All MIBs › PW-MPLS-STD-MIB › pwMplsOutboundIfIndex
pwMplsOutboundIfIndex
Module: PW-MPLS-STD-MIB
OID (symbolic): PW-MPLS-STD-MIB::pwMplsOutboundIfIndex
OID (numeric): 1.3.6.1.2.1.181.1.2.1.6
Node type: OBJECT-TYPE
Type: InterfaceIndexOrZero
Access: read-write
Description: This object is applicable if the pwMplsMplsType pwOnly(0) bit is set, and MUST return a value of zero otherwise. The operator configures the ifIndex of the outbound port in this case.
What is pwMplsOutboundIfIndex?
This value, applicable only when the pwOnly bit of pwMplsMplsType is set (otherwise it must be zero), is the ifIndex of the outbound physical or logical interface the operator configures to carry this pseudowire's traffic when there's no outer MPLS tunnel. Admins set it to specify exactly which local interface directly carries a PW-only pseudowire's traffic. Setting pwMplsOutboundIfIndex to a specific interface's ifIndex routes this PW-only pseudowire's traffic out that exact port rather than through an MPLS tunnel.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.181.1.2.1.6 snmpwalk -v2c -c public <target> PW-MPLS-STD-MIB::pwMplsOutboundIfIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.181.1.2.1.6.1 snmpget -v2c -c public <target> PW-MPLS-STD-MIB::pwMplsOutboundIfIndex.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.181.1.2.1.6.1 s <value>
Start monitoring MPLS provider-edge routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PW-MPLS-STD-MIB::pwMplsOutboundIfIndex OID value, configure state conditions and alerts, and monitor any MPLS provider-edge routers from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.181 | pwMplsStdMIB | PW-MPLS-STD-MIB |
| 1.3.6.1.2.1.181.1 | pwMplsObjects | PW-MPLS-STD-MIB |
| 1.3.6.1.2.1.181.1.2 | pwMplsOutboundTable | PW-MPLS-STD-MIB |
| 1.3.6.1.2.1.181.1.2.1 | pwMplsOutboundEntry | PW-MPLS-STD-MIB |
| 1.3.6.1.2.1.181.1.2.1.6 | pwMplsOutboundIfIndex | PW-MPLS-STD-MIB |