QLASP-Statistics-MIB

All MIBs › QLASP-Statistics-MIB

Category: Link Aggregation

Description: Provides Broadcom BASP NIC teaming adapter statistics including transmitted/received frames and failover event counts.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is QLASP-Statistics-MIB?

QLASP-Statistics-MIB is a vendor MIB from Broadcom (formerly QLogic) covering the BASP NIC teaming/link-aggregation software used on network adapters. It exposes performance counters for teamed network interfaces, including frame transmission and reception statistics and failover event counts. This makes it useful for monitoring the operational status of network teaming software, revealing link failures, failover events between team members, and abnormal traffic patterns that could indicate a failing NIC or cable. It is a self-contained statistics MIB, likely used alongside standard IF-MIB interface counters for full visibility into a teamed adapter. It is typically deployed on servers using multi-NIC teaming for redundancy or load balancing, particularly in Windows Server environments using Broadcom/QLogic adapters, and administrators can download the QLASP-Statistics-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in QLASP-Statistics-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Broadcom/QLogic BASP NIC teaming adapter
server network adapter

Monitoring Examples

An administrator would poll the team statistics objects for transmitted and received frame counts on each team member interface and watch the failover event counter for unexpected increments, which would indicate a NIC or link failure triggering an automatic failover. A rising error or failover count alongside a drop in throughput on one team member would point to a failing physical adapter or cable needing replacement. No specific sample object names were available for this MIB, so table/column names are described generally rather than confirmed.

What Can Be Monitored

transmitted frame count
received frame count
failover event count
team member link status

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
qlogic	1.3.6.1.4.1.3873
enet	1.3.6.1.4.1.3873.1
qlasp	1.3.6.1.4.1.3873.1.2
qlaspStat	1.3.6.1.4.1.3873.1.2.2
qlaspTeamStat	1.3.6.1.4.1.3873.1.2.2.1
INT btsTeamNumber	1.3.6.1.4.1.3873.1.2.2.1.1	INTEGER	read-only	The number of loadbalance teams present on this system.
btsTeamTable	1.3.6.1.4.1.3873.1.2.2.1.2		not-accessible	A list of team entries. The number of teams is given by the value of teamNumber.
btsTeamEntry	1.3.6.1.4.1.3873.1.2.2.1.2.1		not-accessible	An entry containing team statistics objects at the target system.
INT btsTeamIndex	1.3.6.1.4.1.3873.1.2.2.1.2.1.1	INTEGER	not-accessible	An unique value for each team. The value for each team must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
STR btsTeamName	1.3.6.1.4.1.3873.1.2.2.1.2.1.2	DisplayString	read-only	A textual string containing name of the team
INT btsPhyNumber	1.3.6.1.4.1.3873.1.2.2.1.2.1.3	INTEGER	read-only	Number of physical adapters in the team
INT btsVirNumber	1.3.6.1.4.1.3873.1.2.2.1.2.1.4	INTEGER	read-only	Number of virtual adapters in the team
CTR btsPacketSends	1.3.6.1.4.1.3873.1.2.2.1.2.1.5	Counter	read-only	number of send packets that are forwarded to the team members, derived from physical adapter statistics.
CTR btsPacketSendDiscardeds	1.3.6.1.4.1.3873.1.2.2.1.2.1.6	Counter	read-only	number of send packets that are discarded, derived from physical adapter statistics.
CTR btsPacketSendQueueds	1.3.6.1.4.1.3873.1.2.2.1.2.1.7	Counter	read-only	number of send packets queued by driver waiting for resource
CTR btsPacketRecvs	1.3.6.1.4.1.3873.1.2.2.1.2.1.8	Counter	read-only	number of receive packets that are indicated to upper layer, derived from physical adapter statistics.
CTR btsPacketRecvDiscardeds	1.3.6.1.4.1.3873.1.2.2.1.2.1.9	Counter	read-only	number of receive packets discarded, derived from physical adapter statistics.
CTR btsLinkPacketsSents	1.3.6.1.4.1.3873.1.2.2.1.2.1.10	Counter	read-only	For LiveLink feature: Number of link packets sent across all adapters for the team - Expressed as a quantity.
CTR btsLinkPacketsRetrieds	1.3.6.1.4.1.3873.1.2.2.1.2.1.11	Counter	read-only	For LiveLink feature: The number of retry packets sent across all adapters for the team - Expressed as a quantity.
qlaspPhyAdapterStat	1.3.6.1.4.1.3873.1.2.2.2
INT btsPhyAdapterNumber	1.3.6.1.4.1.3873.1.2.2.2.1	INTEGER	read-only	Number of physical adapters presented in the physical adapter table.
btsPhyAdapterStatTable	1.3.6.1.4.1.3873.1.2.2.2.2		not-accessible	The phyMember tables contain the physical adapter members of loadbalance teams.
btsPhyAdapterStatEntry	1.3.6.1.4.1.3873.1.2.2.2.2.1		not-accessible	A team entry containing objects at the target system.
INT btspTeamIndex	1.3.6.1.4.1.3873.1.2.2.2.2.1.1	INTEGER	not-accessible	An unique value for each team.
INT btspAdapterIndex	1.3.6.1.4.1.3873.1.2.2.2.2.1.2	INTEGER	not-accessible	A value for each adapter within a team.
STR btspAdapterDesc	1.3.6.1.4.1.3873.1.2.2.2.2.1.3	DisplayString	read-only	A textual string containing name of the physical member
CTR btspPacketSends	1.3.6.1.4.1.3873.1.2.2.2.2.1.4	Counter	read-only	number of send request completed by miniport .
CTR btspPacketSendDiscardeds	1.3.6.1.4.1.3873.1.2.2.2.2.1.5	Counter	read-only	number of send request discarded.
CTR btspPacketRecvs	1.3.6.1.4.1.3873.1.2.2.2.2.1.6	Counter	read-only	number of receive packets that are indicated to upper layer.
CTR btspPacketRecvDiscardeds	1.3.6.1.4.1.3873.1.2.2.2.2.1.7	Counter	read-only	number of receive packets discarded.
CTR btspLinkPacketsSents	1.3.6.1.4.1.3873.1.2.2.2.2.1.8	Counter	read-only	For LiveLink feature: Number of link packets sent vis the adapters for the team - Expressed as a quantity.
CTR btspLinkPacketsRetrieds	1.3.6.1.4.1.3873.1.2.2.2.2.1.9	Counter	read-only	For LiveLink feature: The number of retry packets sent via the adapters for the team - Expressed as a quantity.
qlaspVirAdapterStat	1.3.6.1.4.1.3873.1.2.2.3
INT btsVirAdapterNumber	1.3.6.1.4.1.3873.1.2.2.3.1	INTEGER	read-only	Number of virtual adapters presented in the virtual adapter table.
btsVirAdapterStatTable	1.3.6.1.4.1.3873.1.2.2.3.2		not-accessible	The phyMember tables contain the physical adapter members of loadbalance teams.
btsVirAdapterStatEntry	1.3.6.1.4.1.3873.1.2.2.3.2.1		not-accessible	A team entry containing objects at the target system.
INT btsvTeamIndex	1.3.6.1.4.1.3873.1.2.2.3.2.1.1	INTEGER	not-accessible	An unique value for each team.
INT btsvAdapterIndex	1.3.6.1.4.1.3873.1.2.2.3.2.1.2	INTEGER	not-accessible	A value for each adapter within a team.
STR btsvAdapterDesc	1.3.6.1.4.1.3873.1.2.2.3.2.1.3	DisplayString	read-only	A textual string containing name of the virtual member
CTR btsvPacketSends	1.3.6.1.4.1.3873.1.2.2.3.2.1.4	Counter	read-only	number of send request completed .
CTR btsvPacketSendQueueds	1.3.6.1.4.1.3873.1.2.2.3.2.1.5	Counter	read-only	number of send request being queued by driver waiting for resource
CTR btsvPacketRecvs	1.3.6.1.4.1.3873.1.2.2.3.2.1.6	Counter	read-only	number of receive indicated to upper layer successfully.

RFC description

QLogic advanced server load balance and VLAN statistics MIB tracking network team and adapter performance metrics.

Start monitoring Broadcom/QLogic BASP NIC teaming adapter, server network adapter (teaming performance counters) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download QLASP-Statistics-MIB

What Is QLASP-Statistics-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description