QB-ETHERNET-MIB :: qbDot3ConfigDuplexMode

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › QB-ETHERNET-MIB › qbDot3ConfigDuplexMode

qbDot3ConfigDuplexMode

Module: QB-ETHERNET-MIB

OID (symbolic): QB-ETHERNET-MIB::qbDot3ConfigDuplexMode

OID (numeric): 1.3.6.1.4.1.4323.2.5.1.2.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The configured mode of the interface.

What is qbDot3ConfigDuplexMode?

This deprecated read-write INTEGER configures the Ethernet interface's duplex mode as full(1), half(2), or auto(3), defaulting to auto per its DEFVAL. Admins set this explicitly when a duplex mismatch is suspected, since mismatched duplex settings between a switch and this device commonly cause excessive collisions or late-collision errors. For example, setting qbDot3ConfigDuplexMode to full(1) on both ends resolves a mismatch that was previously causing FCS and alignment errors on the link.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4323.2.5.1.2.1.2
snmpwalk -v2c -c public <target> QB-ETHERNET-MIB::qbDot3ConfigDuplexMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4323.2.5.1.2.1.2.1
snmpget -v2c -c public <target> QB-ETHERNET-MIB::qbDot3ConfigDuplexMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4323.2.5.1.2.1.2.1 i <value>

Start monitoring Quantum Bridge Corporation broadband access nodes (Ethernet-like interface extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the QB-ETHERNET-MIB::qbDot3ConfigDuplexMode OID value, configure state conditions and alerts, and monitor any Quantum Bridge Corporation broadband access nodes (Ethernet-like interface extensions) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4323quantumBridgeQUANTUMBRIDGE-REG
1.3.6.1.4.1.4323.2qbMibsQUANTUMBRIDGE-REG
Numeric OIDNameModule
1.3.6.1.4.1.4323.2.5qbEthernetMIBQB-ETHERNET-MIB
1.3.6.1.4.1.4323.2.5.1qbDot3ObjectsQB-ETHERNET-MIB
1.3.6.1.4.1.4323.2.5.1.2qbDot3ConfigTableQB-ETHERNET-MIB
1.3.6.1.4.1.4323.2.5.1.2.1qbDot3ConfigEntryQB-ETHERNET-MIB
1.3.6.1.4.1.4323.2.5.1.2.1.2qbDot3ConfigDuplexModeQB-ETHERNET-MIB