All MIBs › RAISECOM-OPTICAL-TRANSCEIVER-MIB › raisecomOpticalTransceiverDDM15MinValidIntervals
raisecomOpticalTransceiverDDM15MinValidIntervals
Module: RAISECOM-OPTICAL-TRANSCEIVER-MIB
OID (symbolic): RAISECOM-OPTICAL-TRANSCEIVER-MIB::raisecomOpticalTransceiverDDM15MinValidIntervals
OID (numeric): 1.3.6.1.4.1.8886.1.18.2.2.1.1.10
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This object gives the number of previous 15 minute intervals for which valid performance monitoring data has been stored on the interface.
The value of this object will be n (where n is the maximum number of 15 minute intervals supported at this interface), unless the measurement was (re-)started within the last (nx15) minutes, in which case the value will be the number of previous 15 minute intervals for which the agent has some data.
This object belongs to xfp/sfp.
What is raisecomOpticalTransceiverDDM15MinValidIntervals?
Reports how many of the previous 15-minute performance-monitoring intervals (up to 96, i.e. 24 hours) actually contain valid stored data for this transceiver, which can be fewer than the max right after monitoring starts.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.1.18.2.2.1.1.10 snmpwalk -v2c -c public <target> RAISECOM-OPTICAL-TRANSCEIVER-MIB::raisecomOpticalTransceiverDDM15MinValidIntervals
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.1.18.2.2.1.1.10.1 snmpget -v2c -c public <target> RAISECOM-OPTICAL-TRANSCEIVER-MIB::raisecomOpticalTransceiverDDM15MinValidIntervals.1
Start monitoring Raisecom metro/access Ethernet switch or media converter, PON/optical equipment (SFP/SFP+ DDM) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAISECOM-OPTICAL-TRANSCEIVER-MIB::raisecomOpticalTransceiverDDM15MinValidIntervals OID value, configure state conditions and alerts, and monitor any Raisecom metro/access Ethernet switch or media converter, PON/optical equipment (SFP/SFP+ DDM) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8886 | raisecom | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.1 | raisecomAgent | RAISECOM-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8886.1.18 | raisecomOpticalTransceiver | RAISECOM-OPTICAL-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.8886.1.18.2 | raisecomOpticalTransceiverObjects | RAISECOM-OPTICAL-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.8886.1.18.2.2 | raisecomOpticalTransceiverDDMGroup | RAISECOM-OPTICAL-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.8886.1.18.2.2.1 | raisecomOpticalTransceiverDDMTable | RAISECOM-OPTICAL-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.8886.1.18.2.2.1.1 | raisecomOpticalTransceiverDDMEntry | RAISECOM-OPTICAL-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.8886.1.18.2.2.1.1.10 | raisecomOpticalTransceiverDDM15MinValidIntervals | RAISECOM-OPTICAL-TRANSCEIVER-MIB |