PW-MPLS-STD-MIB :: pwMplsPeerLdpID

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PW-MPLS-STD-MIB › pwMplsPeerLdpID

pwMplsPeerLdpID

Module: PW-MPLS-STD-MIB

OID (symbolic): PW-MPLS-STD-MIB::pwMplsPeerLdpID

OID (numeric): 1.3.6.1.2.1.181.1.1.1.7

Node type: OBJECT-TYPE

Type: MplsLdpIdentifier

Access: read-only

Description: The peer LDP identifier of the LDP session. This object SHOULD return the value zero if LDP is not used or if the value is not yet known.

What is pwMplsPeerLdpID?

This value is the peer LDP identifier of the LDP session used for this pseudowire, returning zero if LDP isn't used or the value isn't yet known. Admins check it to confirm which remote LDP peer is actually signaling this pseudowire. Seeing pwMplsPeerLdpID return zero on a pseudowire expected to use LDP signaling would prompt an admin to check whether the LDP session to the peer has actually come up.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.181.1.1.1.7
snmpwalk -v2c -c public <target> PW-MPLS-STD-MIB::pwMplsPeerLdpID

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.181.1.1.1.7.1
snmpget -v2c -c public <target> PW-MPLS-STD-MIB::pwMplsPeerLdpID.1

Start monitoring MPLS provider-edge routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PW-MPLS-STD-MIB::pwMplsPeerLdpID OID value, configure state conditions and alerts, and monitor any MPLS provider-edge routers from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.181pwMplsStdMIBPW-MPLS-STD-MIB
1.3.6.1.2.1.181.1pwMplsObjectsPW-MPLS-STD-MIB
1.3.6.1.2.1.181.1.1pwMplsTablePW-MPLS-STD-MIB
1.3.6.1.2.1.181.1.1.1pwMplsEntryPW-MPLS-STD-MIB
1.3.6.1.2.1.181.1.1.1.7pwMplsPeerLdpIDPW-MPLS-STD-MIB