PSAX-DS1-MIB

All MIBs › PSAX-DS1-MIB

Organization: Lucent Technologies

Last Updated: 240701

Description: MIB for Lucent Technologies PSAX softswitch DS1 device servers, exposing system identity, protocol stack info, and DS1 interface management objects

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PSAX-DS1-MIB?

PSAX-DS1-MIB is a Lucent Technologies proprietary MIB (enterprise OID 1751, PacketStar Access Switch/PSAX platform) reporting DS1 gateway call statistics. Its objects cover DS1/protocol-info descriptors, a log-level setting, succeeded/active/failed call counts, a reload-configuration action, a gateway-delete action, and a reset-log action. As a performance/status MIB it lets an administrator watch active vs. failed DS1 gateway call counts on a Lucent PSAX platform. It is deployed on Lucent Technologies PSAX (PacketStar Access Switch) platforms. Engineers can download the PSAX-DS1-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PSAX-DS1-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Lucent Technologies PSAX (PacketStar Access Switch) platforms

Monitoring Examples

An administrator monitors failedCalls against activeCalls to catch a DS1 gateway experiencing call-setup problems on a Lucent PSAX platform.

What Can Be Monitored

DS1 gateway call success/failure counts

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
enterprises

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
ObjectName
snmpModules

From SNMPv2-TC

RowStatus
TestAndIncr
TimeStamp
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
lucent	1.3.6.1.4.1.1751
products	1.3.6.1.4.1.1751.1
softSwitch	1.3.6.1.4.1.1751.1.1198
psaxDeviceServer	1.3.6.1.4.1.1751.1.1198.6
psaxDS1	1.3.6.1.4.1.1751.1.1198.6.1			The MIB module for entities implementing the xxxx protocol.
psaxSystem	1.3.6.1.4.1.1751.1.1198.6.1.1
STR dsInfo	1.3.6.1.4.1.1751.1.1198.6.1.1.1	DisplayString	read-only	Device Server information. This value should include the full name and version identification and/or manufacturer information. It is mandatory that this contains only printable ASCII characters
STR dsProtocolInfo	1.3.6.1.4.1.1751.1.1198.6.1.1.2	DisplayString	read-only	Device Server PSAX/SIP stack information. This value should include the full name and version identification and/or manufacturer information of the PSAX/SIP Stack used in the device server implementation. It is mandatory that this contains only printable ASCII characters
INT logLevel	1.3.6.1.4.1.1751.1.1198.6.1.1.3	INTEGER	read-write	Device Server Log Level. A minimum logging level is always set for the device servers, which logs errors and warnings. If still more verbosity is required, that can be done by setting this parameter to a required level. 1. Error 2. Warning 3. Info
INT succeededCalls	1.3.6.1.4.1.1751.1.1198.6.1.1.4	INTEGER	read-only	Total number of calls successfully made since the last uptime of this device server.
INT activeCalls	1.3.6.1.4.1.1751.1.1198.6.1.1.5	INTEGER	read-only	Number of calls which are still progressing at this time by this device server
INT failedCalls	1.3.6.1.4.1.1751.1.1198.6.1.1.6	INTEGER	read-only	Total Number of calls failed since the last uptime of this device server
INT reloadConfig	1.3.6.1.4.1.1751.1.1198.6.1.1.7	INTEGER	read-write	This is to tell the device server to load it's configuration again. This is done when some configuration parameters need to be updated in the system
INT gatewayDelete	1.3.6.1.4.1.1751.1.1198.6.1.1.8	INTEGER	read-write	Informs the device server to delete the entry of the gateway from the configuration file
INT resetLog	1.3.6.1.4.1.1751.1.1198.6.1.1.9	INTEGER	read-write	To discard previous log and to start logging afresh resetLog would be used

RFC description

Lucent Technologies vendor-private MIB for managing DS1/T1 interfaces and multiservice features on PacketStar PSAX media gateway systems.

Start monitoring Lucent Technologies PSAX (PacketStar Access Switch) platforms (DS1 gateway call statistics) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PSAX-DS1-MIB

What Is PSAX-DS1-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description