All MIBs › RAISECOM-OPTICAL-TRANSCEIVER-MIB › raisecomOpticalTransceiverParamLowWarningThresh
raisecomOpticalTransceiverParamLowWarningThresh
Module: RAISECOM-OPTICAL-TRANSCEIVER-MIB
OID (symbolic): RAISECOM-OPTICAL-TRANSCEIVER-MIB::raisecomOpticalTransceiverParamLowWarningThresh
OID (numeric): 1.3.6.1.4.1.8886.1.18.2.2.1.1.6
Node type: OBJECT-TYPE
Type: OpticalParameterValue
Access: read-only
Description: This object is used to set a low warning threshold on the optical parameter being monitored.
A threshold crossing condition will be indicated if the value given by raisecomOpticalParameterValue goes from above the value of this object to below the value of this object, or if the initial value of raisecomOpticalParameterValue object is lower than the value of this object. For network elements in the status indications, this threshold violation will be indicated in the raisecomOpticalParamAlarmStatus object . This object belongs to xfp/sfp.
What is raisecomOpticalTransceiverParamLowWarningThresh?
The low warning threshold for this monitored optical parameter, a lower-severity trigger than the low alarm threshold that fires when the measured value drops below it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.1.18.2.2.1.1.6 snmpwalk -v2c -c public <target> RAISECOM-OPTICAL-TRANSCEIVER-MIB::raisecomOpticalTransceiverParamLowWarningThresh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.1.18.2.2.1.1.6.1 snmpget -v2c -c public <target> RAISECOM-OPTICAL-TRANSCEIVER-MIB::raisecomOpticalTransceiverParamLowWarningThresh.1
Start monitoring Raisecom metro/access Ethernet switch or media converter, PON/optical equipment (SFP/SFP+ DDM) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAISECOM-OPTICAL-TRANSCEIVER-MIB::raisecomOpticalTransceiverParamLowWarningThresh OID value, configure state conditions and alerts, and monitor any Raisecom metro/access Ethernet switch or media converter, PON/optical equipment (SFP/SFP+ DDM) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8886 | raisecom | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.1 | raisecomAgent | RAISECOM-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8886.1.18 | raisecomOpticalTransceiver | RAISECOM-OPTICAL-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.8886.1.18.2 | raisecomOpticalTransceiverObjects | RAISECOM-OPTICAL-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.8886.1.18.2.2 | raisecomOpticalTransceiverDDMGroup | RAISECOM-OPTICAL-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.8886.1.18.2.2.1 | raisecomOpticalTransceiverDDMTable | RAISECOM-OPTICAL-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.8886.1.18.2.2.1.1 | raisecomOpticalTransceiverDDMEntry | RAISECOM-OPTICAL-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.8886.1.18.2.2.1.1.6 | raisecomOpticalTransceiverParamLowWarningThresh | RAISECOM-OPTICAL-TRANSCEIVER-MIB |