PW-MPLS-STD-MIB :: pwMplsOutboundTunnelPeerLSR

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PW-MPLS-STD-MIB › pwMplsOutboundTunnelPeerLSR

pwMplsOutboundTunnelPeerLSR

Module: PW-MPLS-STD-MIB

OID (symbolic): PW-MPLS-STD-MIB::pwMplsOutboundTunnelPeerLSR

OID (numeric): 1.3.6.1.2.1.181.1.2.1.5

Node type: OBJECT-TYPE

Type: MplsLsrIdentifier

Access: read-write

Description: This object is applicable if the pwMplsMplsType mplsTe(0) bit is set, and MUST return a value of zero otherwise. It is part of the set of indexes for the outbound tunnel. Note that in most cases, it equals to pwPeerAddr.

What is pwMplsOutboundTunnelPeerLSR?

This value, applicable only when the mplsTe bit of pwMplsMplsType is set (otherwise it must be zero), is part of the index set for the outbound TE tunnel, representing the peer LSR identifier of the desired tunnel head-end; in most cases it equals the pseudowire's peer address. Admins set it as part of specifying which TE tunnel head-end toward the remote peer should carry this pseudowire. Since pwMplsOutboundTunnelPeerLSR usually matches the pseudowire's own peer address, an admin can typically set it to the same value as the PW's configured peer.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.181.1.2.1.5
snmpwalk -v2c -c public <target> PW-MPLS-STD-MIB::pwMplsOutboundTunnelPeerLSR

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.181.1.2.1.5.1
snmpget -v2c -c public <target> PW-MPLS-STD-MIB::pwMplsOutboundTunnelPeerLSR.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.181.1.2.1.5.1 s <value>

Start monitoring MPLS provider-edge routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PW-MPLS-STD-MIB::pwMplsOutboundTunnelPeerLSR OID value, configure state conditions and alerts, and monitor any MPLS provider-edge routers from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.181pwMplsStdMIBPW-MPLS-STD-MIB
1.3.6.1.2.1.181.1pwMplsObjectsPW-MPLS-STD-MIB
1.3.6.1.2.1.181.1.2pwMplsOutboundTablePW-MPLS-STD-MIB
1.3.6.1.2.1.181.1.2.1pwMplsOutboundEntryPW-MPLS-STD-MIB
1.3.6.1.2.1.181.1.2.1.5pwMplsOutboundTunnelPeerLSRPW-MPLS-STD-MIB