All MIBs › PW-MPLS-STD-MIB › pwMplsMplsType
pwMplsMplsType
Module: PW-MPLS-STD-MIB
OID (symbolic): PW-MPLS-STD-MIB::pwMplsMplsType
OID (numeric): 1.3.6.1.2.1.181.1.1.1.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: This object is set by the operator to indicate the outer tunnel types, if existing. mplsTe(0) is used if the outer tunnel is set up by MPLS-TE, and mplsNonTe(1) is used if the outer tunnel is set up by LDP or manually. A combination of mplsTe(0) and mplsNonTe(1) MAY exist. pwOnly(2) is used if there is no outer tunnel label, i.e., in static provisioning without an MPLS tunnel. pwOnly(2) cannot be combined with mplsNonTe(1) or mplsTe(0). An implementation that can identify automatically that the peer node is directly connected MAY support the bit pwOnly(2) as read-only.
What is pwMplsMplsType?
This bitmask, set by the operator, indicates what kind of outer MPLS tunnel carries this pseudowire: mplsTe if set up by MPLS traffic engineering, mplsNonTe if set up by LDP or manually (and these two may combine), or pwOnly if there is no outer tunnel label at all, as in static provisioning without an MPLS tunnel. Admins set it to tell the device how the pseudowire's outer transport is provisioned, which then governs which other objects in this table apply. Setting pwMplsMplsType to pwOnly(2) tells the device this pseudowire has no outer MPLS tunnel and travels directly over the identified interface instead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.181.1.1.1.1 snmpwalk -v2c -c public <target> PW-MPLS-STD-MIB::pwMplsMplsType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.181.1.1.1.1.1 snmpget -v2c -c public <target> PW-MPLS-STD-MIB::pwMplsMplsType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.181.1.1.1.1.1 s <value>
Start monitoring MPLS provider-edge routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PW-MPLS-STD-MIB::pwMplsMplsType OID value, configure state conditions and alerts, and monitor any MPLS provider-edge routers from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.181 | pwMplsStdMIB | PW-MPLS-STD-MIB |
| 1.3.6.1.2.1.181.1 | pwMplsObjects | PW-MPLS-STD-MIB |
| 1.3.6.1.2.1.181.1.1 | pwMplsTable | PW-MPLS-STD-MIB |
| 1.3.6.1.2.1.181.1.1.1 | pwMplsEntry | PW-MPLS-STD-MIB |
| 1.3.6.1.2.1.181.1.1.1.1 | pwMplsMplsType | PW-MPLS-STD-MIB |