PW-DRAFT05-MIB :: pwVcFcsRetentionStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PW-DRAFT05-MIB › pwVcFcsRetentionStatus

pwVcFcsRetentionStatus

Module: PW-DRAFT05-MIB

OID (symbolic): PW-DRAFT05-MIB::pwVcFcsRetentionStatus

OID (numeric): 1.3.6.1.4.1.99999.53.0.1.2.1.29

Node type: OBJECT-TYPE

Type: Bits

Access: read-only

Description: The status of the FCS retention negotiation process based on local configuration and the remote advertisement. remoteIndicationUnknown - set if a FEC has not been received

from the remote. remoteRequestFcsRetention - indicates that the peer has requested for FCS retention. FCS retention will be used if the local node is capable and configured to use it for this PW. fcsRetentionEnabled - FCS retention is enabled (both peers were configured for FCS retention for signaled PW, or the local node is configured and capable for FCS retention. fcsRetentionDisabled - FCS retention is disabled (not configured locally or not advertised by the peer). localFcsRetentionCfgErr - Set if the local node has been configured for FCS retention but is not capable to support it. fcsRetentionFcsSizeMismatch - Set if there is a FCS size mismatch between the loacl and the peer node.

What is pwVcFcsRetentionStatus?

Reports the outcome of FCS-retention negotiation as a set of bit flags, such as whether the peer requested it, whether it ended up enabled or disabled, or whether a local configuration error or an FCS size mismatch with the peer was detected. An admin checks the 'fcsRetentionFcsSizeMismatch' or 'localFcsRetentionCfgErr' bits first when FCS retention was configured but frames are still being altered unexpectedly.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.99999.53.0.1.2.1.29
snmpwalk -v2c -c public <target> PW-DRAFT05-MIB::pwVcFcsRetentionStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.99999.53.0.1.2.1.29.1
snmpget -v2c -c public <target> PW-DRAFT05-MIB::pwVcFcsRetentionStatus.1

Start monitoring provider-edge routers offering pseudo-wire (PWE3) services, vendor-neutral standards MIB with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PW-DRAFT05-MIB::pwVcFcsRetentionStatus OID value, configure state conditions and alerts, and monitor any provider-edge routers offering pseudo-wire (PWE3) services, vendor-neutral standards MIB from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.99999iec624392IEC-62439-2-MIB
1.3.6.1.4.1.99999.53pwStdMIBPW-TC-DRAFT05-MIB
Numeric OIDNameModule
1.3.6.1.4.1.99999.53.0pwVcMIBPW-DRAFT05-MIB
1.3.6.1.4.1.99999.53.0.1pwVcObjectsPW-DRAFT05-MIB
1.3.6.1.4.1.99999.53.0.1.2pwVcTablePW-DRAFT05-MIB
1.3.6.1.4.1.99999.53.0.1.2.1pwVcEntryPW-DRAFT05-MIB
1.3.6.1.4.1.99999.53.0.1.2.1.29pwVcFcsRetentionStatusPW-DRAFT05-MIB