NETGEAR-QOS-BW-MIB

All MIBs › NETGEAR-QOS-BW-MIB

Organization: Netgear

Last Updated: 2005-02-23

Description: NETGEAR-QOS-BW-MIB module

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NETGEAR-QOS-BW-MIB?

NETGEAR-QOS-BW-MIB is a Netgear private MIB covering the switch's Quality of Service (QoS) "Flex" bandwidth package, used to configure QoS bandwidth-related settings on Netgear FASTPATH switches. It would be expected to expose QoS bandwidth configuration parameters such as rate limits or queue bandwidth allocation, though no specific object names were provided in the available source data. It functions primarily as a traffic-shaping/QoS software-configuration MIB rather than a hardware-sensor MIB; without concrete object names, its specific monitorable status parameters cannot be confirmed. It builds on Netgear's broader FASTPATH QoS MIB framework alongside related QoS MIBs. It would be deployed on Netgear FASTPATH switches where NETGEAR-QOS-BW-MIB SNMP monitoring supports administrators managing bandwidth allocation via QoS policy configuration.

IPNetwork Monitor allows you to monitor SNMP objects defined in NETGEAR-QOS-BW-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Netgear FASTPATH-based managed switch

Monitoring Examples

No sample object names were provided for this module, so a concrete polling scenario referencing specific tables or scalars cannot be honestly constructed from the available data. Based on the module description, it likely governs QoS bandwidth allocation (the "Flex" package) on the switch, but the precise object names involved are unconfirmed.

Imported Objects

From NETGEAR-QOS-MIB

agentQOS

MODULE-IDENTITY

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

Counter32
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

RowStatus

How to Use in IPNetwork Monitor

Example using trafficClassAcceptByteCount OID:

Select a Netgear FASTPATH-based managed switch (QoS bandwidth Flex package) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type trafficClassAcceptByteCount into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the byte count of packets accepted by this traffic class. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
agentQOSBandwidth	1.3.6.1.4.1.4526.11.3.1			The MIB definitaions for Quality of Service Flex package.
trafficClassGroup	1.3.6.1.4.1.4526.11.3.1.1
STR trafficClassCreate	1.3.6.1.4.1.4526.11.3.1.1.1	DisplayString	read-write	Set to a non-empty string to create a Traffic Class entry in trafficClassTable.
trafficClassTable	1.3.6.1.4.1.4526.11.3.1.1.2		not-accessible	A table of Traffic Class instances.
trafficClassEntry	1.3.6.1.4.1.4526.11.3.1.1.2.1		not-accessible
I32 trafficClassIndex	1.3.6.1.4.1.4526.11.3.1.1.2.1.1	Integer32	not-accessible	The index of this instance.
STR trafficClassName	1.3.6.1.4.1.4526.11.3.1.1.2.1.2	DisplayString	read-only	The name of the traffic class.
I32 trafficClassIfIndex	1.3.6.1.4.1.4526.11.3.1.1.2.1.3	Integer32	read-write	The IfIndex of the port that this instance is associated with.
I32 trafficClassVlanId	1.3.6.1.4.1.4526.11.3.1.1.2.1.4	Integer32	read-write	The VlanID of the VLAN that this instance is associated with.
I32 trafficClassWeight	1.3.6.1.4.1.4526.11.3.1.1.2.1.5	Integer32	read-write	The weight that this instances has.
I32 trafficClassBandwidthAllocation	1.3.6.1.4.1.4526.11.3.1.1.2.1.6	Integer32	read-write	Index of Bandwidth Allocation entry this traffic class uses.
C32 trafficClassAcceptByteCountEx	1.3.6.1.4.1.4526.11.3.1.1.2.1.7	Counter32	read-only	Byte count of packets accepted by this traffic class.
ROW trafficClassStatus	1.3.6.1.4.1.4526.11.3.1.1.2.1.8	RowStatus	read-write	Status of this instance. active(1) - this traffic class is active destroy(6) - set to this value to delete an instance
bandwidthAllocationGroup	1.3.6.1.4.1.4526.11.3.1.2
STR bandwidthAllocationCreate	1.3.6.1.4.1.4526.11.3.1.2.1	DisplayString	read-write	Set to a non-empty string to create a Bandwidth Allocation entry in bandwidthAllocationTable.
bandwidthAllocationTable	1.3.6.1.4.1.4526.11.3.1.2.2		not-accessible	Table of bandwidth allocation instances.
bandwidthAllocationEntry	1.3.6.1.4.1.4526.11.3.1.2.2.1		not-accessible
I32 bandwidthAllocationIndex	1.3.6.1.4.1.4526.11.3.1.2.2.1.1	Integer32	not-accessible	The index of the traffic class.
STR bandwidthAllocationName	1.3.6.1.4.1.4526.11.3.1.2.2.1.2	DisplayString	read-only	The name of the traffic class.
G32 bandwidthAllocationMinBandwidth	1.3.6.1.4.1.4526.11.3.1.2.2.1.3	Gauge32	read-write	Minimum bandwidth allocated.
G32 bandwidthAllocationMaxBandwidth	1.3.6.1.4.1.4526.11.3.1.2.2.1.4	Gauge32	read-write	Maximum bandwidth allocated.
ROW bandwidthAllocationStatus	1.3.6.1.4.1.4526.11.3.1.2.2.1.5	RowStatus	read-write	Status of this instance. active(1) - this bandwidth allocation is active destroy(6) - set to this value to delete an instance

RFC description

Quality of Service bandwidth management MIB for NETGEAR devices with traffic class and QoS configuration.

Start monitoring Netgear FASTPATH-based managed switch (QoS bandwidth Flex package) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NETGEAR-QOS-BW-MIB

What Is NETGEAR-QOS-BW-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

How to Use in IPNetwork Monitor

RFC description