All MIBs › RAISECOM-OPTICAL-TRANSCEIVER-MIB › raisecomOpticalTransceiverParamLowAlarmThresh
raisecomOpticalTransceiverParamLowAlarmThresh
Module: RAISECOM-OPTICAL-TRANSCEIVER-MIB
OID (symbolic): RAISECOM-OPTICAL-TRANSCEIVER-MIB::raisecomOpticalTransceiverParamLowAlarmThresh
OID (numeric): 1.3.6.1.4.1.8886.1.18.2.2.1.1.5
Node type: OBJECT-TYPE
Type: OpticalParameterValue
Access: read-only
Description: This object is used to set a low alarm threshold on the optical parameter being monitored.
An alarm condition will be raised if the value given by raisecomOpticalParameterValue goes from above the value of this object to below the value of this object, or if the initial value of raisecomOpticalParameterValue is lower than the value of this object. This alarm will be indicated in the raisecomOpticalParamAlarmStatus object .. This object belongs to xfp/sfp.
What is raisecomOpticalTransceiverParamLowAlarmThresh?
The low alarm threshold for this monitored optical parameter; an alarm is raised if the measured value drops below this threshold, e.g. flagging a failing laser or a degraded fiber link.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.1.18.2.2.1.1.5 snmpwalk -v2c -c public <target> RAISECOM-OPTICAL-TRANSCEIVER-MIB::raisecomOpticalTransceiverParamLowAlarmThresh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.1.18.2.2.1.1.5.1 snmpget -v2c -c public <target> RAISECOM-OPTICAL-TRANSCEIVER-MIB::raisecomOpticalTransceiverParamLowAlarmThresh.1
Start monitoring Raisecom metro/access Ethernet switch or media converter, PON/optical equipment (SFP/SFP+ DDM) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAISECOM-OPTICAL-TRANSCEIVER-MIB::raisecomOpticalTransceiverParamLowAlarmThresh OID value, configure state conditions and alerts, and monitor any Raisecom metro/access Ethernet switch or media converter, PON/optical equipment (SFP/SFP+ DDM) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8886 | raisecom | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.1 | raisecomAgent | RAISECOM-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8886.1.18 | raisecomOpticalTransceiver | RAISECOM-OPTICAL-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.8886.1.18.2 | raisecomOpticalTransceiverObjects | RAISECOM-OPTICAL-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.8886.1.18.2.2 | raisecomOpticalTransceiverDDMGroup | RAISECOM-OPTICAL-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.8886.1.18.2.2.1 | raisecomOpticalTransceiverDDMTable | RAISECOM-OPTICAL-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.8886.1.18.2.2.1.1 | raisecomOpticalTransceiverDDMEntry | RAISECOM-OPTICAL-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.8886.1.18.2.2.1.1.5 | raisecomOpticalTransceiverParamLowAlarmThresh | RAISECOM-OPTICAL-TRANSCEIVER-MIB |