| OID symbolic | OID numeric | Type | Access | Description |
|---|
| qbVlanMIB | 1.3.6.1.4.1.4323.2.15 | | | This module defines objects for the management of QB's
proprietary VLAN capability. This capability is
based on Policing and Thresholding.
The purpose of the QBVLAN function is
to provide provisioning and monitoring of VLANs
set up by the administrator. |
| qbVlanObjects | 1.3.6.1.4.1.4323.2.15.1 | | | |
| qbVlanConfGroup | 1.3.6.1.4.1.4323.2.15.1.1 | | | |
| VLA qbNextFreeVlanIndex | 1.3.6.1.4.1.4323.2.15.1.1.1 | VlanIndex | read-only | This is the lowest unused vlan index for the system.
The next available value for qbNextFreeVlanIndex of a local
VLAN entry in qbVlanConfTableTable. This will report
values >=4096 if a new Local VLAN may be created or else
the value 0 if this is not possible. |
| I32 qbVlanNumVlans | 1.3.6.1.4.1.4323.2.15.1.1.2 | Integer32 | read-only | The total number of provisioned VLANs. |
| TIK qbVlanConfTableLastUpdate | 1.3.6.1.4.1.4323.2.15.1.1.3 | TimeTicks | read-only | The value of sysUpTime at the time of the last
creation, deletion or modification of an entry in
the qbVlanConfTable.
If the number of entries has been unchanged since the
last re-initialization of the agent,
then this object contains a zero value. |
| qbVlanConfTable | 1.3.6.1.4.1.4323.2.15.1.1.4 | | not-accessible | This table contains the data pertaining to Vlans.
The table contains configuration information for
each VLAN configured into the device.
All entries are permanent and will
be restored after the device is reset. |
| qbVlanConfEntry | 1.3.6.1.4.1.4323.2.15.1.1.4.1 | | not-accessible | Each row provides data for a single vlan. |
| VLA qbVlanConfIndex | 1.3.6.1.4.1.4323.2.15.1.1.4.1.1 | VlanIndex | not-accessible | This is the Vlan index for this VLAN. If the value is between 1 and
4094, it represents an IEEE 802.1Q VLAN-ID with
global scope within a given bridged domain (see VlanId
textual convention). If the value is greater than 4095
then it represents a VLAN with scope local to the
particular agent. Note that for Release 3.0 the
qbVlanConfIndex value ranges between 1 and 4095. |
| STR qbVlanConfName | 1.3.6.1.4.1.4323.2.15.1.1.4.1.2 | DisplayString | read-create | This is the unique user name assigned to this VLAN. |
| INT qbVlanConfSlot | 1.3.6.1.4.1.4323.2.15.1.1.4.1.3 | INTEGER | read-create | This is the slot where this VLAN has been created. |
| QBV qbVlanConfNextPort | 1.3.6.1.4.1.4323.2.15.1.1.4.1.4 | QbVlanPort | read-only | This returns the lowest free VLAN port to be used. |
| ROW qbVlanConfRowstatus | 1.3.6.1.4.1.4323.2.15.1.1.4.1.5 | RowStatus | read-create | The row status column for this Vlan.
This OBJECT can be set to:
createAndGo(4)
destroy(6)
The following values may be read:
active(1)
Setting this object to createAndGo(4) causes the agent
to attempt to create and commit the row based on
the contents of the objects in the row. If all necessary
information is present in the row and the values are
acceptable to the agent, the agent will change the
status to active(1). If any of the necessary objects
are not available, the agent will reject the creation
request.
Setting this object to destroy(6) will remove the corresponding
entry in this table, and disable data traffic. |
| qbVlanPortGroup | 1.3.6.1.4.1.4323.2.15.1.2 | | | |
| TIK qbVlanPortConfTableLastUpdate | 1.3.6.1.4.1.4323.2.15.1.2.1 | TimeTicks | read-only | The value of sysUpTime at the time of the last
creation, deletion or modification of an entry in
the qbVlanConfTable.
If the number of entries has been unchanged since the
last re-initialization of the agent,
then this object contains a zero value. |
| qbVlanPortConfTable | 1.3.6.1.4.1.4323.2.15.1.2.2 | | not-accessible | This table contains the data pertaining to Vlan ports
and their connections. The table contains per port control and status
information for VLAN configuration in the device. |
| qbVlanPortConfEntry | 1.3.6.1.4.1.4323.2.15.1.2.2.1 | | not-accessible | Each row provides data for a single vlan port. |
| QBV qbVlanPortConfPort | 1.3.6.1.4.1.4323.2.15.1.2.2.1.1 | QbVlanPort | not-accessible | This is the Vlan port for this connection end-point. |
| INT qbVlanPortConfPolicing | 1.3.6.1.4.1.4323.2.15.1.2.2.1.2 | INTEGER | read-write | The object is used to enable or disable policing
policy on a given port. |
| QBA qbVlanPortConfEncapsulation | 1.3.6.1.4.1.4323.2.15.1.2.2.1.3 | QbAtmAal5EncapsType | read-write | The type of data encapsulation used over
the AAL5 SSCS layer. The definitions reference
RFC 1483 Multiprotocol Encapsulation
over ATM AAL5 and to the ATM Forum
LAN Emulation specification. |
| INT qbVlanPortConfAdmitFrameTypes | 1.3.6.1.4.1.4323.2.15.1.2.2.1.4 | INTEGER | read-write | When this is admitOnlyVlanTagged the device will
discard any untagged frames or priority-tagged frames
received on this port. When admitAll, untagged frames
or priority-tagged frames received will be accepted and
tagged with the VLAN id. This applies to the traffic from
the GigE card to the backplane only. |
| INT qbVlanPortConfTagging | 1.3.6.1.4.1.4323.2.15.1.2.2.1.5 | INTEGER | read-write | When this value is set to disable, the VLAN tags
will be removed from the outgoing packets. This applies
to the traffic from the GigE card to the backplane only. |
| qbVlanPortStatsTable | 1.3.6.1.4.1.4323.2.15.1.2.3 | | not-accessible | This table contains the statistics pertaining to
connection end-points on a VLAN port. |
| qbVlanPortStatsEntry | 1.3.6.1.4.1.4323.2.15.1.2.3.1 | | not-accessible | Each row provides stats data for a single VLAN port. |
| C32 qbVlanPortStatsAal5CRCErrors | 1.3.6.1.4.1.4323.2.15.1.2.3.1.1 | Counter32 | read-only | A count of the number of AAL5 CRC errors. |
| C32 qbVlanPortStatsAal5SarTimeouts | 1.3.6.1.4.1.4323.2.15.1.2.3.1.2 | Counter32 | read-only | A count of the number of AAL5 SAR timeouts. |
| C32 qbVlanPortStatsAal5OversizeSDUs | 1.3.6.1.4.1.4323.2.15.1.2.3.1.3 | Counter32 | read-only | A count of the number of AAL5 oversized SDUs. |
| C32 qbVlanPortStatsAal5UpstreamPkts | 1.3.6.1.4.1.4323.2.15.1.2.3.1.4 | Counter32 | read-only | A count of the number of packets passed in the upstream
direction. (i.e. from GigE card to backplane) |
| C32 qbVlanPortStatsAal5DownstreamPkts | 1.3.6.1.4.1.4323.2.15.1.2.3.1.5 | Counter32 | read-only | A count of the number of packets passed in the downstream
direction. (i.e. from the backplane to GigE card on this port) |
| C32 qbVlanPortStatsAal5UpstreamOctets | 1.3.6.1.4.1.4323.2.15.1.2.3.1.6 | Counter32 | read-only | A count of the number of octets passed in the upstream
direction. (i.e. from GigE card to backplane) |
| C32 qbVlanPortStatsAal5DownStreamOctets | 1.3.6.1.4.1.4323.2.15.1.2.3.1.7 | Counter32 | read-only | A count of the number of octets passed in the downstream
direction. (i.e. from the backplane to GigE card on this port) |
| C32 qbVlanPortStatsUpstreamPktDiscards | 1.3.6.1.4.1.4323.2.15.1.2.3.1.8 | Counter32 | read-only | A count of the number of packets discarded in the upstream
direction. (i.e. from GigE card to backplane) |
| C32 qbVlanPortStatsDownsteamPktDiscards | 1.3.6.1.4.1.4323.2.15.1.2.3.1.9 | Counter32 | read-only | A count of the number of packets discarded in the downstream
direction. (i.e. from the backplane to GigE card on this port) |
| qbVlanNotifications | 1.3.6.1.4.1.4323.2.15.2 | | | |
| qbVlanNotificationPrefix | 1.3.6.1.4.1.4323.2.15.2.0 | | | |
| qbVlanConformance | 1.3.6.1.4.1.4323.2.15.3 | | | |
| qbVlanCompliances | 1.3.6.1.4.1.4323.2.15.3.1 | | | |
| qbVlanCompliance | 1.3.6.1.4.1.4323.2.15.3.1.1 | | | The compliance statement for all agents that support this
MIB. A compliant agent implements all objects defined in this
MIB. |
| qbVlanGroups | 1.3.6.1.4.1.4323.2.15.3.2 | | | |
| qbVlanGroupInfo | 1.3.6.1.4.1.4323.2.15.3.2.1 | | | The set of all accessible objects in this MIB. |
