
rbtwsApStatusRadioStatusMaxPowerPhyTypeGroup	1.3.6.1.4.1.52.4.15.1.4.5.1.2.2.11			Group of columnar objects implemented to provide more Radio Status info in releases 6.0 and greater.
rbtwsApStatusRadioStatusTablesGroupRev2	1.3.6.1.4.1.52.4.15.1.4.5.1.2.2.12			Group of columnar objects implemented to provide Radio Status info in releases 6.2 and greater.
rbtwsApStatusRadioStatusWideMimoGroup	1.3.6.1.4.1.52.4.15.1.4.5.1.2.2.13			Group of columnar objects implemented to provide more Radio Status info in releases 7.0 and greater.

RFC description

Manages access point (AP) status and radio information for Enterasys Networks wireless switches, including AP attachment type, state, power levels, and channel configuration.

Start monitoring Enterasys RoamAbout wireless LAN controller and managed access points (AP status/radio/SSID reporting) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RBTWS-AP-STATUS-MIB